Circuit Edition Toyota Corolla GR First Wash! What We Use To Strip Surface During Prep Process!
Автокөліктер мен көлік құралдары
In this video, I show what we use to prep the surface for ppf, coating or sealants on this brand new Toyota Corolla GR Circuit Edition. ►The limescale particles that are deposited on the bodywork can be caused by less than
perfect drying, summer storms, mineral-rich sandy rain or acid rain, which weigh down
and drastically reduce the life and self-cleaning effect of the previously applied protective
coating.
► #PURÌFICA solves the problem at the bottom, effectively yet gently dissolving and
chelating the calcium and mineral deposits deposited on the bodywork and residues
of contamination from acid rain.
►#PURÌFICA enhances and revitalises the features of nanocoating and of previously
applied sealants.
►#PURÌFICA does not contain waxes or sealants and does not alter the natural
performance of the protection present, thus allowing the detailer to check the effective
lifespan of the applied treatment. Thanks to its special characteristics, it ensures excellent
results also with a foam gun
Lobocosmetica Purifica......www.labocosmetica.com/wp-cont...
#PURÌFICA shampoo is very versatile and can be used in different concentrations. For maintenance
washes and to clean surfaces protected with Nano Coating, dilute 1:200 and apply with a glove.
For gritty rain, with a lot of mineral residue, or if the car has been left out in the snow, always use
as a diluted post-coating maintenance shampoo or as a pre-wash diluted 1:100, letting it set for
around 4 minutes, without allowing it to dry out, and rinse. For more severe situations, apply a
1:10 #PURÌFICA solution to the wash pad. When used with the 3pH® technique, in the first phase,
#PURÌFICA can be diluted 1:4 and sprayed with a foam gun.
To eliminate the most noticeable limescale contamination: dilute #PURÌFICA 1:10, spray it on
the surface and also on the glove or the brush; recommended for the areas with the heaviest
contamination, like chrome vehicle emblems and lettering and the plastic around the windscreen
wipers, to remove deeper contamination. For stubborn spots, heavy limescale contamination or
mineral deposits, like rust, and cement spots, we recommend using #ÈNERGO Acid Rain Water
Stain Remover.
INSTRUCTIONS FOR USE - DILUTION WITH DISPENSER
AVAILABLE FORMATS
VEHICLES
DILUIZIONI DILUTIONS
ACCESSORIES
Strong
contamination
1:3 - 1:10
Medium dirt
1:20 - 1:50
1:60 - 1:80
Superficial dirt
Foam
Gun
Nebula
LAB24 100ml Bottle 6 350
LAB23 1000ml Bottle 6 95
LAB62 4500ml Jerry Can 4 32
Code Format
Spray
SEE THE SAFETY DATA SHEET OR THE LABEL AVVERTENZE
FOR PRODUCT SAFETY INFORMATION.
DECONTAMINANT REJUVENATING
SHAMPOO FOR COATING AND
SEALANTS
#PURÌFICA
Follow The Apex Detail Support Group on Face Book for any questions, concerns or if you are in need of general detailing knowledge whatsoever!! / 946245059134747
Follow Apex Detail on INSTAGRAM for more exciting projects!!
/ apexautodetail
www.apexautosurfaceprotection...
Apex Detail Support Group (FaceBook) / 9462450
#toyota #toyotacorolla #toyotagrcorolla
Пікірлер: 55
Can you name other effective strip washes for traffic film, hard water, other contaminants?
@kimnewling5728
6 ай бұрын
I'm going to try Koch Chemie Reactivation soap next. Picked up a bottle.
@kevinb7058
6 ай бұрын
Megs wash+
@mmgwave
6 ай бұрын
Carpro Descale is amazing. Unfortunately now with all this bs I can’t get my hands on anymore they won’t ship
@danakern2440
6 ай бұрын
Turtle 🐢 Wax MAX Power car wash
@thesamsquatch5224
6 ай бұрын
My favorites are diy detail all clean and incredible suds. Drive auto appearance bucket naked wash, anything labocosmetica is fantastic as well
Brian and company... thank you for another informative video. A good detailer is always learning, and I have learned a lot from you!
Brian- great process and it shows with a great looking car ready for protection. Thanks for sharing! I’m always learning different tricks and tips.
Awesome vid Brian!! These videos are golden 💯
Very nice work as usual. You are a master! I have a white one waiting for Me tomorrow morning.
Thank you for another informative video Brian.
@apexdetail85
6 ай бұрын
My pleasure!!
Great video and demonstration Brian definitely need to get some of this in the future. Appreciate all your videos and ability to give us great useful content all the time.
@apexdetail85
6 ай бұрын
Glad to help
Good stuff!
NICE Looking Ride!!
The car is looking great already and I cannot wait to see how you put film over the car and tint the windows.
Thanks Brian!!!
@apexdetail85
6 ай бұрын
You bet!
Sweet ride!!
@apexdetail85
6 ай бұрын
Sure is!
Nice
Always enjoy watching you go thru your process. I pick things up in every one of your videos. I can tell your new shop lights you hung really help on the videos. Much, much better. I bet they help you during your details. I'm like you in that I like my decon soap a little runny. Cool video Brian. Thank you.
Gazoo Racing = GR. I have a feeling that car will see some lap times at the track🤗👍
which is your top 3 favorite pre wash? im using a pump sprayer usually.
I use car pro reset. Beautiful job
@apexdetail85
6 ай бұрын
Good choice!
@davidrichard4203
6 ай бұрын
Reset? I don't think its a acid shampoo 🤷
@joestewart8966
6 ай бұрын
@@davidrichard4203 reset is alkaline im pretty sure descale is acidic though
Can you use Purifica on coated cars for a Decon wash for salt in winter?
@apexdetail85
6 ай бұрын
Yes
Hey Brian, What's the hardness of the paint on this car? I have a 2017 Toyota Tacoma, and if I look at it wrong it scratches :(
@adrianr514
6 ай бұрын
Assume all Toyota paint with jump off the panel if it gets scared.
@apexdetail85
6 ай бұрын
Soft and thin.
How does that color look in the flesh? - is it too "baby blue"? I need to decide between the blue or white GRC Circuit...
I still have good results with Carpro Reset Is that the new place/shop?
@apexdetail85
6 ай бұрын
It is....full speed ahead!
11:39 Is that your own brand of foam cannon?
any consumer grade products to unclog a coating
@apexdetail85
6 ай бұрын
Most consumer grade are watered down to the point where the results are marginal. Another choice would be Bilt Hamber Auto Foam.
Normally APC, The Last Coat ClearSR, Bilt Hamber's Korrosol, Primus and Purifica from Labocosmetica Kamikaze 5 to remove any kind of coatings
Bryan, how are you de-linting towels?
@aarongrantthebulk
6 ай бұрын
He mentioned he uses a drier for his cloths so I’d say just that. Mine are pretty good after washing and drier
@apexdetail85
6 ай бұрын
Dryer low heat...two cycles.
enjoy your videos but 400:1its hard to imagine it works. I use Purifica and Primus regularly at recommended dilutions which are considerably stronger and sometimes these are a bit weak on dirty European cars
@adrianr514
6 ай бұрын
The purifica he’s using is 2.0 or (updated) version. Labo recommends 1:100 - 1:400 in the bucket for use as a contact wash soap for Purifica 2.0. On a new car with low/no contaminants 1:400 is more than enough as contact especially after a 1:10 pre-wash.
@apexdetail85
6 ай бұрын
👆 this.
Seems like a lot of wasted time and supplies just on washing. Usually if I am going to polish afterwards I’m not concerned about any minimal scratching caused by washing
@epattonm
6 ай бұрын
You can't do stuff like that on the internet. People will blast you in the comments section saying how unprofessional you are and that you are a hack.
@mengx94
5 ай бұрын
New brush for every sq in