CIOKS DC7 power supply - introduction
Introduction of CIOKS DC7 power supply for effect pedals.
CIOKS DC7 features:
Groundbreaking 1-inch profile (25,4mm)
2-stage switch-mode power supply topology
Ultra-low noise achieved by multi-stage filtering
7 isolated DC-outlets, 6W each
660mA at 9V DC on each outlet
4 selectable voltages on each outlet
5V USB outlet / max. 1A
24V DC auxiliary outlet / max. 2A
Individual status LED on each outlet
Global status LED
Built-in true power meter showing the total load
Universal mains input voltage 90 to 265V AC
Total maximum output power 48W
Mounting hardware for Pedaltrain and Templeaudio boards included
Compatible with CIOKS GRIP for drill-free mounting on Pedaltrain boards
12 Flex cables included
Expandable with CIOKS 4, CIOKS 8 or other compatible units
with 24V input voltage for additional isolated outputs
Designed in Denmark, assembled in Poland
5-year worldwide warranty
Specifications:
Input voltage: 90-265V AC
Output 1-7: 9V DC / 660mA or
12V DC / 500mA or
15V DC / 400mA or
18V DC / 330mA
USB output: 5V DC / max. 1A
AUX output: 24V DC / max. 2A
Total output power: 48W
Dimensions: 160x88x25,4mm (6.3x3.5x1.0”)
Weight: 500g (1.1 lbs.)
Пікірлер: 73
I just finished selling off all of my other power supplies to pick up a second DC-7. This unit is great. Most of my effects I use often are 12V and high current draw (Effectrode, Free the Tone, Etc.) and this is the only power supply I've come across that can easily handle everything I have to throw at it.
The fact that I can go to any country and just plug in and play and not forget to flip any switches is amazing.
Thanks, Poul for producing a ROCK-SOLID power supply and explaining it yourself... very hands-on you have a sub and a sale
The 24V output is pretty cool. It can power a Mooer Baby Bomb power amp, eliminating the need for wall warts completely.
@tejashbohra3311
3 жыл бұрын
Wait? Really I m building a ampless board and that would be cool if it can do that
@zeemon9623
3 жыл бұрын
@@tejashbohra3311 Yeah, you only need to solder yourself an adaptor cable. As far as I know the DC-7 24V output uses an EIAJ-05 connector.
@tejashbohra3311
3 жыл бұрын
@@zeemon9623 yeah as soon as I read your comment I started looking for the adapter and I couldn't find one
Thx you! ;) Perfect for my pedalboard nano!
Awesome! This is what we need!
Awesome power! The best!
One of the best power supplies
Ordered mine today🤩
This is awesome.
Just bought it!
Fantastic :)
Dying for this thing to finally reach Australia :'(
@nyrbsamoht
2 жыл бұрын
i found one on ebay from USA it was only 300AUD including shipping and taxes- they are being sold for $450 aud in the shops in sydney...
Those features look really appealing. However i would like to ask why this unit has different DC-outlet ports? Most companies use a specifc one and you can use old cables. Im curious on the decision. Thanks :)
In UK its not easy to catch hold of CIOKS. Could you please help. Thanks
is this a good choice to use with 6 Moogerfoogers? Do I need to buy extra cables to use with it?
i just ordered for my quad cortex. ,
Which CIOKS power supply would be good enough to power Both a Line 6 HX effects AND a HX Stomp??
Is it possible to run both Boss GT1000 Core and HX Stomp with DC7? Also AMT Electronics CP100?
Awesome but the BIG question? Will it power a Deluxe Memory Man 24volts?
Puedo instalar el dc7 debajo del pedaltrain nano plus?
Any improvement on noise level over DC10?
Does anyone know if I can power a headrush gigboard 19v with this?
Can the 24v output power a Hughes & kettner stompman?
Is pedaltrain metro 24 compatible with cioks dc7?
@725niko
Жыл бұрын
I believe it is. The dc7 is very thin. I’m thinking of getting a Metro Max though. Bit more room for more pedals
Can the 24v out be used to power a Blackstar HT-Dual (22v, 1.1A)? I would make a custom DIY cable for it if this is possible. Thanks!
@ciokspowersuppliesforeffec7533
5 жыл бұрын
Well, it is a couple Volt above the stated 22V but I would say ok to this as we already have recommended this with out older power supplies. For the Balackstar HT dirt pedals which draw just below 400mA it was enough to use two 400mA outlets at 12V in a series configuration giving you 400mA at 24V. You can do the same with DC7 and use two outlets both set to 12V and the #2200 series adapter Flex followed by a red type 2 Flex cable. The HT-Delay, HT-Reverb and HT-Modulation draw just below 600mA and here I would recommend to use the 24V AUX outlet to power one of those. We'll soon release an adapter cable so the 24V outlet can be used with any of our standard Flex cables. This solution would also be suitable for the Blackstar HT dirt pedals, the newer ones supposed to be powered of 22V.
Can you power 6 devices? H9, HX Stomp, TC Helicon Play Acoustic?
Can I get the belt buckle too?
👍
I just got this and it is fantastic - powers most of my synths including the Mother32 without the need for a current doubler - very happy Is it okay to leave the thing on all the time? pretty much 24-7 lets say? The instruments plugged into it will all be switched off but to turn it off I have to unplug it and its kind out mounted pretty good.
@tendingtropic7778
2 жыл бұрын
how did you set it correctly for the mother 32? which cable did you use?
@nyrbsamoht
2 жыл бұрын
@@tendingtropic7778 the DC7 outputs center negative polarity - but the mother requires Centre-positive. the cable colored red that comes with the dc7 should work. or use a Polarity Reversal Cable adapter on any of the normal black cables. the real beauty of the DC7 and RCA power cables is - you can make your own length and polarity power cables cheaply and easily.
@tendingtropic7778
2 жыл бұрын
@@nyrbsamoht thanks!
Can I power my Behringer synthesizers?
Boss aca in out 12 v or 9v?
Cual es la diferencia entre el cioks dc5 y el dc7? Ambos son profesionales??
The Shift Line Olympic MkIII Preamp/DI requires 12v and 600mA power to properly operate. Is it possible on the DC7 to use a Y cable between two terminals (each set at 12v) in order to sufficiently power this preamp?
@ciokspowersuppliesforeffec7533
6 жыл бұрын
Hi, if the pedal you need to power exceeds the rating of one outlet you should use two outlets in a parallel configuration using the #8800 Parallel adapter Flex followed by a Flex matching the input socket of the pedal you wish to power. Please watch another video we just did with two Effectrode pedals which are quite demanding and in most cases need two outlets to be powered correctly. Take a look at: kzread.info/dash/bejne/h4yBxNlmmsiWlag.html
@ciokspowersuppliesforeffec7533
5 жыл бұрын
The simple answer is: YES it is possible.
I'm not sure if you're still monitoring this video to answer questions. I just bought a DC-7, I have a PedalTrain Mini board (discontinued model), and it seems the DC-7 just barely fits underneath, between the rails. There is no room to use the Cioks mounting bracket ("sold separately") and I'm nervous about trying to drill holes in the pedalboard. Can I use velcro (PedalTrain brand) to attach the DC-7 underneath the board, will it hold it? (I'm not crazy about marring the DC-7 with velcro, which would cover up the screw holes). How about using zip ties, at least as a temporary solution? Hope to hear back from you, thanks.
@lijahfinch3949
Жыл бұрын
Try 3M Dual Lock! Much stronger than Velcro 😁
so you could hook up a strymon ojai to the 24 extention outlet? it looks like it could work but... someone got any input on that?
@ciokspowersuppliesforeffec7533
5 жыл бұрын
Yes, DC7 is compatible with both Ojai units and can be expanded with these. Also with new CIOKS 4 and CIOKS 8 once they become available.
@einaraarnes1378
5 жыл бұрын
@@ciokspowersuppliesforeffec7533 Can i then run the G2 from THE GIGRIG that takes 650ma and also powering all my high current pedals when ojai or the CIOKS4 are hooked up to the 24 extention outlet?
Wait, No drilling is needed with the CIOKS grip? Then how do the other 2 screws attach to the front of a pedaltrain?
@c1arkj
Жыл бұрын
By pressure.
@725niko
Жыл бұрын
They will push into the side of the body of the board. Beware of scratching that finish though if your at all anal about that sort of thing or think you may resell. I’m not so I’m probably going to pick one up
What are the dimensions of the unit?
Can you recreate a dying battery sound on a fuzz with the dc7?
@jjkshaughnessy
3 жыл бұрын
You can do that with an add on from gigrig.
I’m curious how much power the PS itself consumes, in milliamps or amps?
@nyrbsamoht
2 жыл бұрын
its 48w so if you max it out with all 9v devices it do 5.33 amps. if you had all the switches on 12v it would be about 4amps
Will you launch the other CIOKS 8 and 4 this year 2018 ?
@g.m.1672
5 жыл бұрын
Yeap i'm waiting answer for this question as well. And what will be it's dimensions also.
@ciokspowersuppliesforeffec7533
5 жыл бұрын
We now aim for a launch of CIOKS 4 around April and CIOKS 8 in June.
Hi! This works with line 6 Hx effects or stomp!? Thanks!
@ciokspowersuppliesforeffec7533
5 жыл бұрын
Our new DC7 definately works with Line 6 HX Effects. I have tested this and the results are on our FB page. Look at this: facebook.com/CIOKS/posts/1838804052864814 We'll have a closer look at the HX Firehawk and POD HD500X and measure their respective power requirements possibly already tomorrow. I'll get the HX Stomp in for testing within the next two weeks. So stay tuned.
@ciokspowersuppliesforeffec7533
5 жыл бұрын
Have a look at the new video I published yesterday with all different new Line 6 gear.
I used the USB connection for a LEDstrip. Looks cool, but doesn't have a real purpose.
25mm thick!!! the street price?
@ciokspowersuppliesforeffec7533
5 жыл бұрын
USD 229
Says nothing about the cables included.. come on
Was expecting a Texan accent. 😂.
Shut up and take my money!!! All I ever wanted in a power supply.
This fellow looks like Benny Greb
Is it possible to run both Boss GT1000 Core and HX Stomp with DC7? Also AMT Electronics CP100?