Chuck Marfione Guitar Neck Demo - CNC - Laguna Tools
Ғылым және технология
Chuck Marfione Guitar Neck Demo. In this video, North Carolina Luthier Chuck Marfione shares his process of making a guitar neck on his Laguna IQ CNC machine. Chuck is a skilled classical guitar maker who blends old world woodworking techniques with modern machine and computer aided methods to achieve a superior result and maximize his production efforts. In addition to showing you his guitar neck making process, Chuck also explains how he made various fixtures, jigs and machine modifications to further enhance his building process. You can learn more about Chuck and his guitars at www.marfioneguitars.com. Get Free CNC Information Packet at bit.ly/2mWwi3m
~-~~-~~~-~~-~
Please watch: "Make A Van A Home! with Twig Custom Builders and Laguna Tools"
• Make A Van A Home! wit...
►Contact us for more info: bit.ly/35UqV6M
►Subscribe now: bit.ly/2r5Czgc
►Instagram: bit.ly/2mph6wt
►Facebook: bit.ly/2qiHpXi
Пікірлер: 22
Great stuff Chuck thanks for the effort to share this with us.
This was so cool to watch. Thank you for this video.
Awesome video, thanks so much for posting this. You pretty much solved all my concerns with this video which makes this an easy purchase for me. Many thanks!!
Thanks Chuck!
Wonderful video! So informative!
GREAT VID AN INFO CHUCK,
Interesting video chuck . I/m in your camp .I have a lot of power tools and hand tools . Carving necks by hand is getting old. Thank you for the detailed video
WOULD BE REALY NICE TO SEE A FULL GUITAR BUILD WAS VERY IMPRESSED WITH THE NECK BUILD
Nice work. Yes Rhino is nice, I use to use it in 3d animation.
Hey Chuck nice video i got one question if you do not mind when you did your final profiling of the neck what kind of end mill did you use there i am asking this because when i do the final fine pass for my profiling when i use and ball end it will cut in to my vacuum board
Hi Chuck, i really like your fixtures, can you tell me what kind of plastic are you using and gasket material? Also do you need hudge vacuum pomp for that or automotive HVAC pump is just fine?
@chuckmarfione4976
9 жыл бұрын
The fixture material is High Density Polyethylene (HDPE). The gasket material is rubber and can be purchased from a company call Allstar Adhesives. Really great folks to deal with.
Hi Chuck, I am thinking of purchasing a machine like this, I'm especially interested in your vacuum holding fixtures! I'm guessing they are teflon with o-ring material for the vacuum seal? How much proud are the o-rings for a good seal? Thanks in advance! Tom Make mainly Banjos! Some guitars! Some fiddles!
@chuckmarfione4976
9 жыл бұрын
Hi Tom, the tables are made of High Density Polyethylene (HDPE) which is readily available. The rubber gasketing material is between .75 and 1 mm proud of the board. Hope this helps!
Why do you use the ball bits when you rout the flat surfaces?
@chuckmarfione4976
9 жыл бұрын
The ballnose bits provide the best results for a finished surface.
@hamercalif
9 жыл бұрын
And needs smaller stepover?
@chuckmarfione4976
9 жыл бұрын
Sega Zu Yes, indeed, The smaller stepover makes all the difference in terms of a smooth cut, although some very light sanding with 600 grit sandpaper gets rid of any micro-ridges.
I'm not too far from you, I'm a steel string builder about to purchase the Laguna IQ, could I come and see your setup and hang out for a bit? I can bring cigars/wine or whatever you appreciate.
@LagunaTools
6 жыл бұрын
Feel free to call us at 800.234.1976 - Lets Discuss.
is your laguna a iq