Choosing A Gas Cup Or Gas Lens | TIG Welding
Автокөліктер мен көлік құралдары
Building a fast car? Get $400 OFF the all inclusive VIP package deal: hpcdmy.co/vipy41
Practical TIG Welding course. Get started today with 50% OFF: hpcdmy.co/offery41
What is different about a gas lens compared to a gas cup or nozzle? Is there simply one option that is always better than the other?
The secret to TIG welding success lies in its ability to shield the arc from contaminants in the atmosphere using the argon shielding gas we covered in the last module. The high-pressure argon is connected to a regulator which controls the gas flow rate and supplies it to our welder where we can switch this flow on or off via our torch or foot pedal through an internal solenoid inside the machine.
We don't have a lot of variables in the supply of shielding gas and while our regulator will allow us to adjust the flow rate, our machine settings can also delay our arc start after the gas solenoid has switched which is known as pre-flow. You can also set the shielding gas to keep flowing after the arc is stopped which is called post flow.
That is only part of the control we have though as we can also use different nozzles or cups and lenses of varying sizes which help us ensure we have good coverage of argon gas over our weld no matter how big or small the job, how tight the gap, or what the material we are welding is.
In this lesson, we cover some points on those topics along with cup and lens sizing, the advantages and disadvantages of using a gas lens including tungsten stick out and manoeuvrability options along with showing you the actual difference in coverage between a gas cup and a gas lens.
Three important things to take away from this lesson are:
1.) Gas nozzles are numbered according to size from a number 3 for micro torches to a massive 24 for extreme coverage.
2.) Nozzles provide a relatively direct flow of gas which is great for welding aluminium, but more reactive metals require better coverage which is where a gas lens really comes in handy.
3.) Gas lens sizes follow a similar numbered convention and diffuse the argon, allowing it to spread out further and better shield the work area giving you the chance to produce high-quality and structurally sound welds.
This is just ONE module from the full Practical TIG Welding course available via the link above with the discount coupon.
------------------------------------
TIME STAMPS:
0:00 - Argon Pre-Flow & Post-Flow
1:01 - What Are Gas Cups/Nozzles
1:25 - Gas Cup Sizing
2:16 - Different Styles Depend On Your Torch
2:30 - A Gas Lens & Sizing
3:01 - Gas Cup Coverage Example
3:26 - Gas Lens Coverage Example
3:50 - Efficiency/Gas Savings
4:17 - Large Cup Sizing
5:05 - Careful With Your Gas Flow Settings
5:36 - Flow Rate Rule Of Thumb
6:09 - Large Cup Downsides
6:58 - Tungsten Stick-Out
7:26 - Working In The Wind
8:00 - Gas Lens And AC/DC Welding
8:38 - Key Points
9:24 - Just One Of Over 50 Modules
------------------------------------
LINKS:
🏎 Want to learn how to EFI tune? Start with some free lessons right here: hpcdmy.co/EFI101y
🚙 Start learning how to reflash tune. Sign up for the next free lesson now: hpcdmy.co/hptly
⚠️ Want to learn more about motorsport wiring? Claim your spot to the next FREE lesson: hpcdmy.co/wiringlessonyt
🧰 Learn more about Performance Engine Building by coming along to the next FREE lesson: hpcdmy.co/eby
🔧 Interested in learning how to do your own wheel alignment for the track or street? Start with a free alignment & suspension 101 lesson now: hpcdmy.co/aljyt
🛻 Learn more about performance diesel engine tuning. Start instantly with 4 free lessons: hpcdmy.co/essential-diesel-kn...
👀 Check us out: hpcdmy.co/hpa
🎧 Have a listen: hpcdmy.co/podcast
👕 Steal our wardrobe: hpcdmy.co/merchy
#highperformanceacademy #tigwelding #tig #gaslens #gascup #welding101 #fabrication #motorsportfabrication #learndriveoptimise #motorsports #buildtunedrive #carmods #freelesson
Пікірлер: 33
Building a fast car? Get $400 OFF the all inclusive VIP package deal: hpcdmy.co/vipy41 Practical TIG Welding course. Get started today with 50% OFF: hpcdmy.co/offery41 TIME STAMPS: 0:00 - Argon Pre-Flow & Post-Flow 1:01 - What Are Gas Cups/Nozzles 1:25 - Gas Cup Sizing 2:16 - Different Styles Depend On Your Torch 2:30 - A Gas Lens & Sizing 3:01 - Gas Cup Coverage Example 3:26 - Gas Lens Coverage Example 3:50 - Efficiency/Gas Savings 4:17 - Large Cup Sizing 5:05 - Careful With Your Gas Flow Settings 5:36 - Flow Rate Rule Of Thumb 6:09 - Large Cup Downsides 6:58 - Tungsten Stick-Out 7:26 - Working In The Wind 8:00 - Gas Lens And AC/DC Welding 8:38 - Key Points 9:24 - Just One Of Over 50 Modules
More quality information in one video than about 10 how to weld videos
@hpa101
Жыл бұрын
Thanks dude! Hopefully it helps a few people avoid getting tripped up by using the wrong cup size so they can instead spend the time getting some solid experience rather than chasing their tail 😎 - Taz.
@engscott78
8 ай бұрын
No kidding, this was to the point! Well worth the time to watch.
I haven't done a lot of welding so am wrapped that HPA has covered it again. Always awesome content 👍 Aussie Fan 💪🇦🇺🤘🆒
Yet another great episode about welding. You are up there with the best.
Your accent explained. Gas becomes guess. Lens becomes lins. Ten becomes tin.👍
Top quality video.
@hpa101
Жыл бұрын
Cheers for the support James, glad you enjoyed it mate - Taz.
You my friend are the best!!! learned so much from you over the years just honestly wanted to thank you. You have so much authentic quality knowledge it's so wonderful and amazing to share it with everyone. Very generous thoughtful and kind of you.
@hpa101
2 ай бұрын
Thanks for the support!
Subscription applied ! . You are like the best instructional yet ,and I watch a LOT LOT of KZread bro
@hpa101
Жыл бұрын
Appreciate that mate 😎
Great episode
@hpa101
Жыл бұрын
Cheers mate! - Taz.
What did you use to make the smoke?
How did you make the smoke? Did you like T in the output of a fog machine right after the argon comes out of the machine?
Watched this on the gram, and now adding here so the al guy at KZread notices you HPA. 😎 Who's al you ask? al-go-rhythm. #baddadjoke 😛
@hpa101
Жыл бұрын
We have a love-hate relationship with old Al 😂 Thanks man!
Wow
I wish this was HPA was available in 2014. I wouldn't of went to college LoL
@hpa101
7 ай бұрын
The knowledge existed but it's certainly amazing how it's easier and easier to access these days. Long may that last and cheers for taking the time to comment 😎 - Taz.
I made a mistake and the welder I purchased is a scratch start TIG (multi purpose MIG and stick also) so I know Aluminum is out of the question. But can I still fab up some nice exhaust and bracket related things with a scratch start?
@EdwardAhKee
Жыл бұрын
kzread.info/dash/bejne/epN42aNppt2xiKw.html
@hpa101
Жыл бұрын
You sure can. It's not the preferred setup these days, but, it is still going to get the job done if you take the time to put in some practice on it. Definitely better than no welder 😎 Experiment with a few different ways to start the arc too, some guys use a copper scratch pad, others put the filler rod to the workpiece and then the tungsten to that to avoid contamination. Note we don't dive into that in the course material specifically if you end up taking it, but there is plenty of other info that will help you out once you're confident with that aspect 🧠 - Taz.
Omg I wish I would have thought of this
@hpa101
Жыл бұрын
All good mate, now you know, you know! That's a win 😎 - Taz.
whats the difference between a gas lens collet vs gas lens cup?
@hpa101
9 ай бұрын
Basically the shape. A collet creates more turbulence in the gas flow which can draw in oxygen, defeating the purpose of using shielding gas as well as arguably requring more flow for the same coverage since it's just spitting it out all over the show, comparatively. A lens does the same functional tasks, but by design does a better job of directing the gas. This allows a few things including the ability to have your tungsten sticking out a bit further which gives you better visibility - Taz
I miss welding.
@hpa101
Жыл бұрын
Why'd you stop? - Taz.
@hyper8545
Жыл бұрын
@@hpa101 new job n i dont have my own equipment but I wana get back into a shop soon 👍🤙
@hpa101
Жыл бұрын
That's a good reason. Hope the new job is going well!