No step flashing? Whats stopping water from going under shingles?

I'm from kentucky and we use cardboard flashing and it holds up really good,really flexible and you can seal it with a couple coats of waterproof.

@philiphorner31

2 жыл бұрын

McConnell is from Kentucky and he's owned by Chi nah. Or at least thinks he owns Chi nah.

Good work. I wish you lived near me.

Nice finishing looking

Step flashing with counter flashing would be the correct way. Continuous flashing is incorrect.

@stevebabiak6997

2 жыл бұрын

And ice and water shield goes down first, then underlayment goes on top of that.

Nice job

Very nice work!

I wish you guys lived around here - because NO ONE in this area that I can find does metal flashing

Is there any real difference between a step flashed chimney and the type see. Here (cut at a diagonal) as far as longevity and water proof-ness? Thanks

@user-sk9hl7si7l

4 жыл бұрын

staircase is is correct per books.but both would serve well if done correctly,mortar back in slot is best choice,but good exterior silicone would hold up no less than mortar either.majority roofs get chimney flashing replaced with next reroof .so it really doesnt matter in grande scheme of things

What about the back ??

Crocs on a roof ur a good boss

so the other guy used 3 tubes of caulking and you basically covered the whole thing with 2310 geocel? that's basically liquid caulking that'll turn yellow in a couple of years and it'll get brittle like crazy, those one piece straight flashings always leak, i've replaced hundreds of them.

Need step shingles bud. Also should have heavier gauge, painted or stainless. Will admit, it looks better than before, but would not work on Oregon coast.

@coreyjames5608

4 жыл бұрын

You mean step flashing

@dogtaxi812

4 жыл бұрын

@@coreyjames5608 Yes, step flashing. That is one way to refer to them. I have 41 yrs in the trade and most of us have called the "step shingles" also. Google step shingle and see what comes up.

@luckyknuckles337

3 жыл бұрын

@@dogtaxi812 No you absolutely don't need step flashing. He has roof to wall flashing with the counter flashing serving the same purpose. No one cares how long you've done it with your outdated step flashing process.

@dogtaxi812

3 жыл бұрын

@@luckyknuckles337 O.K. there Sparky. Someday, when you're taking a break from picking your nose, you should think about how shingles are installed.

@harrishpersad3643

2 жыл бұрын

The clinch on the sheet meterial an the counter flashing is the main reason of the water proofing

that is one bunch of mess....wow

Why is my guy wearing crocs on a roof lmao

Haha.. a Cajun knows a Cajun. I picked up on your accent right away. I see "504". do you have any friends that can help me in the "337" ?

Looked better than it did. I'm a step and counter flashing tech. If I was going to use just a straight pan flashing. It would get ice and water shield all the way around. Still looks alot better.

@dogtaxi812

4 жыл бұрын

That's right

So you cut another groove two inches deep into a 3 5/8" brick into a chimney that already had issues. Yikes.

Illegal roofers probably

is this a joke?

👍

Depending on your location you can certainly flash differently, and have it last 10 years. Snow accumulations make a difference for sure. Thing I’m troubled by is this “brick sealer”. Totally bogus as far as I can tell. Masonry of all kinds, brick, Mortar, stone, they will absorb and shed water. They always have, ever since these materials were first used 4-5 thousand years ago. Now, suddenly in last 10-15 years homeowners are told brick chimneys need a sealant. Yeah, Right.

OMG!

wow another shingle job not step flashed on the verticle!! so it's wrong

@alcolussi2529

3 жыл бұрын

Are you saying the repair with the one piece of custom made flashing is incorrect or the original that was loaded up with caulking was incorrect?

All that work and no step flashing, too bad becuse you do clean work

@user-sk9hl7si7l

4 жыл бұрын

you havent seen his side flashing got tiny lip looking up at the bottom portion,so it diverts all water like in standing seam or tile roofs

Hack job. I'd be embarrassed

In my opinion this is wrong and I'm not even a roofer. I had this set up, one continuous flashing against the chimney and it leaked. I reroofed the area around the chimney and added step flashing about six inches in length. One step flashing one shingle, one step flashing one shingle. Then overlaid that with additional flashing embedded in masonry up top and over the flashing on the shingles. No leaks...

@jonathanderekmoseley2130

5 жыл бұрын

I'd like to see an instructional video of the method you just described

@gc7782

5 жыл бұрын

Jonathan Derek Moseley look up “Ivy Tech chimney flashing” I just did my chimney according to their eleven part tutorial. The only amendment I made to their instruction was the addition of “corner flashings” which I bought at Home Depot and placed under the step flashing.

@jonathanderekmoseley2130

5 жыл бұрын

@@gc7782 Will do, thanks for the response!

@stevebabiak6997

2 жыл бұрын

As another non-roofer, I concur. Another thing that seems wrong in this video - ice and water shield goes on first, then underlayment goes on top of that.

You cut 2" in to the brick? You lost your mind 🤣😂🤦‍♂️👎

lol. Guy in video had Crocks on

@bretkowitz5928

6 жыл бұрын

You're an idiot

lazy flashing

That is a terrible way to counterflash. Cutting the bricks weakens them. Flashing should only be engaged in the mortar joints.

Skipping too many steps.

Its a pity you guys dont use lead, it makes a far better looking job !!

Looks terrible step flashing into the mortor is the way it should be do

I bet a mexican did that

Dude you got a weird accent. When the video starts it sounds like you're from Boston and by the end of it sounds like you're from the deep south

@jesseoglidden

5 жыл бұрын

Acadien. It's beautiful.

I dont think you know about step flashings you goof

@theearthisflat6332

5 жыл бұрын

he's above your skill. Step flashing is 101 that was 303.