You do good work but you dont need to remove upper ball joint you can remove the hub bolts .The bottom hub bolt break loose with bar socket short exstention then a combo wrench to remove hub bolt . past lower ball joint .just saying it saves a step . also a tip is if you damage the dust shield and for some reason you are unable to reuse it or get a new one you will have to use a spacer to take its place . Good job Rolando
@wandajames62342 ай бұрын
Was hoping you'd mention the reluctor ring-- nobody seems to and it would be helpful to know when to replace them and what to look for in terms of damage.
@dalemihocik4732 Жыл бұрын
Nice work, you really know your stuff. I do have to give an enormous helping hand to the climate that truck lives in. You can't do it that easy if you live in N.E. Ohio. lol
@hyr0llr
Жыл бұрын
Thank you. And ive had my fair share of rusty cars living on the east coast for 6 years lol so i can feel your pain.
@leond.i.y.897210 ай бұрын
nice work brotha very helpful i was gonna take the whole steering knuckle off the truck but i see i can just pop top ball joint and replace it very helpful thank you
@hyr0llr
10 ай бұрын
Thank you for the kind words. Cheers. Let me know hot the repair goes.
@CraigSiderio11 ай бұрын
Thank you great video.
@EnriqueHernandez-et9le Жыл бұрын
Nice work you
@alejandrocastanedafraire13513 ай бұрын
What is the measurement of the dice?
@taylorbrantner1961 Жыл бұрын
What can we do if the hub is stuck?
@hyr0llr
Жыл бұрын
Im assuming because of rust?. If so see if yu can wedge a pry bar or screwdriverk between hub and knuckle. Or also put the hub bolts in a few threads and carefully hammer them with a socket you can sacrafice to create a gap between the 2. If all else fails. Unbolt the rotor and your gonna have to just hammer the crap out of hub(so youll need a new one).
@thegentleman9414
10 ай бұрын
I had to cut chunks of 2x4 and use my power steering to pry the rotors off lol... Took a sledge to mine and they were stuck stuck. Called up a couple diff neighbors and no one could get it so we did that and it worked like a dream
@Lanaberto7 ай бұрын
Rear?
@hyr0llr
7 ай бұрын
Didnt do em for this vehicle. Only had a code for the front
@manueluribe4960 Жыл бұрын
It’s a 2004 Chevy Colorado?
@hyr0llr
Жыл бұрын
05
@manueluribe4960
Жыл бұрын
@@hyr0llr Thanks to this video the mechanic was able to remove the ABS sensor... same wheel as your video!! They no longer wanted to do the work, I had to go show them your video so they could fix it yesterday!! and the troquita is Ready now.. Thank you Bro!
@hyr0llr
Жыл бұрын
@@manueluribe4960 glad to hear it work out. Cheers on your repair.
@user-fd5kz3wg9xАй бұрын
didn't even wipe off the magnet surface that the sensor reads. it's caked with brake dust.
Пікірлер: 19
You do good work but you dont need to remove upper ball joint you can remove the hub bolts .The bottom hub bolt break loose with bar socket short exstention then a combo wrench to remove hub bolt . past lower ball joint .just saying it saves a step . also a tip is if you damage the dust shield and for some reason you are unable to reuse it or get a new one you will have to use a spacer to take its place . Good job Rolando
Was hoping you'd mention the reluctor ring-- nobody seems to and it would be helpful to know when to replace them and what to look for in terms of damage.
Nice work, you really know your stuff. I do have to give an enormous helping hand to the climate that truck lives in. You can't do it that easy if you live in N.E. Ohio. lol
@hyr0llr
Жыл бұрын
Thank you. And ive had my fair share of rusty cars living on the east coast for 6 years lol so i can feel your pain.
nice work brotha very helpful i was gonna take the whole steering knuckle off the truck but i see i can just pop top ball joint and replace it very helpful thank you
@hyr0llr
10 ай бұрын
Thank you for the kind words. Cheers. Let me know hot the repair goes.
Thank you great video.
Nice work you
What is the measurement of the dice?
What can we do if the hub is stuck?
@hyr0llr
Жыл бұрын
Im assuming because of rust?. If so see if yu can wedge a pry bar or screwdriverk between hub and knuckle. Or also put the hub bolts in a few threads and carefully hammer them with a socket you can sacrafice to create a gap between the 2. If all else fails. Unbolt the rotor and your gonna have to just hammer the crap out of hub(so youll need a new one).
@thegentleman9414
10 ай бұрын
I had to cut chunks of 2x4 and use my power steering to pry the rotors off lol... Took a sledge to mine and they were stuck stuck. Called up a couple diff neighbors and no one could get it so we did that and it worked like a dream
Rear?
@hyr0llr
7 ай бұрын
Didnt do em for this vehicle. Only had a code for the front
It’s a 2004 Chevy Colorado?
@hyr0llr
Жыл бұрын
05
@manueluribe4960
Жыл бұрын
@@hyr0llr Thanks to this video the mechanic was able to remove the ABS sensor... same wheel as your video!! They no longer wanted to do the work, I had to go show them your video so they could fix it yesterday!! and the troquita is Ready now.. Thank you Bro!
@hyr0llr
Жыл бұрын
@@manueluribe4960 glad to hear it work out. Cheers on your repair.
didn't even wipe off the magnet surface that the sensor reads. it's caked with brake dust.