kewl might need to get me one of those! thanks for the share! stay awesome!

@ReadytoRunRC

Жыл бұрын

They’re really cheap too. Mine was like $12.

Thank you for teaching us how to use the programmer and hopefully you figured out your situation. Let us know what was wrong with it.

I recently modified my raster redbull RB18 F1 rc car to brushless and I had the same cogging issue. Now I'm waiting for the program card coming to my house to fix the cogging issue. (Running on 2s 100c 1550mah lipo,brushless 2430 5800KV motor,25a cool rc brushless esc,flysky fs-gt3b,SG90 servo)

I had the same issue with a similar Goolrc RC on my 10th scale HSP and ended up finding that the forward throttle I think it's number 16 when I played with those values I finally got it too get rid of the coging with also playing with the power from items 3 &4

@ReadytoRunRC

Жыл бұрын

Good to know. I will have to check out those settings and hopefully it solves the cogging issue or at least lessens it.

@everythingisvibration

Жыл бұрын

Thanks, Ill try it out..

Fixed my hesitation quiet abit and much more controllable now thank you

@ReadytoRunRC

Жыл бұрын

Glad this video helped out!

@soumiksaha720

10 ай бұрын

​@@ReadytoRunRCafter changing the value using programing card esc forward and backward not working . how can i solved this problem

Hi! after programming mine my ESC doesn't arm... I have throttle at 0 (no trimming), I've recalibrated the throttle and steering on my remote (RadioLink RC6GS v3), and there is no way to make the engine run... only beeps. :(

so the 12 = 11? 13 = 12 and so on because it jumps from 10 to 12, do you have any explanation? thank you

Mine also cogs as well as going a slow cruising speed straight to taking off. No happy medium. It sucks.

Thanks for the video. Mine cogged really badly and was super hesitant. I just cranked both no.3 & no.4 up to the max and the problem has gone. No idea why they sell the esc with this silly stock setting, but hope this helps.

@ReadytoRunRC

10 ай бұрын

I'll have to try that then. Thanks for the helpful tip.

@gallar79

6 ай бұрын

Me too. N3 to 10, and allí ok

Merry christmas everyone!

@ReadytoRunRC

Жыл бұрын

Merry Christmas!

I bought one of those cheap motors once and i was having the same problem. I come to find that the bullet connectors to the motor were soldered quite terribly and i think with lead and not solder. So i cut the end off and trashed them. Got myself some new connectors, soldered them on and BOOM no cogging. I suggest trying the same.

@ReadytoRunRC

8 ай бұрын

Very helpful tip. I will have to take a look at that. Never would’ve thought but makes sense.

The Problem is not the motor but also the driving Mode. You must Trigger twice to run backwards? Thats the boat or crawler Mode. But on this Card isn't an Option for that or you must change the Value for Item 1. Best regards

Sometimes even after programming they still cogg and it is because the ESC is not completely compatible with the motor but I have seen guys switch the pinion to a bigger size and it stopped cogging

@ReadytoRunRC

Жыл бұрын

Thats definitely something I will have to try out.

You actually have to change starting to AT LEAST 8, better yet a 9 to get rid of cogging. Also the item number I had to change was #2 so maybe double check that. Same system and card, it was item#2 to an 8 or 9, possibly even yours shows it as item 4 but it's a misprint and is actually item 2? I don't know. also in my experience on systems you can't get rid of cogging, it was the ESC not the motor, just a tip if it don't work for ya 👍🏻

@ReadytoRunRC

Жыл бұрын

I’ll try #2 out. I put a different motor on then in a different video and it still cogged just a little but not as much. Thanks for the info.

I don't know why nobody talks about it but it is basically a "problem" of non sensored brushless motors. Even top brand non sensored are like this. The issue can be reduced very much using lowering the gearing and using a 6 poles motor, but is not a real issue, it's a characteristic.

your engine is good. you have to change Iten 16 value 1

What kind of esc and motor combo did u buy??

@ReadytoRunRC

Жыл бұрын

GoolRC

@lukerecore3211

Жыл бұрын

@@ReadytoRunRC Oh now I know why u were using a gool rc esc tuning card. Great video bro.

@ReadytoRunRC

Жыл бұрын

@@lukerecore3211 thanks!

Is it a censored motor because sometimes that will happen with non-censored motors.

@ReadytoRunRC

Жыл бұрын

It is non censored. I may have mentioned that in the first speed run video as being the reason why it cogs. I'm not sure.

Can you make a new video you never actually change the value for start mode that was item 3 not 4

@ReadytoRunRC

Жыл бұрын

I changed both. I only showed changing the one.

You selected the wrong item for 'start mode'...in the video you selected item 4, when it's actually item 3.

@ReadytoRunRC

Жыл бұрын

I also selected 3 which was not shown. I was out of frame when I selected it so I didn’t put it in the video when I edited it. Even though it wasn’t shown I did in fact select 3.