I enjoy this thoroughly. No bullshit overdriven intro, just getting straight into the intriguing problem and working on it with very little to use. I hope the content format never changes

@MrCheckmateMarine

2 жыл бұрын

The intriguing problem is them. They are the cause of all these failures since they don't assemble the transmissions following the proper guidelines. Just because it works doesn't mean it will last. And they obviously don't!

@jameskuberski9621

2 жыл бұрын

@@MrCheckmateMarine you are right. It wont last long. There are some delicate procedures overstepped here that will result in premature failure- one being the improper tightening that is performed in several areas of the repair. I would never reference this for anything other than just enjoyable to watch, especially for what little they have to get it going. Not educational.

@MrCheckmateMarine

2 жыл бұрын

@@jameskuberski9621 The point is is that they could be so much better for so little extra effort. But they will not bother. They are too dumb or too lazy to bother. That is the real problem.

@gersoncosta7104

2 жыл бұрын

Muito bom comentario..com tão pouca ferramenta fazem um bom trabalho..

Real professionals these team..they know how to dismantle and install without missing anything.. hats off.

The best part is the whole family on any age is there to take it for future may god bless the whole crew proud of you

@ckra2001

2 жыл бұрын

Yey child labour, hurray!

@joeylawn36111

2 жыл бұрын

@@ckra2001 Not quite as bad when those boys are working beside their fathers/uncles. The adults in this case won't (usually, anyway) overwork and/or abuse them.

@DerekGraham777

2 жыл бұрын

Are you smoking crack its child labour and they aint learning much that trans is completely fucked and they are making a poor attempt at rebuilding it

I love how his sons are watching and assisting their father with the tear down and re-assembly! They too will become talented men as their father; May God Bless the family!

@brianmilligan1787

Жыл бұрын

They all are little geniuses Their father will end up very proud Pure talent love it

Не ну так каждый может, взял новую деталь и поставил. Надо было по Пакистански: корпус планетарки заварить гнутыми электродами, а шестеренкам зубья нарастить ею же и болгаркой подравнять! 😂😂😂😂

Great Job. You should let the video finish until the gear is put it back on the Truck. 😉. Greetings from Panamá.

Young mechanic : On how many N/m should that bolt be tightened. Experienced mechanic: 3 moderate hits with the 1.5 kg hammer.

@johnsheetz6639

2 жыл бұрын

Hah😂

@dennisyoung4631

2 жыл бұрын

Maybe they could make that work, but I rather doubt I could!

@putriuty5257

2 жыл бұрын

@@dennisyoung4631 ..

It amazes me what these guys accomplish with less than ideal conditions and far from the manufacturers recommended tools, etc, and make it work...

@danieltaon7333

2 жыл бұрын

i wonder for how long....

@chromeplatedcowboy1303

2 жыл бұрын

@@danieltaon7333 for long as need be

@dtiydr

2 жыл бұрын

Oh it will work even if a chimpanzee would have done it, but it won't hold for nearly as long as if everything was built according to manufacturer specification. I would never have let them to fix my car gearbox after have seeing this.

@DonLuc23

2 жыл бұрын

@@dtiydr I agree, just amazes me that they can tear it apart and get it back together, I can get anything apart, but, putting it back together and working......

@dtiydr

2 жыл бұрын

@@DonLuc23 Just have an order to where it should go and put it in such a way that it cant be put wrong and it will work fine. Or take photo just before you take on thing apart and then its just to go through the pictures and you will know exactly where everything will need to go.

Impact wrench? Nope. Torque wrench? Nope. Snap ring pliers? Nope. Hydraulic press? Nope, we're good.

@joeylawn36111

2 жыл бұрын

There are other vids on YT of Pakistani truck mechanics that show them using all of those except the torque wrench. One even has one guy working an albeit older electrical machine that adjusts a diesel fuel pump for the proper injection order.

Always a good idea to film the taking apart so when assembling one can have some guidance!

@Justme-jt1ef

2 жыл бұрын

Lmao

@Radionut

2 жыл бұрын

@@Justme-jt1ef These guys could do this in their sleep. They probably done hundreds or even thousands of them and it’s just automatic

@Justme-jt1ef

2 жыл бұрын

@@Radionut lmfao

These guys have never seen a torque wrench in their entire lives.... Skilled lil' dudes, though..

No manual or torque wrench just sheer experience. I think one of them trained in Germany when he said "Gutentight"!

these are real mechanics, they understood how it works and work as a real team, great !

I was gonna say "how the heck do they keep all that straight with so many helping" but i've seen the trucks and how theyre driven, these truck workshops defo have job security

Totally amazing it never ceases to amaze me that every single component part of any given vehicle seems to be readily available off of the shelf

@joeylawn36111

2 жыл бұрын

Except that part that they mentioned the price on most likely had to be ordered and shipped to them....

@danhammond8406

2 жыл бұрын

They blow up so many transmissions, axles, engines from overloading, lack of matainance, crappy roads that's theres plenty of parts to go around.

The team work is amazing good job guys I like watching your videos.

@amazingthingtechnology1595

2 жыл бұрын

Thank you sir

Transmissão é como montar um quebra cabeça, quebrou o redutor, as engrenagens , interessante os anéis de câmbio, marchas, good work 🚜🌾

It amazes me how he remembers all parts to put together in sequence. These are genius mechanics. Wow!

@E69apeTheMatrix420

2 жыл бұрын

I was thinking if I did this job I would have to take loads of pictures, number label every part. Have a massive line of order where the first one off is the last one back lined up. Bolts in labeled bags and it would take me days to complete. I also would be using power tools to speed the process up but still take me longer.

@nyaiimut2899

2 жыл бұрын

see the video recording 😂

@danhammond8406

2 жыл бұрын

I bet he does 3 a day,

@zorancalovic565

2 жыл бұрын

@@E69apeTheMatrix420 uy

@andrewallen9993

2 жыл бұрын

A genius or even mildly intelligent mechanic wouldnt fit bearings with a hammer in a filthy environment unless he wanted the repair to only last a short time.

I love watching these guys ! Like a colony of bees getting at it ! Working together ; helping each other as a team ! It's amazing how they're all on the same page ! It's almost as if they wrote the Parts & Assembly catalogue and manuals themselves !! No one Leader ; they all just pitch in and get it done !!

Awesome skillful work! & I really admire the way the whole shop attacks the issue at hand as a team 👍🏾 and know leftover mysterious pieces like my DIY work 🍺

Would make a great movie “ 6 guy’s and a gearbox “.🤣

Love these vids.. how many Pakistani does it take to rebuild a transmission? Answer: 5.2 five grown men and two boys.

These little boys will never lack anything when they grow in adulthood due to wider exposure to practical engineer at young age to that gentleman behind all these I offer my deepest salute to him ,his name will last forever and his legacy.🙏

@tuffguy8656

2 жыл бұрын

Unfortunately they live in poverty all their lives struggling to make ends meet

@dicksonondego5172

2 жыл бұрын

@@tuffguy8656 Quite unfortunate to hear that 😟😟😟

@edwinso8173

2 жыл бұрын

Those boys are probably "freelance helpers" that hang around the area, quite common in the third world (I'm from the 3rd world). Shop owners (some are former helpers themselves, some are sons who inherited the shop from their fathers) call them whenever they're needed to assist in working on a workpiece then get paid after the job is done, then off to another shop that might need their help, be it a machining shop, radiator, or battery repair, even construction, etc. They are what you call jacks of all trades. The logic behind this system is it wouldn't be financially sound for the shop owners to keep any of them on a regular daily payroll since their shops don't get a steady stream of jobs. Those boys should be in school but since their families can't afford it, they do manual labor to help put food on the table. In our country, kids might want to go to school since it's free anyway, the problem is lunch money, bus fare, etc. And besides, their parents need their help to earn a living. For a number of reasons and maybe luck, some of them makes it big in their adult life, but most don't.

Mui buen trabajo le encanta ver con los pocos recursos que teneis los grandes trabajos que haceis saludos desde españa

Excellent Job. I've done a few myself but off course, using Air, power tools. Really enjoy watching your Videos. Keep up the good work. Salutations from Ohio, USA.

Excelente trabajo,éso es lo que llamo trabajar en familia ,dios los bendiga siempre, resive un cordial saludo desde Puebla México 🇲🇽

I like watching all your videos, you guys are so great!!!!!

Amazing how fast they work ! They have funny voices too …

The Gear box is the most complex part in an automobile ! For these guys ofcourse dismantling and fixing them back is a piece of cake , every day affair 👌😃

10:57 clamping a shaft that seats a bearing or a retainer in the vise leaves marks that spoil the seating.

@bastiaoemmiami

2 жыл бұрын

I made several adaptations of "jaws" of copper, leather, nylon and wood to my vise, I have them with round and square fittings, so as not to mark the objects and pieces.

This is just real amazing mechanical work

Always solving problems. No bullshit, no moaning about conditions or not having proper equipment. Just get in there and get it fixed! Fantastic!

I have spent a year in India in total with different trips and I love walking down the backstreet's watching people work on the pavement rebuilding engines gearboxes rewinding Motors. I love Indian people and I love India as a country

@mvs65

2 жыл бұрын

This is Pakistan

@anb4351

2 жыл бұрын

This is Pakistan but it's almost the same thing in India as well

@autophyte

2 жыл бұрын

@@anb4351 Don't tell the Indians that!

@dineshchh

2 жыл бұрын

@@autophyte I am an Indian and I would agree to what AnB said.. 99% similarities as we were one nation till 1947. My father was a Truck Driver and I used to go to Mechanics very frequently with my father and what I see here is 100% similar to what I experienced. These guys are great engineers....

Excellent job, no manual required.

That takes some doing to get all that back together . I'm impressed 😊

@waynerainey2606

2 жыл бұрын

No, it’s very easy. To an uneducated dumbass it would seem complicated though.

@chuckz8053

2 жыл бұрын

@@waynerainey2606 Angry?

Если в Пакистане коробку ремонтирует 5 человек,то сколько человек будет в Индии коробку ремонтировать 😁

Muito bom. Parabéns. Saudações do Brasil.

Grandes mecânicos sem o mi mi que existe aqui no Brasil.com poucos recursos fazem um excelente trabalho.

@perksgedva4120

2 жыл бұрын

N.

Si alguien leer en español lean y esto y me dicen porque: Soy colombiano y desde que veo estos vídeos de mecánica y reparación de estos indues me pregunto porque aquí en colombia los mecánicos tienen el bendito problema de que se demoran meses en reparar un motor o meses en entregar un trabajo, porque... Y veo estos indues tan talentosos trabajando en equipo y a la fija, te desvaran te dan con el chiste del daño y ya te entregan tu carro o moto rápido solo es cuestión de horas, entonces porque aquí en Colombia le dan tanta vuelta al asunto no comprendo...pero bueno

Exelente profissional e equipe parabéns a vcs..top..

Fantástico trabalho Parabéns 👏👏👏👏👏👏👏

Nice team work, I wish I have that in my work 😞👍👍👍👍👍👍👍

Simply AMAZING..Thank you guys

The sped up footage makes them sound like really sociable chipmunks and i happen to find that mildly amusing. Great job on the box btw

De memoria saben donde va cada pieza, son fabulosos.

Во молодцы !!! Почти,как мои деды лендлизовскую технику ремонтировали, без талмудов, без динамометрических ключей, всё по наитию и РАБОТАЕТ !!!

@NLocksmith

2 жыл бұрын

Тоже интересно. Раскидали в десять рук, как знают откуда что. Ни моментов затяжки, ни приспособ, молоток и зубило)))

Всё норм 😜,не могу понять одного, нельзя сделать приспособы, съёмники,чтоб не валить по подшипникам молотком....?!

@Nyamchik-0_0

2 жыл бұрын

Этим проверяется уровень мастерства)) хотя не понятно вроде коробку могут перебрать но на остальных видосах когда двигатель собирают даже порядок обтяжки не соблюдают. Похоже когда в городе появляется новая коробка появляется и организация которая ее обслуживает и перебирает раз в неделю.

pretty good job, we're spoiled over here in America, but this is down and dirty work right here. get're done!

Just so much fun to watch master mechanics at work. Very impressive.

Parabéns mestre.

Brilliant at the 15.00 minute mark, re-assembling the gearbox while talking hardcore on the cellphone. Natural born genius.

These guys make my puny mechanical aptitude and experience look totally inconsequential!

Bhai bohat awla video.bass eik suggestion hai.part rebuild abd vehicle mein refit honay kay baad driver ki comments dalo.ap ki intl audience hai unko samjh ayay gi.thanks

Love watching them teaching the young kids on how to do thing's

Who needs power tools when they have power hands

ماشاء اللہ بہت زبردست ویڈیو ہے۔۔۔"ساحل کے سکوں سے کسے انکار ہے لیکن طوفان سے لڑنے میں مزا اور ہی کچھ ہے"😊

These guys can't get parts so they have to fix everything with minimal tools...very impressive.

Of course it was overloaded! Have you seen those trucks in India?!

Very good work!!!

I have to give these guys some credit... they are a pretty good team, are pretty damn clean considering the conditions and are getting shit done. Of course we are discussing easy to work on machines however... because you aren't doing this shit on any modern truck or car, I can promise you that.

@jimbossemi-customs3129

2 жыл бұрын

There's always that one person, you are him on this video.

@SquillyMon

2 жыл бұрын

@@jimbossemi-customs3129 So you're saying I'm "The Man" then? Much obliged

@jimbossemi-customs3129

2 жыл бұрын

@@SquillyMon Sure, that's it. Enjoy being " The Man"

@SquillyMon

2 жыл бұрын

@@jimbossemi-customs3129 COOL!!!

@jimbossemi-customs3129

2 жыл бұрын

@@SquillyMon Have a great day my Squilly buddy!!

Their torquemeter is a hammer.

Excellent job. Thank you for the great video. Congratulations. Mitar Belgrade Serbia

Grandes mecanicos!!!abrazo desde Argentina

Great video n i learnt a lot with real manual tranmission gear box

Bravo pour tout le monde et surtout pour le chef de l'équipe c'est vraiment un génie.

I love this..just doing it.

Me encantan todos sus videos son unas máquinas humanas con todo respeto son muy profesionales en lo que hacen el señor es un gran maestro y les en seña alos niños todo lo que el sabe ellos aprendenderan su arte y son muy unidos que Dios los bendiga un abrazo gigante desde Colombia 🙏🙏hay les doy un lake

Absolutely geniuse work... respect to you, as you just get it done...MAGIC....

Due to overloading ? I didn’t think they knew that was a thing 🤣

well done you all work hard 😊👍

They stripped the sun gear and destroyed the planetary gearset......

@jamesb.9155

2 жыл бұрын

Once I was on a very full village bus in Goa India and as it slowly lumbered up a slope, when suddenly was this ripping sound as the gears of the rear end stripped out and the bus came to a halt. Naturally everybody got off the bus and walked.

This lead mechanic would be a mechanical engineer in almost any other country where he’d have had some more opportunity. Dude has skills! Where is this Pakistan? NW India? No indicators, no digital micrometers and not one damn torque wrench anywhere, and they get the job done!

Parabéns .essas crianças ...vão ser os futuros engenheiros 🇧🇷🇨🇮👏👏👏🤝🤝🤝

สุดยอด ช่างผู้ชำนาญงาน

I bet I know how that finger got pinched!

This is the same transmission they repaired last month and re used the oil.

@mayhemmike1789

2 жыл бұрын

😂😂😂😂 I ALMOST believe that....

@GT-fi4sk

2 жыл бұрын

I was gonna make the comment that it looks like that has been opened up recently

What gets me is that with four of them taking it apart that anybody remembers how it goes back together.

Amazing skill, with basic tools 👍

so easy lol I can do it on my own but after I’ve finished 😁 2-4 big nail screw still lay around

Great job of dismantling & reasdembling

Wrong hammer to do that ,should be brass

Thank you for a amazing video, just wanted to know how much is charged for this job.

No manuals, no machinery. Amazing work. I wonder how long he has been doing this.

@joeylawn36111

2 жыл бұрын

Long enough to where they can rebuild a truck manual transmission in their sleep.

Love watching these videos

Que bueno que trabajen en una . mesa,. Increíble!

I want to see till it run on the truck 🙏

@amazingthingtechnology1595

2 жыл бұрын

Next time

Make a list of tools wanted/needed. I have spare tools as I am sure other mechanics do also.

Companies don't need proving grounds , just send your machinery to pakistan

I'll go out on a limb here, maybe stop overloading. BTW excellent team (family) work...

And not a workshop manual insight.....respect

Very skilled mecanics.

5 person team at work...who needs power tools?

Muito Top 😃👏👏👏👏

Wow! He actually has a table now!

I was thinking same thing this guy is some kind of smart !!

How does this guy put all those parts back together from memory............................................

Team work at its best wow

Here in America they would make it a series with bullshit drama, tons of commercials but not show you segments like these, now this is real content people!

The diagonal fastening made me feel safe watching 対角締めが出来ているので安心して見ていられた

They are really clever 👍