Check out my Turbo 400 with LS engine
Автокөліктер мен көлік құралдары
I show you everything you need to know if you want to mate a TH400 to an LS style engine. You will want to check out this build with a Turbo 400 with a LS engine. I had a 6L90 mated to an LY6 and wanted to swap a modern transmission for a more durable one on our race trucks. I chose to go with TCI after some friends gave me a recommendation. So far, I cannot say enough good stuff about their business. If you are interested in one of their transmission you can check them out at
www.tciauto.com/transmissions...
Check out many of the tools I use in this video by going to www.NTDRacing.com and clicking on our amazon store. You an also find discounts on plasma tables from Langmuir Systems by following the links on our page or using code NTDRacing at checkout.
Thanks for watching.
#tciauto
Пікірлер: 22
Exactly how I would've done it. Nice work!
Great video. I would suggest not using the crankshaft adapter and instead getting the correct converter with the proper extended snout. I ran a very similiar setup to what your doing and it eventually after 3 years took out the thrust bearing in the LS engine. The adaptors doesn't allow the converter to float as much as it should and ends up pushing the crankshaft forward way more than it should. I had to replace the crank and block.
Nice! We just put a turbo 400 in ours too. We had a ford C4 before we have an old 1990s Mustang 5.0 engine we toasted the transmission in the californa 300.
@ntdracing
Жыл бұрын
The Cali 300 killed our 6L90 too.
@JDawgBuilds
Жыл бұрын
@@ntdracing those hills man…
@HandMadeWrath
11 ай бұрын
@@ntdracingwhat about your Th400?
Nice details bro!!🔥🔥🔥🔥 Do you have pics of your engine stand and that transmission holder? I would love to build them!!🔥🔥🔥🔥
How do I find your Amazon link? I couldn’t find it on your webpage. Thank you!
What dust cover do you use 👍🇦🇺
How are you setting up the efi system for this? Are you using the factory system? Trying to determine how to setup with out an electronic connection to the transmission
@ntdracing
10 ай бұрын
The TH400 is completely independent of the ECU. Not a single wire goes to this transmission. Simplifies the operation. I do need to get a good solution to rear trans fluid temp. Thanks for watching.
@coltongreysoper2134
10 ай бұрын
Which efi system are you running?
@ntdracing
10 ай бұрын
Stock EFI from the Silverado. @@coltongreysoper2134
@OMRY1561 - 4 min ago Hi nice video Great information I have 1967 cadillc th400 and 429 engine Do I need any adapter if i install 350 It1 gen2 to the th400 thank you
@ntdracing
6 ай бұрын
Not sure. Few years ago I ran into a problem with a TH400 that did not fit onto anything. Almost could not give it away. Hope you do not have the same problem. Good luck.
What was the main problem with 6l90e that you did not like?
@ntdracing
7 ай бұрын
My experience was questionable reliability. I will caveat that with saying that we used questionable gear boxes, but we would lose gears or the ability to sport shift. For racing I really wanted to eliminate things that I could not control, so a TH400 with manual valve body works better for us. I think day to day driving would be much better with a 6L90.
@cjtroutt8092
7 ай бұрын
@ntdracing thank you for the reply opportunity, and yes, when I was truck pulling th400 was great to have the the 6.0l and 6l90 I wanted to install to my street square body chevy is the cruisers just to have fun. Happy new year
Did not show us what flywheel or adapter you used
@boydco6587
5 ай бұрын
Yes he did....in depth.
@justinw523
5 ай бұрын
Alright I seen it. When I seen the transmission bolted to the engine I thought he skipped it all so I backed out of it lo, I appreciate it
12:55 that part number please