No video
Cheapest way to build a harley davison dyna KRUESI VLOG #69
Cheapest way to build a harley davison dyna KRUESI VLOG #69
in this episode we do the handle bar wiring rear tail light and a bunch of cleaning. We are building this bike as cheaply as possible to sell to one lucky customer.
We are kruesi Originals, We specialize in high performance harley davidsons, custom builds, aftermarket parts, stunt riding, road racing and all around goofy $hit
New episodes every Thursday at 6:00.
@LegendSuspensions @saddlemenusa @lawtigers305
FOOT PEGS
www.kruesiorig...
STEEL WOOL
amzn.to/47RiQiK
PATREON⬇️
Patreon.com/use...
MERCH
www.kruesiorig...
Пікірлер: 82
Blue tail light is the old school hot rod cruisers
Just did the bars on the same 05 FXDCI. Removed the battery and tray. Made manipulating the hemorrhoid a bit easier. Removed front and rear tank bolts and raised tank as much as possible. Removed a rubber plug from right side of frame just back from head tube. Made it easy to get at the last two plugs.
I was not expecting Ryan to describe my morning shitting routine while learning about the wiring 🤣
@kruesioriginals
6 ай бұрын
😁😁😂
Try never dull from eagle. Come in a can, operates similar to steel wool but does a badass job on polishing metal or correcting oxidation.
@Dipndots87-ms6ds
Ай бұрын
I love to use the never dull with a small Piece of 000 on the other side and use them both in conjunction. Definitely try that out.
#0000 wire wool is great for most parts as long as ye not too rough but I also Highly recommend Thin cooking foil, the stuff that comes on a roll. Does wonders.
@kentuckyjustice1408
28 күн бұрын
I've heard foil and coke (from a legit shop). I haven't personally tried it though.
@El33G33kGoat
28 күн бұрын
@@kentuckyjustice1408 Don't use coke as too acidic can cause issues later like some use bleach which strips the chrome as hydroclauric acid. Trust me, take ye take n see what it need n use the above #0000 wire wool and or thin alu foil, works wonders
Damn. A real pro at work.
Yo! What’s the name of that polish in that spray can that you use with the steel wool? That combo is hard as nails. Thx for the tip🤙
@SlawDawg11
6 ай бұрын
The blue and white can I believe is spray away glass cleaner
@kruesioriginals
6 ай бұрын
Windex. Any glass cleaner will work
Is there a Kruesi Comedy Tour coming soon? Asking for a friend...
@kruesioriginals
2 күн бұрын
😂😂 someday
Got a 06 lowrider with 15k miles all original for 5k fixing to build a monster
Instead of steel wool try water and aluminum foil. Super polish
I know you’re a Dynacologist but when do we get an FXR build?
@kruesioriginals
6 ай бұрын
Never
Holy Shit…you’re on it with this one…..soooo funny 🤣🤘😎🤘
@kruesioriginals
6 ай бұрын
😁😁
Hell yeah brother!
I know you probably know. The blue dotakes your taillight look purple. Just a look not safety. Take care and keep em coming.
You should build a weekend workshop or an online course in collab with get vertical. You’re dropping gems 💯💯 shouldn’t be free bro.
@kruesioriginals
6 ай бұрын
I’m just out here spreading the love so everybody else can get in on the action.
Hell yea
Gotta tuck them hemi’s back up the old dodge Durango 🤌🏻🤌🏻 💀💀💀💀💀💀💀💀💀💀😂😂😂😂😂😂😂😂
@kruesioriginals
6 ай бұрын
😂😂😂
another great video .
@kruesioriginals
6 ай бұрын
Thank you 🤘🏼🤘🏼
I got an 04 fxd and it must be a running theme I’m still finding fucked up shit from some jackass that got shit from the harbor freight dumpster outback
@kruesioriginals
6 ай бұрын
That’s all early model dynas, they’ve all been in the hands of a Tweaker once or twice
I just got one of those alignment tools for my dyna for the rear wheel and I just wanted to know, I replaced the wheel bearings and rear tire about 200 miles ago but turns out after getting the alignment tool the rear tire was misaligned the whole time. Any chance to overthink if the bearings are bad now or am I overthinking it and the bearings should be good after only riding it for 200 miles that way.
@kruesioriginals
4 ай бұрын
Check the bearings
This is an awesome series. Please remove or change out those mirrors
@kruesioriginals
6 ай бұрын
😂😂 I definitely agree on the mirrors
The live you use for the lever pins in another video, is it just regular red lube?
Hey I would like to know what you use for your bar set up .twist trottel and brakes levers.thankd
You should've left it alone and showed it to smokin Joe he would have that dirty girl cleaned up with protectall
@kruesioriginals
6 ай бұрын
😂😂 that’s a fact
i wonder if that steel wool trick will work on cymbals with a brilliant finish
@kentuckyjustice1408
28 күн бұрын
NO! Trust this old school drummer.
Whats a average bike custom done by you guys cost?
Mr kruesi, when is a position opening up at the shop??!!
Not sure if I'm watching motorcycle repairs or a veterinarian procedure. 😳
Looks like Ole Trents had a lot of practice twisting the throttle.
Ah yes the old service loop. Heat gun is the trick I use…
@fireguy8466
6 ай бұрын
Hi Trent! Watching your get vertical interview right now!
Imagine how easy working on a Dyna would be if you had tiny racoon hands. 😅
@kruesioriginals
4 ай бұрын
That would be great
We have tons of racoons come and get them please haha!!
@kruesioriginals
6 ай бұрын
Swoop me up a baby
Does anyone know the part number for that rear fender cover cap @ 7:19? Need one for my '01 FXDL.
@kruesioriginals
6 ай бұрын
They don’t make them anymore you won’t be able to get one it would be used if you could find one
You are on fire! Listening to you work on clapped out bikes and turning them into gyms has got to be the dopest shit on KZread😆 whatever transmits from your eyeballs to your brain and out your mouth is pure Comedy genius 👍 fkg “mega hack!” Haha how do you think up this shit?! Goddamn Ryan Chappelle👍👍👍
@kruesioriginals
6 ай бұрын
😂😂 it’s just the voices in my head
@alexkessler2819
6 ай бұрын
3 cigs and a 6 pack of the cheapest beer you can find
What do u think about woods cams in a 103, or what would u suggest?
@tommys2979
6 ай бұрын
Doesnt matter who makes it, find a cam tailored to your riding style.
@kruesioriginals
6 ай бұрын
We usually run a Feuling 574. Great Bolton cam usually make around 100 to 106 hp with a good pipe. Woods make great power they are good Cams they’re just a little noisy and tend to freak customers out so we don’t run them as much.
Dude you're still doing it by yourself lol
What part of oregon did you live
@kruesioriginals
3 ай бұрын
Sweet home
@TheKingspade21
3 ай бұрын
Nice im down in cottage grove
What's in a spray can?
@JackPineJeb
6 ай бұрын
Glass cleaner
@geeeee8268
6 ай бұрын
@@JackPineJeb 👍
I’m trying to sell my 2010 FLHTK that’s loaded and pick up a dyna. It’s Black Ice Pearl and I figured people would jump all over it but no dice. I’d love to have this thing, would you guys be interested in trading? I’ve got a couple local guys that would give me cash on top of their dyna but I’d rather have something straight from Kruesi.
fuggin love how much stupid comments you make while working, I do the same thing lol Thanks for the lesson.
Keep the pipes, just fab up a tapered section to go 2-1 or something. Time is money so it’s not free but it’s cheap. Unless you got a pipe for it. Doing handlebars on an early model Dyna is like Anal….just a little pressure at a time, don’t go crazy, you don’t want to get a plug stick in there….all the more reason to have your non binary friend help you do the wiring or Trent 😂
@andybyrne3542
6 ай бұрын
Also if you use the wool and some good polishing compound, those fork lowers can shine up nicely. Google it.
Yo how far u get on vet
@kruesioriginals
6 ай бұрын
The vet is pretty dialed. There will be videos coming out. Angle kit is done she shreds.
@user-uj2rr6dp5o
6 ай бұрын
Yah ikno I been watching the videos bro keep um coming can't wait for this spring time big bro
IM OXY CLEAN DUDE ALL THE WAY...ALL CAPS..
My non binary friends never wanna help me build cool shit 😂
@kruesioriginals
6 ай бұрын
They’re just not into it