Im glad to see you going with a 4l60e. Too many people always want to go with the 4l80 and like they making big power. Thanks for being honest. Stock driveshaft, stock rear end. Drivability for highway and street driving. Everything doesn’t have to be a race car. Bit by bit fellas

@drejackson1000

5 ай бұрын

Yes sir I wanted to do a depended budget build just to ride

@maddog716

5 ай бұрын

Wheels?

@drejackson1000

5 ай бұрын

@@maddog716 American 20” rally wheels

@chicanobluesaz4191

5 ай бұрын

Plus the 4L60e has a lower 1st gear ratio 👍

@Lifeofshawn248

5 ай бұрын

@@chicanobluesaz419160 has a higher first gear than a 80. 3.06 vs 2.48

Ok. These are the builds I like to see, not just the 100k rotisserie builds that will never see a highway. I want to see nice, clean daily drivers that you can go to work in, or go cruising the spot or take the All American Road Trip in. Grassroots motorsports at it's finest. Well done, sir. Well done.

Man I love honest folks that don’t be gate keeping. Thank you so much.👊🏾💯

@drejackson1000

5 ай бұрын

No problem I know what you mean on that idk why people hold info like that

@kenyontookes7644

5 ай бұрын

Man I swear you ask what they got they don’t wanna say they don’t give the price but give you a $10k+ price. First video I seen Mm someone actually go part by part with the prices and got the prices on screen to show he not bs. I fucking love it 😊

@gordocarbo

3 ай бұрын

@@drejackson1000 They wouldnt want to admit to how much they spent which is a bunch. Do wonder about the guys that think they got some secret cam.

@r.joseph8911

2 ай бұрын

@@drejackson1000thanks so much for your time doing this video. I’m doing my car soon, my first LS swap. Trying to figure out what some of the components are on the engine. I’m first going to ID the block VIN and year for sure- then go from there. The two lines (with silver locked ends and black braided runs) on the left side of the truck intake are the fuel supply and return, correct?

Good job sir! Thanks for sharing. Not all of us can afford a 10, 15, 25k build but you give us hope lol.

@jermaineflowers9906

2 ай бұрын

On bro you ain’t never lying

As a old mech, you make me smile and touch my chin, Keep up the hands on diy. THe motivation of seeing a vision of your project, to start the project, to feel the excitement of the progress, and to actually finish your project and show it off, priceless. Young man in a few years you are going to be so far advnced that pesentation will become your goal, Proper fuel connections are very important, routining wires and wire looms very important, structual integrety, cutting,moding, very important, please mount a fire extinguiser inside. use 90 degree boots on plugs so headers dont burn. time to detail alll connects. KEEP POSTING POSITIVE BLUE COLLAR FUN STUFF MANN. #BLACK HISTORY MOUTH

@drejackson1000

5 ай бұрын

Thanks a lot

@bunnyman6321

4 ай бұрын

Black history mouth 😂😂😂

Real car guys recognize and have a similar parts list 😅😂

@6.2dough

5 ай бұрын

Like what put us hip

Nothing like the satisfaction of doing your own work great job brother

$2000 is a steal, fantastic job💯

i hope you know this video is about to put you on the map.....everyone including myself is gonna want you to do LS budget builds for them this is one of the BEST LS SWAP VIDEO ON KZread i just wanna drop off my car an you tell me everything you need

@drejackson1000

5 ай бұрын

I feel you I appreciate it send me a message on FB DeAndre Jackson or IG Boxcutlass.8690

One of the realest ls swap videos ion seen appreciate it bro

Best and most detailed video i have came across for being able to actually drive your car

Only two racks that bad especially when it comes to the up most important part of the vehicle did a great job proud of you 🎉🎉🎉❤❤❤❤

@drejackson1000

5 ай бұрын

Appreciate it

Very clean and impressive.. this is how it’s done when u do ur research and put in ur own work.. too many ppl complain about bein jerked around when they don’t even try to do research.. great job, later on u can upgrade to an lines for ur fuel.. it makes it way easier with maintenance and cleans it all up

Ian gone lie it’s not the prettiest of work but it works and that’s all that matters💪🏽‼️ and you doing it yourself that’s always a plus‼️💪🏽

@drejackson1000

5 ай бұрын

Fasho appreciate I’m still working on it cus I was trying to hide alot of wires but hey it’s working lol

@truckloadslim

5 ай бұрын

@@drejackson1000 and I can’t lie you did a damn good job! And you giving out the juice if anyone hate on you for this they crazy asf

@michaelmitchell7817

5 ай бұрын

​@drejackson1000 thanks for the parts list bro. Monte is looking good love the ralleys. Bout to start on my 85 442 ttop Cutlass. I've got a very similar list of parts for mine.

@chicanobluesaz4191

5 ай бұрын

This is what I love about doing things yourself. It's trial and error and you gotta start somewhere. The key is learning from mistakes. Keep up the good work my dude!!

@drejackson1000

5 ай бұрын

@@chicanobluesaz4191 thanks a lot I love to learn

You did a heck of a great job on this sound really good

Bruh Man did his own thang! Props main. 🏁

As someone planning to get my first G body and swap it. This video is much appreciated. Thank you.

Congratulations sir! You made it happen with hard work. You impress me and thank you for sharing your journey! I'm doing a similar swap in my '55 chevy.

@Alien_Nukes

4 ай бұрын

Upload some videos of it

Good work man she looks so good!

you did a great job bro good stuff bro keep sharing the knowledge and giving people the opportunity to save themselves some money.

way more respect to you bro than any bought muscle or supercar! 30+ technician/Gear head love your build make it work detail it up later 👍

Bro this is gold. If you want to just do a swap you show exactly what you need to get to have it happen. Nice build. The hardest part for me was the transmission crossmember mount had to get it fabricated but it all worked out.

I just pull my LT1 in my bubble caprice a few days ago getting shit ready I had the motor in trans for my truck but it is cheaper to do it yourself you’re videos were very helpful Thoe bro keep it up 👍🏾

im so happy i found your channel DUDE thank you!!!!!!!

Hell yeah I like your style. I love this thing man. Thanks for the video

The carbed LS build in the caprice on my page has the same issue with the PS closeness to the pump, but it works fine. Great job on the build brother

Plain and simple I love it.💯

Awesome job looking forward to more videos

Brother Jackson job well done that all you need because you can hope in that baby and ROLL OUT anywhere you want . Much love to you and mad respect.

Much respect appreciate all the info I’m in the process of doing my swap

Thanks for the motivation doing my 84 hurst now

@drejackson1000

5 ай бұрын

No problem good luck on putting that engine in

Beautiful build , love the wheels too

Clean build can’t wait to see it on the town

Man, I bet that thing is all kinds of fun. Nice job!

Clean build fam. Keep the updates coming.

Man I miss my 86 LS. Nice ride bro.

Awsome monte man. Good work true hot rod. Built not bought

Good to see you made a decision and finished the swap...aye is 3 and 5 ignition coil boot touching exhaust manifold.

@benl4707

5 ай бұрын

Get you some wire cover for the fuel pump red wire. Wire is going from here to there and has alot of scrub points that will cause fraying.

Man I wish I was near you. You did an awesome job on the build.

looks good man congrats on the sweet ride

YOUR MC IS LOOKIN' CLEAN BRUH!!! I REALLY LIKE THE RIMS!!!

This is a Time Machine,, nice whip.

Excellent build on an excellent body. Thank you for pricing out your build and reminding everyone the joy of keeping low insurance costs and still getting good performance out of a BUILT car

Nice work bro, keep it up. The MC looking good 👍🏽

Even tho I’m seeing this a month later just shows me that you can have a nice toy for the streets frfr much respect brother

Yessir, great savings and a great build as well as ride playa.

Stumbled on this video and man homie I gotta say you got mad skillz

So glad to hear you mention be careful with those harnesses 😂 I drove myself insane with one of those. The car DID crank and ran crazy which drove me nuts trying to figure out why. Ended up the harness was pinned all sorts or wrong. Fixed the pin outs and now it's perfect but it was way off

@drejackson1000

5 ай бұрын

Wow that’s crazy I know from 2

@teabag402

5 ай бұрын

@@drejackson1000 I thought my motor had problems, ended up being the harness wires crazy

You did that I appreciate your input!!!!!!

Real clean ride, mad props👍👍👍👍

that car is clean and its driving like its factory. Nice build!!

You giving me hope. Dope video

You did that bru💪🏾💪🏾

Them wheels😍. Can’t wait to get mine soon..

Appreciate the game I just got myself a project 69 caprice 4 door she has some cancer But I’ll put some pictures on KZread soon Appreciate the motivation bro 🔥🔥🔥🔥🔥💪💪👍💯

@drejackson1000

5 ай бұрын

No problem anytime keep me updated on it

Nice looking car... nice job clean looking....be careful in the rain. I have owned many G- bodies...they will swap ends in the rain 🌧️☔. Like the tail pipe the way I always ran it...

@drejackson1000

5 ай бұрын

Thanks I tried driving in the snow it was a no go

Good shit Dre 💪🏿💪🏿

Damn i love those wheels bruh. That shit is sharp.

You didn’t add in the Febreeze vent clips. 😂 Good wool, fam! Nice to see a realistic build with a realistic price tag!!!

Good job brother car sounds and runs good. Proud of you fam 👏🏾

My guy you just motivated me

That joint is nice and you did that sh!t fam. 👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾

Man good Gbody build, really nice!The only thing i suggest is getting a good brand fuel regulator.I definitely need to make a gbody build like this!

Nice break down my guy!

Sounds great man!

Looks decent. 2011 camaro water pump and tensioner will allow a lot nicer looking upper radiator hose. The outlet is on the driver's side where it ought to be.

Great job man!!

Motivation bro, got me thinking abt LS swapping my 83 Hurst Olds myself. Was that Harness plug & play? Or ima have to rewire some things for the harness to work?

I would put spark plug covers over your wires because them headers get hot af.

@stlbold2

5 ай бұрын

I was looking for this comment. One of the headers looks like it’s physically touching the spark plug boot. Run it too long and it could melt through then start arcing. Much respect to the build though.

those rims are tight AF! 🔥🔥🔥💯

Good job bro! It looks good 👍🏾

Great video . Your organization is on point ..gonna subscribe so I can see your beast go

Thats a real nice ride. Great job on engine.

Congratulations 🎊🎈🍾 you inspired me as well

@drejackson1000

5 ай бұрын

Thanks a lot

Bro good content the information was very helpful I'm going to be doing my first swap on a 1975 monte carlo a lot of the information is very similar.....

Looks like that number 3 spark plug boot is touching the header. Think it will be problems later. Good stuff. Sounds good. I've heard a swap like this costs between $5 and 6K so great job.

@Ninoo187

4 ай бұрын

Definitely, good attention to detail.

U did a great dam job bro.

I work for stellantis but my lil ls swapped an el Camino and a regal. Thsi is awesome 😎

congrats to you bro, enjoy it

Nice that engine looks good in that 80s G body.

Nice wheels too bro

Good job looks very nice 🔥🔥🔥

Looks good! Sounds good!

Hey man I just checked out your video, I have plans of doing my first LS Swap on my 76 Chevy short wide this summer. Your video was very informative and inspiring. Do you have any plans of doing any more swaps also what would it take to hook up the speedometer and the RPM gauge? Ive been looking at buying a high mileage suburban, tahoe or a silverado for cheap and rebuilding the engine so i will have err thing I would possibly need.

Nice.Does the crimp in the upper hose cause any overheating issues?

Keep doing yeah thang geee appreciated the break down of part let me know i need to work a lil harder keep it coming geeeee 👀🍿💪 hope everything works out

That’s major 💪🏽💪🏽💪🏽

Good looking out on the list, homie

Nothing like a real working man budget no knock to the guy with big money but I like this way more feasible salute king

thank you for the deep look and information, I'm getting my nerve up to do a swap. Micky C

Them swaps make under the hood look so clean

Im glad it runs well.

Yes sir did know you was gone fire rite up like very nice .

Thanks for making this list,

@drejackson1000

5 ай бұрын

No problem

Great job sourcing those parts for good prices! I saw a couple of you spark plug boots touching the the headers, you should get spark plug boot covers for those before the boots melt. Maybe even dimple the header to make some clearance. Burnt spark plug wires create weird driveability issues. Good work.

@jamesbroomfield7799

5 ай бұрын

Could he wrap those portions of the headers with header insulation tape?

@gordocarbo

3 ай бұрын

@@jamesbroomfield7799 If the boots dont touch the headers. Otherwise they will get wrecked too.

this is awesome man so much pride and dedication!! wayy cooler than some rich dude buying a lambo off the stealership

Clean car my brother nice job very nice refreshing

great video brother!!!

With you mounting the ecm in the glovebox did you get a bracket or anything? Or did you just mount it in there?

Thanks for the info boss