Thank you for going through the effort to make this video as beautifully as you have.

@Late_Night_Unboxing

19 күн бұрын

Thank you! I'm glad you enjoyed it!

I for one am sorry to see that Monsgeek did away with the side accents, that was one feature that made the past boards stand out a bit. I´m glad to see that the PCB doesn´t have flex cuts. I like to go foam-less in my alu boards for a more clacky sound profile.

@Late_Night_Unboxing

Ай бұрын

Curious to see if they will be making the "v3 change" to other boards as well in the future.

@TheBigGiant_SpaceChiken

Ай бұрын

@@Late_Night_Unboxing Do you mean the removal of the side accents? I would hate to see that happen, but they probably will to keep things consistent. Monsgeek had said that they were going to make the side accents available in other colors. Too bad they went back on their word and decided just to remove them. I think that now, it looks kinda boring to be honest.

@Late_Night_Unboxing

28 күн бұрын

@@TheBigGiant_SpaceChiken I agree that they probably will remove the side accents for other keyboards. Side accents with other colors would be really cool though. Too bad it never happened.

i actually prefer the no accent design. i ordered one today!

Curious to know what you think about the removal of the accent piece? Which is probably the most significant difference between the M1W and the new M1 V3. Do you prefer the accent piece or the minimalist look?

@lornelorne5727

26 күн бұрын

Looks really plain and boring without the accent.

@minhquanvu2944

3 күн бұрын

It looks like a 40$ board from an offbrand oem. The floating knob looks so cheap. Overall a downgrade.

What do you use the knob on the keyboard for? I've seen it on other keyboard but don't know what it's used for

@Late_Night_Unboxing

Ай бұрын

By default, it toggles between RGB brightness and volume control.

Lol when I look at the shop they still have the purple stabilizers. The only one I found with black stabs was the one on the Monsgeek US store. Everything in either Akko DE, EU or Monsgeek EU still has the purple ones despite it being literally the same model. Monsgeek M1 V3 QMK, VIA or M1W V3. Despite that making pretty much zero sense in the first place what would even be the differences? Also the spec sheet where you can look up the differences between the newer and older models obv only talks about the international version.

@Late_Night_Unboxing

20 күн бұрын

They have a comparison of all the M1 variants on their FAQ page.

well I got this for like 2 weeks ago and I wet the whole board yesterday (hangover) and after a day I just assembled my whole m1wv3 and works still fine, do be careful tho there are excess lube on the pcb which can be taken off easily with alcohol. I love my board already since it sounds pretty clacky with the Gateron Milky Red Pros I got.

@Late_Night_Unboxing

Ай бұрын

Glad it turned out fine! There was a bit of excess lube on mine as well which was probably from the stabs.

@thetrashman5258

29 күн бұрын

@@Late_Night_Unboxing oh yea I'd like to tell you the difference of mine vs yours, mine came with the purple stabs and did not include a coiled cable and a screw in stabs set which was a bummer coz I wanna try using it

Latency?

I've got this keyboard for almost a month now. I came from Corsair K70 Lux - Cherry MX Red and was bought around 2017. I can definitely say that the sound is very satisfying compared to what I used for the last 7 years or so. The stock is already great but I have been thinking to use the included Tape for the Tape Mod and Teflon Pads for the Force Break Mod, should I do it?

@Late_Night_Unboxing

9 күн бұрын

Sure, you can give it a try. It's easily reversible if you don't like it. The force break mod won't make a huge difference, but the tape mod will have a much more prominent effect. Personally I think the included "tape" sheet is not that convenient as you'd need to cut out the holes for the battery yourself. I prefer masking tape. You can check out my M7 mod video if you're interested.

@BertwinStaAna

8 күн бұрын

@@Late_Night_Unboxing Thank you so much for the reply. I watched that M7 Mod vid and decided now that I am going to use masking/painters tape for the Tape Mod and will decide whether I will go for the Force Break Mod (since I will be opening the keyboard anyways).

Would you say the switch to spray coating is a dealbreaker? Considering getting an M1

@Late_Night_Unboxing

Ай бұрын

For me, I’m fine with the spray coating. But in theory, anodizing should be a more durable finish if the keyboard gets banged around a lot. Personally I much prefer the minimalistic look on the v3 compared to the m1 with side accents.

@thetrashman5258

Ай бұрын

well the aluminum is die casted compared to the older versions which are cnc

@joshm264

Ай бұрын

@@thetrashman5258 their own website says it's still CNC so

@Late_Night_Unboxing

28 күн бұрын

@@thetrashman5258 According to Monsgeek, the V3s are CNC'd not cast. Just spray coated instead of andodized.

@yoyomaster989

20 күн бұрын

​@@Late_Night_UnboxingThe chinese model is die cast btw and also lacks qmk via support unlike the international model.

Hey bro i just got this keeb, everything is good, but when i am on wire mode there is i believe a charging indicator with big red light at the spacebar is there like a way to disable that? Please

@Late_Night_Unboxing

28 күн бұрын

Hi. The charging indicator works independently to the RGBs and cannot be turned off. However, if you only plan to use it wired, you can unplug the battery and the charging light won't light up even when you're using it wired.

@Late_Night_Unboxing

28 күн бұрын

Or maybe you can cover the LED and put a piece of electrical tape on the PCB.

why do i watch these videos? why is it so satisfying? I have my own for crying out loud and mine is creamier than half the ones on here lol.

@Late_Night_Unboxing

Ай бұрын

At least it’s satisfying to watch. You can also appreciate what you like about your current boards. Until the next video… 😂

Is the PCB and the built-in chip exactly the same as in the previous version?

@Late_Night_Unboxing

4 күн бұрын

Not sure about that. I don't have the old M1 to compare.

@user-km7qr4kx1q

3 күн бұрын

@@Late_Night_Unboxing oh ok but thanks for your answer anyway

Was that a faulty green RGB?

@Late_Night_Unboxing

24 күн бұрын

The RGBs work alright. It might be the frame rate of the video, causing to look faulty.

oh mine came with the purple stabilizers?

@Late_Night_Unboxing

Ай бұрын

Hmm, is yours the M1W with side accents?

@yoyomaster989

20 күн бұрын

you might have the chinese version. i have the cn version and it came with purple stabs

How to change the mode from wired to wireless?

@Late_Night_Unboxing

7 күн бұрын

You have to pull the caps lock keycap off and switch to wireless mode. Then connect to the 2.4ghz dongle or a Bluetooth device.

@johncapistrano5913

6 күн бұрын

@@Late_Night_Unboxing damn i thought there's like a key shorcut like fn+1 or something

I was tricked into buying the k65 wireless plus(Corsair) at BestBuy, because when youre inside the store youre essentially hypnotized into buying at least one item, for the same price this Keyboard is way better

@Late_Night_Unboxing

23 сағат бұрын

We all make mistakes, but I hope the Corsair isn't that bad. Haven't had a chance to try a Corsair yet.

$80 ain't cheap

@habrakhamage

Ай бұрын

a few years ago for a thoccy keyboard like that the prices ranged from 150 to 300 bucks and most hot swappable keyboards for enthusiasts are above that price so it kinda is

@Late_Night_Unboxing

Ай бұрын

It’s relatively budget friendly in the world of aluminum keyboards.