I have spent embarrassing amounts of money on this hobby and I agree without hesitation. Through speakers, I can't tell the difference most of the time between a $35 VM95C, VM540ML, 2M Blue...seriously. A cheap AT91 sounds great through speakers. With headphones it's splitting hairs. Once you setting on a good table and phono preamp, the stylus/cart becomes less of a factor. This is assuming your records are clean. I had an Audio Technica AT-LP60 in the shed just for kicks and it sounded amazing with a cheap stylus. At one point, after the tinkering it has to be about the music anyway or we are all just wasting a lot of time and money.

@z90012

2 жыл бұрын

Well said mate👍☺️

@moochops2

2 жыл бұрын

Agreed!

@cmkilcullen8176

5 ай бұрын

Also agree. Loved this video. Well done, sir.

@Abruzzo333

3 ай бұрын

I agree, although I can hear a big difference even on KZread with some of moving coil cartridges. Not even super highend ones but even something like the AT-OC9XEB offers a striking difference over the garden variety cartridges such as those shown in this video.

@MegaPalesz

21 күн бұрын

You put it very well! If your stuff is good, the cartridge doesn't do much anymore

I've just got my first turntable ever and it has this very cartridge. I wasn't expecting much, to be honest. But, with a good pair of studio headphones (ATH50X) the amount of sound quality you get for, basically, the price of a steak is astonishing. Yes, It doesn't forgive dust and imperfections but... on a clean and well maintained record.. it's just a joy to listen. Rich and well balanced sound I must say, and comfortable too for long listening periods.

Our local radio station in the UK used Ortofon OM pros, i went in twice and had a listen and the turntables-EMT- sounded outstanding

What an awesome little cart, thanks for sharing this you do amazing work.

The AT-VM95 series is amazing value for money and offers an upgrade path that simply requires a stylus change. It is definitely worth it. I went from the E to the ML and although it was expensive, I regret nothing :D

@johnb6723

Жыл бұрын

The ML has a longer life than the C or E - about two or three times as long.

What I'm amazed about is how clean the records are that you used as examples. I didn't hear a single pop or crack.

@HiFisquarepants

3 жыл бұрын

That's because most of the times I use pristine records. Anyway, I also have crackling records, of course: kzread.info/dash/bejne/iYiIus6qocrOhKw.html kzread.info/dash/bejne/c4qYy9Kxaa3Qg5c.html

Excellent vid. Ian from hivinyws and I have spoken at length about lower end carts on a turntable with a solid plinth and a high quality tonearm. He actually did a vid about it with a Rega P1 and the stock “Rega Carbon” cart, which is just a rebranded AT 3600 that costs a lot more. I’ve tried the same test too with my upgraded and modded by KAB SL1200 MK5 and refurbished vintage Sansui belt drive deck. I put a crappy cart on my MK5 and a nice one on the Sansui, and the MK5 sounded much better. Of course, there’s more at play, but that’s the gist of it. I’ve been a record collector for 30+ yrs and an audiophile for aprox 15-20 yrs or so, and you just get to a point where you much prefer to just use a nice high quality turntable, cartridge, and phono pre (I dig tubes here), but you certainly proved a point with which I’ve experimented with in the past, only to yield rather surprising results, and similar to your own. High quality mixed and mastered specifically for vinyl records play a huge part too, which you’ve obviously got plenty of!

I have an old DUAL CS604. It is equipped with a DMS242E originally manufactured by AT for DUAL 42 years ago. The needle, a DN242, is hard to get and an original needle cost you as much as a AT-VM95E cartridge plus the DUAL headshell. So I gave it a try. Fitting was easy and straightforward as the DUAL headshells also support 1/2 inch. As I have no stylus gauge I first adjusted the overhang by comparing the position of the old needle with the new one. Luckily the height of the systems are the same, so no shims or tonearm adjustments necessary (which are not possible on DUAL's as they have fixed arms) Then I fitted the shell onto the tonearm and checked the overhang with the print out of a DIN overhang gauge. Thanks to DUAL's snap design from the start it met the requirements, so no further adjustments necessary. When I listened to the first records, I could sense a positive difference from the beginning. The AT-VM95E has a very distinct tonal range and because of it's better channel separation and higher frequency range, you hear much more. The detail reproduced let's you hear things on your 42 year old records, that your old cartridge just couldn't fathom. Overall I must say it is a very good cartridge which is not "cheap", but inexpensive. As I change my styli regularily every 300 h it is also very economic. I also listened to the other needles here and I plan on getting the AT-VMN95ML which to me sounds brilliant and with a thousand hrs runtime it costs the same as the VMN95E which has 300 hrs. So I definitely recommend the AT-VM95 as an upgrade for your old DUAL turntable. ;-)

Wow what a quality video. Thank you. I mean it. I am a rookie in this field, who just repaired his dad old phono (Yamaha P-320) and want to replace the old stylus/cartridge (CG-7700). And I am happy to hear i dont esentially need to pay a lot for decent listening experience.

Great video. Know what sound you like. Get gear oriented in that direction (bright to warm), spend moderately. Get good pressings. Unfortunately, one does not know how good or badly a record was produced and pressed until you get it and hear it. But once you have good pressing, you're golden. Having said that, I am more convinced than ever, that great record production was always possible. The CD market, while a great innovation, did not have to blow out the record market, but it did. For a while. Over complicating the record / audio gear market with greed can blow out the record market again- I fear. Your video is timely and welcomed. Thank you.

I've had my Technics 1200s for 25 years now. I've only used 2 brands of cartidges...Stanton Trackmaster II and now Ortofon Pro-S. Have the tone arm counter balance set at 3.5 grams. Last year I found a pair of Technics SB-A27 speakers on Craigslist for $150 and the guy threw in a Sherwood receiver just to get rid of it. Reviews on the receiver were not so favorable but I have no complaints. Everything sounds crisp, balanced and makes my Drum & Bass records sound awesome. Lows/mids/highs are perfect for my taste.

Excellent video, thanks! Indeed, a high quality record is more important than a more expensive cart. However, in order not to mislead, it all depends on the whole system. If your amp and speakers are cheap to medium, the presented cart is fine. If you have high end equipment, you need a much better cart to match. Some of us have plenty of old records, so a good but forgiving cart is required.

This is a timely post for me. I have a number of MM cartridges including a VM95 ML, all of which I rotate a month at a time. I have just scored an Audio Technica AT95E and an Audio Technica Headshell. This of course is the predecessor to the VM Series. Whilst I was on the Bay I also ordered a new AT95EX stylist. My reasons behind this is the eventual upgrade path through to the LP Gear AT95SS ( a nude Shibata stylus). Cost has been the main driver, I'm afraid the Ortofon 2M Black is so close to MC prices that it becomes necessary to say 'hang on a minute' what exactly am I trying to get out of my system. At my age, 66, the hearing is like it or not decreasing, so it 's time to draw the line and just enjoy my music collection. Thank you for posting this video.

@luisrodriguez8639

4 жыл бұрын

HANA is 2 times better than Ortofon 2M Black for almost same price

Thank you for this video. Just ordered the VM95C. When the time comes, I'll upgrade the stylus depending on my budget.

A couple years ago I modified a Technics SL-Q2 and the owner sent his AT--VM95E with it. I did a comparison video afterward and I have to admit it sounded pretty damn good! I didn't realize they have a Shibata stylus for it also - interesting!

All of them on this series are best buys. The ML and SH could seem expensive, but the durability of them is way longer than conical or elliptical stylus ones, approximately 800 hours for the shibata and 1k for the micro linear.

I don't have the best of turntables to say the least! But I put an elliptical stylus upgrade on it, along with an outboard preamp! And the resolution is plenty high! I'm proof you CAN have hi resolution/ fidelity with inexpensive equipment!

I am starting to think that the pressing is 80% & the cart is 20%. Nice clear sound from this cart but it's a great vinyl pressing!

@keithwiebe1787

4 жыл бұрын

I agree. I got an cheap 3600LE to replace my old Pickering and it sounds ok but did not solve the distortion I heard on a lot of pressings and they were pressings I bought new. I came to the conclusion it's all in the pressing. On good audiophile pressings I get no distortion. That's why I mostly play cd's these days.

@MrAndreferrari

3 жыл бұрын

Audiophile pressings and most new regular pressings are made to handle well conical. But you can't find everything you want reissued on mofi.

@urbanknish6965

3 жыл бұрын

Clean records, a good level table and preamp and the rest is cake. Leave the fussing to the OCD people and we'll take the music which is the whole point right?

@cmkilcullen8176

3 жыл бұрын

Right..that is a great pressing and master..

@shumeister1059

3 жыл бұрын

If pressing isn't good, then it ruins everything else down the line. Which you can try to correct, it'll never be quite right.

Very nice cart. I listened to all the shootout videos and also recommend the discontinued but available AT100e for

Technics M5G headshell with headshell weight to control the resonance frequency. Also some quality headshell wiring. Nice, you really paid attention to the details! 👍

@HiFisquarepants

3 жыл бұрын

😉👍

Thanks for going the extra mile. It's appreciated. :)

@michelrichert9052

4 жыл бұрын

Quintet carts are not that good .. they are cheap MC carts .. they don't deliver the kind of sound you should get with an MC .. Ortofon is not the best choice out there whatever the type of cart you want ..

@TXiCN

4 жыл бұрын

@@michelrichert9052 I was referring to the editing.

Best cart available, for the money. I've sold and installed about a dozen at my store, with zero complaints. I even use one on my store table.

This is great loads of knowledgeable people, I'm new to vinyl and I'm on my second turntable after going from a project rpm 1 Carbon(30yr old teac amp) to a rega p2 and brio amp with a pair of lovely old rega jura speakers and the sound comparison was a revalation. The rega has carbon cartridge and I'm now looking to upgrade my needle and this looks like a viable option and like a few other comments on here I'd rather spend money now on the records! Any help or advice would be much appreciated 🙏

As someone who runs or used to run a lot of conicals, I'm aware of their downsides, but many of them like the DL-103 or the Nagaoka MP-100 (aka. the poor man's DL) have their merits (low price and tolerant in adjustment, sometimes lesser groove noise). I'm surprised how well this cheapo fares (I never like the very plasticky sounding AT91 variants), and its enormous upgrade potential! Thank you for showcasing it in sophisticated environment!! 👍🏻

@KaiTimmerherm

4 жыл бұрын

@hifisquarepants I listened especially to Peg over and over again, and I really like how this humble cart is able to resolve the overtones of Donald Fagen's husky voice. For vinyl beginners the VM95 indeed is the ideal starter cart, as you can upgrade with your growing expectations 👌🏻

That's a great statement. That would be awesome if anytime in the future you tell your experience with various MC cartridges

I love this new AT series. Amazon in Canada had the VM95S (shibata version) with head shell on sale for $261 CAD. Not exactly your point here but I got a world class cartridge for half, third, or even a quarter of cartridges with the same performance. I also have an AT 3600 with a replacement elliptical stylus and it also sounds really good, probably $60 total. It makes you question all the other purchases ;)

How do you post videos spinning vinyl and not get blocked for copyright? I tried posting one today and got blocked immediately. I just put a new AT VM95EN on my turntable and wanted to show it off. Thanks.

I will admit, I was sceptical for a long time, spending a bit of money for something that can either change your perspective or give you regret. I don't have high end equipment by any sense of the term. I have a Technics Sl-D303 and a MCS 6700. Both of them have an Ortofon OM cart and I used the OM10 for a long time. My buddy told me I should upgrade to a micro line stylus but spending $300 or more just didn't seem justified. Until I found a OM30 for lest that $200 NOS. Why didnt I listen to my friend before? OMG! I love it so much and I didnt have to even change carts. Literally night and day. Now I found a second OM30 for a little over $200 dollars and it will be here next week. Now it is justified.

Yup, love this cart and the ability to swap out styli in an instant. Been debating getting a conical just for older records and 45s, but I'm wary of the dreaded IGD.

@user-lx1is2wl7i

11 ай бұрын

Getting rid of IGD will typically cost some serious money. My best experiences have been with vintage Shure and Audio Technica cartridges. These are not fussy with simple mounting to make them play well.

Does the mp500 cart have an equivalent of a microline/ridgeline/vividline on it right?

Hello from Brazil! 🇧🇷🇧🇷 Can you make a IGD comparison of the conic vs ML?

3 years ago , i bought a AT-LP120 turntable with the at-95E cartridge ..but.just because of the poor sound output of the turntable , it sound kinda flat and not so good ... and then , i swapped the cart on my Technics SL-220 and i heard all this cart was having to give .....Good bass and treble response !

As ever you get out what you put in... bad pressings or bad masterings cannot be cured (however some records can be flattened and deep cleaned for dramatic improvements). A well engineered cart certainly doesnt need to cost much and thats always been the case. I feel sorry for those who have to spend over 4 figures on just the cart alone to enjoy music 😂

Phenomenal but you also have a fantastic technics and a excellent pre-amp. Even with a cheap cartridge you will always have fantastic results.

@HiFisquarepants

4 жыл бұрын

Haha...that's very true :P

@MrAndreferrari

3 жыл бұрын

I wish I could send him some of my records to prove you wrong 😰

@MrAndreferrari

3 жыл бұрын

There are pressings that not even a microline will do the job

@urbanknish6965

3 жыл бұрын

Yep, that's easily 90% of it.

I say that the conical and elliptical needle for the VM series has an excellent cost benefit and has its merits of hearing. However, when you want to transcend what you have never experienced in terms of sound, the way is to take the other profiles. I am a new user of a microline VM, and for a long time I caught the price, but after listening to it, my concept changed completely

@alexanderpetrenko539

4 жыл бұрын

The recent microline stylus for the VM basically changed the way I listened to records, and by extension, how I listened to music. Highs became crystal clear, tracking was rock-solid, and the soundstage came into laser-sharp focus. I love the ML.

Dire Straits-- forever!!!

THX GR8 vid!!! I wanna add this cart to my collection. SOUNDS GFR*!!! GOD BLESS!!!

@jeffmora9763

3 жыл бұрын

Pop

My Ortofon 520mkii recently broke, very similar to the replacement 2m Blue I understand. Having watched several video's regarding the AT 3600l all very positive decided togive it a go and just upgraded the stylus to a Atn 91r. where I live it's slmost a tenth of the price. The listening experience really is very enjoyable, perhaps not quite the reverb and staging but I have very quickly settled into this new cartridge. Give it a try, you will be pleasantly surprised I am sure.

Ok, mine arrived today. It is a very nice one and it's fair even to most sibilant records I have. I'll definitely upgrade to the ml, but this gives me more time to save money.

@MrAndreferrari

3 жыл бұрын

Thank you square pants

awsom videos thank you. but usualy we deal with bad pressing from many reasons. so the better stylus shape help to collect more details with less sibilnance.

You had me at Peg!

Does this cartridge have to go on a specific tone arm? I have an s one

I have an old aud-technica cartridge at11e Can i get a new stylus without changing the cartridge?

Great video! Better than any AT advert ;o)

@HiFisquarepants

4 жыл бұрын

Haha, it could well be an advert, you're right! xD

HiFisquarepants thanks! When a person like you that has first hand experience of manny, manny different cartridges. Say something like this then it is something to take to your heart! Thanks! Keep up with the great work. 💖

@HiFisquarepants

3 жыл бұрын

That is VERY kind of you! Thank you. The C stylus does not meet my needs in terms of tracking, but I could live with the EN, ML or SH all my life. Of course, there's (always) room for improvement but, they're good enough to enjoy the music without any other worries :)

0:48 the 23x1 comparing looks like a comparison between the ortofon mc anna and that’s a 660€ cartridge

Good stylus, good turntable, good amp/ preamp and nice set of speakers don't have to cost an arm and a leg. This form of music isn't free from dickheads saying you need a 5000 needle to play back your honky tonk 45s. A lot of snake oil and no real reason to spend a years sallery on one stylus yet alone for a nice stereo. This channel is so amazing. Affordable equiptment. What do you need more?

Con los tocadiscos incluso con las patas y la base convenientemente amortiguados, al poner la aguja sobre el vinilo parado sin girar, y subiendo el volumen del amplificador, llega un momento que se oye un ZOOOOM (se acopla), y hay que bajar rápidamente el volumen. ¿Se puede evitar esto?

いつも素晴らしい動画をありがとうございます。　Thank you very much for your great job♪

@HiFisquarepants

4 жыл бұрын

それは私の喜びです、ありがとう:)

Fluteboy Nice reviews, Have you done a review on the VMN95EN?

Blow your mind !!!

Dang nice looking video. What was this shot with?

What record player are you using? This sounds fantastic.

Nice Video!

I just got this cartridge (with headshell), and I have one issue: the left channel acts as if it’s not getting a n y signal at all.

Your channel is just fantastic. I've gone back to vynil some time ago because I love them, however, much as I try and spent a lot of money upgrading turntables and cartridges I can't get rid of inner grioove distortion, which is driving me mad, really, to the point of reconsidering ever leaving my hobbie behind onve again. After seeing this one it seems that a good choice form me would be to upgrade my ATVM95e form my ATLP120xusb to a microline. What are your suggestions? I really need your advice because I am very disheartened by the whole thing about IGD which is really ruining my vynil experience. Thanks!

@HiFisquarepants

3 жыл бұрын

Thank you! 🙂 Don't give up on vinyl! Try the 95ML: kzread.info/dash/bejne/fJqgusRvaMioiLA.html

@urbanknish6965

3 жыл бұрын

If IGD really bothers you, make sure your cartridge is properly aligned. That solves 90% of it and you can get great performance from a VM95e. If you still aren't happy, save your pennies for the microline stylus. The tracking is unparalleled. The nude stylus version also tracks well. For my own tastes, i find microline to be a bit shrill and prefer the nude stylus (AT-VM95EN).

if you have the money, go for a moving coil cartridge.I regret bying the Ortofon 2m bronze. I've should have bought the Quintet bronze straight away,It sounds so mutch better.

Have an old Pioneer PL518 with shure VSTV cart. Hearing test show I can’t hear soft female voices so would I hear better audio with over $100 cart?

Wow this takes me back to 1980.

Nice informative video. How did you aquire the extra weight for your headshell?

@HiFisquarepants

4 жыл бұрын

Hi, thank you. It came with the headshell.

I have experimented with carts, but my biggest revelation is owning a pro ject record cleaning machine...admittedly bought for half price last year.

Love the sound quality in your vids. How are you getting the sound into the computer? An interface or a stand alone recorder? Thanks

@HiFisquarepants

3 жыл бұрын

Tascam DA-3000 :) Thanks! ;D

@pompeyjim

3 жыл бұрын

@@HiFisquarepants Nice one that was quick! Cheers I'll look into it as it sounds great

Can someone tell me what's the point on mounting an extra weight upon the heahshell? What are the benefits? I have one but I never mounted it...

@HiFisquarepants

3 жыл бұрын

I did it to increase a little bit the tonearm mass since this is a medium compliance stylus. I guess now it's a better match because the sound is more focused and solid 👌

Great video quality, sound is superb! Have you any experience with the at-vm95en. It’s the orange coloured stylus which is a nude elliptical will that reduce IGD more than the green vm95e which is bonded?

@junglejamesie

3 жыл бұрын

The nude and bonded elliptical stylii have exactly the same tip profile so, theoretically, they should deliver the same performance. In my experience, nude stylii last longer than bonded stylii.

@HiFisquarepants

3 жыл бұрын

Nude lasts longer and its sound is a bit clearer, plus stylus tip mass is lower=it tracks better.

Great sound but this is a great pressing as well. The AT95 ML is a better tracker and I would recommend it for metal.

I have the VM95ML and VM95SH which I run on my TD125 and SL-1210GR respectively and I can't really see spending any more on cartridges as these two do everything I need.

@farbruun

4 жыл бұрын

Which one do you prefer ? Planning 95SH on my Rega P2

The better stylus options for the VM95 make a big difference. I would personally skip this conical version and aim a little higher at least. I'm using the VM 95SH and it does perform well above it's price point.

@morenocasalegno3532

2 жыл бұрын

I have the sh as well and I'm so happy. Both sh and ml have a very good price considering the much higher durability vs conical and elliptical stylus.

Hi, great video, but FYI you are showing the AT VM95E in the video profile pic, when the video itself is about the VM95C! I've been using a Nagaoka MP-110 on my Pioneer PL-518 for the past three years, and I'm really thinking about going back to conicals -- the quality of the music here sounds just as good (or better) than my MP-110. I used conicals for like 20 years on my cheap plastic automatic turntables, then upgraded to the Pioneer and realized ellipticals were considered best. In my experience, they just bring out more IGD...and also their lifespan is much shorter. The MP-110 is rated for 250 hours by Nagaoka...and the VM95C is rated for 500 HOURS by Audio Technica! Twice the lifetime for a fraction of the cost.

Do you have a recommendation for a good pair of head shell wire leads?

@user-lx1is2wl7i

11 ай бұрын

Make sure they have golden ends.

Hola Francisco: En tu video anterior, *Muddy Waters-Country Boy* , hice mención de los "Tallados locos" como forma de referirme a esos cartuchos los cuales tienen esas Stylus mas sofisticadas, pero desfavorablemente cada tallado de esos hace que los costos se disparen en proyecciones geométricas y hasta exponenciales. :P Me puse a investigar lo que ofrece esta linea, y realmente es una alternativa a la serie Ortofon 2M y otras marcas incluida las propias AT, francamente me sorprende pero al mismo tiempo es algo que sospechaba de que los "Costos y Dificultad de producción" con las mejoras tecnológicas que ya tenemos en este siglo pues no deben ser tan altos. Es decir con esas maquinas programables pues no debe costar tanto fabricar esos "tallados locos". Viendo la linea que ofrece este cartuchos y sus Stylus, a un precio tan Inferior, pues podría ser la forma de que mas usuarios quienes vivimos en "tercermundolandia" podamos acceder a lo mejor de lo mejor, por apenas una fracción del precio que tienen las marcas tradicionales. En Amazon/USA, por tan solo US$200 de los verdes + gastos de envío ofrecen la Shibata con todo y cartucho. Eso es el 27% de lo que cuesta actualmente la 2M Black. La diferencia es que Ortofon garantiza 1000 Hrs, en cambio AT 800hrs. Cosiderando el Precio sigue siendo una ganga. Por otro lado las 2M son más bonita pero seria mejor escuchar que tan buena es esta linea AT en la zona de los IGD. Después de todo "los tallados locos" justifican sus precios, algunos escandalosos, porque pueden lidiar con la "Zona Temida". *¿Que opinarán de esto los "Guruses" del High End?* ¡Saladines!

@HiFisquarepants

4 жыл бұрын

Hola Raúl. Pues queda demostrado en vídeos anteriores que los tallados ML y SH de esta gama no tienen ningún problema de IGD. Diría que la ML incluso es superior a la 2m Bronze y Black. La ML es una maravilla en ese aspecto; es prácticamente imbatible. Otra cosa es el sonido de la cápsula. Suena muy distinto a la serie 2m... para un sonido más relajado y fiel, esta gama 95 es mejor. Si quieres un sonido con más caracter, la 2m es la opción a elegir. Es cuestión de gustos. Saladines 🙂

Mileage may very, diminishing returns, hearing loss, types of records. I find it important to have a cartridge and stylus that can deal well with IGD. I use a Micro line for digitizing. Conical and ellipticals can have their charm. A Jico SAS stylus can upgrade some older cartridges. The AT 95 is a solid upgradeable performer with the AT sound which I like, pretty good place to start. Some people prefer different sound signatures of other brands.

With really good pressings, my 2M red sounds amazing. But I get sibilance on inner tracks on some records that are not pressed as well. The VM540ML solves this issue and allows me to have good sound from lesser pressings. But the price difference is so steep - I agree it’s better to buy good pressings and to keep them clean.

@HiFisquarepants

2 жыл бұрын

The AT-VM95EN tracks much better than the 2m Red. Watch this video: kzread.info/dash/bejne/e6dnzauqkarWo7Q.html

What did you use to record this?

I have that AT-VM95C, what do you think about AT95E cartridge? Grettings from Honduras, Central America.

@RichardNixonsHippieRemoval

6 ай бұрын

Have it. It's supposedly easier on your albums. Only buy the AT-VMN95E stylus - do NOT buy it with the cartridge. The stylus will fit onto the cartridge you have with the VMN95C. Just remove the stylus (blue part) carefully, then carefully snap on the AT-VMN95E stylus. You'll know what to do. Just be careful and delicate with it. Greetings from Indiana, US.

Thanks for your honest video in the world of hifi myths and nonsense.

Hi. What mat are you using? Tried the AT3600 and AT95E. Also Nagaoka MP200. Now i use VM740ML. Very happy with it. Not too bright and microline stylus. It does cost 300€/$ though but worth every cent!!

@HiFisquarepants

4 жыл бұрын

Achromat 🙂 The 740ml is definitely much brighter than this model.

@DCDi34

4 жыл бұрын

@@HiFisquarepants maybe it is but it also has 27000Hz response compared tge 23000 on VM95. I used to have AT440MLb and it was waay too bright on high freqs. The 740 is just right. Very similar to the legendary 150MLX. Keep up the good work. I really enjoy your videos. 👍

¿Están las agujas MM por encima de las MC en calidad precio? La mayoría de tus videos son agujas MM

You are using headshell weight and I assume you have auxiliary weight on back on the tonearm too, otherwise it wouldn't balance. AT-VM95 would balance nicely without added weight too. I guess it has something to do with improved bass response, isn't it? Better tracking maybe? I'm using old AT95E on a Technics turntable and I put a 3 gram shim between cartridge and headshell and added an auxiliary counterweight to rebalance the arm. While I haven't noticed sonical improvement the tracking seems to be somewhat better indeed.

What video camera do you use? IS GREAT!

@HiFisquarepants

4 жыл бұрын

Hola ;) En vídeos más elaborados utilizo una DSLR Nikon con diferentes lentes y una handycam Sony. En este caso, como eran solo dos planos sencillos, he utilizado la Sony FDR-AX53.

@MAXIVINILElCanaldelVinilo

4 жыл бұрын

@@HiFisquarepants Gracias! Un abrazo.

I love the sound of this cartridge with this song ( Setting me Up). Can you do exactly the same video using the ELLIPTICAL version of the ATVM95C? Thanks, and Happy Holidays.

@ThresholdZhor

3 жыл бұрын

I'll bet the elliptical is a bit wider soundstage but same timbre maybe

@Locomotore99

3 жыл бұрын

@@ThresholdZhor I don't know; I never tried it. My concerns with elliptical needles is having to deal with Inner Groove Distortion ("IGD") that seems to be much more widespread that I imagined. I never experienced it since I stick to conical needles. I bought this cart and does not deliver IGD.

Maybe put the cartridge on one of the inner tracks instead of the outer ones. The Steely Dan Aja record has some really tough to deal with high frequency energy on Deacon Blues and Josie where cheap cartridges begin to sound... cheap. The closer you get to the center of the record the more apparent the differences will be. With that said, I also don't like investing large amounts of money on cartridges, and have settled on Nagaoka MP150 or MP200 stylus replacements (when I can afford it).

Aja is one of the very best recordings to be put onto vinyl. A dem & review classic. Also consider John Martyn's Grace & Danger featuring none other than Phil Collins!!

So which brings on to the next question, Phono stage or cart? As I believe that you are using a highly specced Phono Stage..

Audio Technica has hit a homerun with the VM95 series.

@mjthrillergn

3 жыл бұрын

I agree. I have the VM95EN and it sounds amazing!

One of the biggest problems that I have is that it’s impossible to do a side by side comparison, switching between both to hear any difference, so the hype that more expensive equals better quality is probably subjective

And off course captive threaded holes,excellent

In my experience there is nothing wrong with enjoying music with a cartridge that has a bonded conical stylus. I have a Technics P33 cartridge with a JICO SAS stylus and an Audio Technica 300p cartridge with a bonded conical stylus both of which I enjoy listening to my music just as equally. I agree that keeping records clean and looking after them is important. I think the adage "More isn't necessarily better " is true.

@NiiOnLood

7 ай бұрын

Conical is cool. Very forgiving and less fussy regarding alignment. And Shure M44G is a total rocker. Too clean and detailed sound can get boring.

I’ve just got a VM95E it’s very crisp and sharp though maybe a bit toppy for my ears, I prefer something a little more mellow. Great choice of music by the way. I’m interested in what the weight is on top of your cartridge in the video?

No other cartridge can't beat this price/performance, I have an old AT-125 and a AT-95E, I prefer the sound of the AT-125 but in this 35 dollar price this is a must for analog beginer on a budget, do not look for anything else.

1:38 this nude shibata has the same cantilever as the bonded elliptical one, maybe therefore it’s the cheapest shibata I’ve seen.

Imho the ML variant is the one with the best price/quality ratio,despite costing five times that of the C variant. Its not only a clearly better tracker that offers better resolution and clarity,but also wears way slower out.

My experience so far is, that each cartridge has its merits. It depends on the kind of music you are listening to, sometimes a specific cartridge for a specific track fits perfectly and you are overwhelmed. Sometimes you are less convinced. We have to make compromises. And I agree - an expensive cartridge does not necessarily mean to have a better sound quality - there are a lot of parameters to consider.

Both of those on a diffucult pressing or inner grooves may give poor results.

Well, finally it seems I'll have to go for the vm95c. And then upgrade to the microline stylus. Maybe not even upgrade, because of electrical issues causing humming and interference here... 😢 Almost giving up on my collection and best hobby.

@tomwebb7091

3 жыл бұрын

They dont often come cheap but your mains sounds unclean so a good conditioner or better still regenerator will sort it out! Some hifi is more sensitive to dirty mains than other. As a valve amp user i know well the effect of how bad mains contributes to annoying hums and buzz. Some products just dont do it at all, some are cured almost entirely by mains cleaning/regen.

How this one compares to the at vm540? I use a vm540ml

@utub1473

4 жыл бұрын

Well the VM95ML has the exact same stylus shape so they should both track pretty well. For obvious reasons the VM540ML should sound better given that it costs much more than these.

@HiFisquarepants

4 жыл бұрын

The 540 is much brighter and kinda EQed, which is not a bad thing if you lke the sound. This VM95 series sound much more neutral. It's a total different world.

What is IGD?

Me ha encantado el vídeo. Agradecería que algún día hicieras un vídeo con la cápsula groove tool de Numark. Esta tiene una separación de canales de 26db. Las AT baratas suelen andar por los 23db. La Numark es más resolutiva y abierta. Gracias por tus vídeos!! Saludos desde Barcelona.

@HiFisquarepants

4 жыл бұрын

Gracias Mauricio, yo también soy de Barcelona ;) Lamentablemente no tengo la cápsula que comentas...

@mauriciosanchez9639

4 жыл бұрын

Ostras! si estás aquí al lado 😊 Eres un crack montando vídeos. El de Blade Runner con la goldring es una obra de arte. Pués la Numark la tienes por 19 euros. Te aconsejo encarecidamente que la pruebes 😉

@HiFisquarepants

4 жыл бұрын

@@mauriciosanchez9639 Gracias, no descarto probarla 🙂 Gracias también por lo del vídeo de Blade Runner. Es gratificante comprobar que el trabajo es apreciado 😃👍

You definitely run into the law of diminishing returns as the price of the cart dramatically increases. That said, your AT VM-95 series punches way above its price point; AT offers what I believe to be the best bang for your buck. When I upgraded my Planar 3 with the VM540ML (from the Carbon), I noticed a lot more detail and much better tracking. Not to mention IGD was no longer an issue.

@Locomotore99

3 жыл бұрын

I have NEVER experienced IGD and have never used elliptical needles. This is a really nice cartridge.

I had to go to the ML to get rid of IGD/

AT-VM95ML vs AT-VM95c? opinions? does microline REALLY reduce IGD?

@alexanderpetrenko539

4 жыл бұрын

The Microline ML not only reduced [most] inner groove distortion for me, but it made all my other needles sound like crap in comparison. Suddenly I could hear EVERYTHING in the music, and by that, I mean very clear highs, effortless midrange, very laser-like presentation.

@IlMortadella

4 жыл бұрын

@@alexanderpetrenko539 yes you're right. i just wanted to hear opinions...anyways sometimes i like the classical conical more...a lotta distortion but sounds very analog to me.i even prefer it over ellyptical