CHEAP Hangkai 18hp problem again!

Пікірлер: 46

  • @sslcfc
    @sslcfc3 ай бұрын

    I got the 12hp, few hours, in a can. Got to get registration and the out on the lake. Your videos are a great help for future problems. So thanks!!!

  • @jroyablacksmith

    @jroyablacksmith

    2 ай бұрын

    How long are the shafts? I need a long shaft

  • @wessle3233
    @wessle32334 ай бұрын

    it's not that weird for any engine to get glogged in that spot when they aren't used for a while. Especially with salt water. Another fun video tho!

  • @cthunter9136
    @cthunter91363 ай бұрын

    Great videos you make thank you. How many hours on the engine now?

  • @chong7091

    @chong7091

    3 ай бұрын

    This engine is about 240hours now.

  • @a23b23

    @a23b23

    2 ай бұрын

    ​@@chong7091was it reliable?

  • @childofgod5115
    @childofgod51154 ай бұрын

    Great video! I’ve watched several of your videos on the Hankai I’m getting ready to buy one. Nice fish was that a amberjack? Happy resurrection day!

  • @chong7091

    @chong7091

    4 ай бұрын

    Its not an amberjack , its a GT. Today i caught 3 barracudas ,1 makarel, 1 GT. I had to cut short my fishing trip because my cold box is full😅

  • @caseytan6153

    @caseytan6153

    4 ай бұрын

    Wahh enjin sumbat masih dapat pecah tong, fruitful trip!

  • @chong7091

    @chong7091

    4 ай бұрын

    @@caseytan6153 haha, nasib baik sumbat dah clear

  • @TaufiqAideeTV
    @TaufiqAideeTVАй бұрын

    Rekomen tak boss engine hangkai ni? sparepart senang cari?

  • @chong7091

    @chong7091

    Ай бұрын

    Bagi pendapat saya lah, harga engine ni memang best untuk bajet saya, saya bukan guna engine ni setiap hari so saya tak pasti ia akan bertahan atau tidak kalau heavy use setiap hari. Setakat ini saya masih puas dengan engine ni , masalah masalah yang saya menhadapi semua ada dalam video video dalam yt saya😁

  • @derpyturtle2660
    @derpyturtle266023 күн бұрын

    I just got one of these motors. It’s a lot of fun but I have to constantly pump the primer bulb to not starve fuel. Any ideas or suggestions?

  • @chong7091

    @chong7091

    23 күн бұрын

    @@derpyturtle2660 you just need to squeeze the primer ball until tight at the initial start up, after the engine started, you dont have to squeeze the ball again otherwise the engine will stall/ overfuel

  • @chong7091

    @chong7091

    23 күн бұрын

    @@derpyturtle2660 if you need to contantly squeeze the ball after the engine has started (low fuel intake), you need to check whether any part of hose is banded and make sure the vent valve of the fuel tank is open and working properly.

  • @derpyturtle2660

    @derpyturtle2660

    23 күн бұрын

    @@chong7091 sweet, I’ll give that a go next weekend. Thanks for the quick response!!

  • @captainjayc9217

    @captainjayc9217

    4 күн бұрын

    May be you need to slightly open the vent of the fuel tank? If the fuel tank vent is closed tight, no air can get in to the fuel tank when fuel is extracted from the fuel tank, and this creates a pressure to prevent fuel from going out smoothly.

  • @chong7091

    @chong7091

    4 күн бұрын

    @@captainjayc9217 the problem is the water hole blocked by the bee/wasp "soil". I always store my outboard outside my house where there are alway bees/wasp make hives with soil, so the lesson learned is ... Cover the outboard top or store the outboard inside house .

  • @fishingbyom1372
    @fishingbyom13722 ай бұрын

    Hi! Is the engine good?

  • @chong7091

    @chong7091

    2 ай бұрын

    Engine 👍. For the bad problems, you can watch my other videos of hangkai in my chanel

  • @unknownsoldier30
    @unknownsoldier303 ай бұрын

    Hello boss,saya ada sedikit pertanyaan.saya ada beli enjin jenama hangkai juga tapi 6hp sahaja.saya ada dapat buku manual tapi buku itu bahasa china so saya tidak faham tentang arahan yang diberi.persoalan saya..enjin jenama hangkai bagaimana cara untuk break in period di rumah ya?saya cuba cari video tutorial break in period enjin jenama hangkai di youtube tapi tidak ada sesiapa yang membuat video cara untuk break in period enjin baru jenama hangkai.sudah 4 bulan enjin saya masih simpan dalam kotak kerana saya sampai sekarang tidak tahu cara untuk break in period untuk permulaan menghidupkan enjin baru.terima kasih boss jika sudi balas persoalan saya.

  • @chong7091

    @chong7091

    3 ай бұрын

    Selalunya ,untuk breakin period adalah 10jam guna. dalam 10jam pertama, ratio petrol: 2t adalah 25litre petrol campur 1 litre 2t. Lepas 10jam/lepas breakin 50litre petrol campur 1 litre 2t . Untuk 10jam pertama, full speed jangan lebih 10min. Bagi saya ,dalam masa 10jam pertama, saya ikut campuran petrol 25 liter dengan 1 litre 2t sahaja, yang lain saya tak ikut😁

  • @unknownsoldier30

    @unknownsoldier30

    3 ай бұрын

    @@chong7091 maksud 10 jam pertama Tu enjin itu Kita biarkan ia sentiasa hidup direct selama 10jam ke boss?

  • @chong7091

    @chong7091

    3 ай бұрын

    @@unknownsoldier30 bukan bro, kamu terus breakin di boat di laut atau sungai. Tak perlu breakin kasih start di rumah. Terus boleh guna. Campuran 2t dan petrol mesti 25liter petrol dengan 1 liter 2t (10jam pertama).

  • @mankazuha

    @mankazuha

    3 ай бұрын

    Tuan...engine 4 stroke perlukan break in juga ka

  • @unknownsoldier30

    @unknownsoldier30

    3 ай бұрын

    @@chong7091 kalau break in di Sungai/laut 10jam Kan?so masa Di Sungai itu enjin biarkan hidup Dan bawa slow-slow direct 10jam ke boss?saya kurang faham.atau contoh mula-mula Kita bawa Ronda Sungai 1 jam lepastu berhenti.lepastu Sambung Lagi hidupkan enjin Dan Ronda 1 jam lagi kemudian berhenti rehat.and then ulang sampai cukup 10jam.macam Tu ke boss?

  • @Neo-ll3ip
    @Neo-ll3ip2 ай бұрын

    Does this go into saltwater?

  • @chong7091

    @chong7091

    2 ай бұрын

    I only use this hangkai in saltwater. It never submerged into the water😁

  • @Neo-ll3ip

    @Neo-ll3ip

    2 ай бұрын

    @@chong7091 thank you!!

  • @astredmax551
    @astredmax5512 ай бұрын

    pancing dekat mana bos?

  • @chong7091

    @chong7091

    2 ай бұрын

    Pulau Satang kecil dan satang besar di kuching bro😁

  • @frydemwingz
    @frydemwingz3 ай бұрын

    I still will probably get a hangthang

  • @chong7091

    @chong7091

    3 ай бұрын

    Cheap engine, but good engine. Save some money for other things.

  • @mankazuha
    @mankazuha3 ай бұрын

    impeler dah keras la tu...sebab engine leh jalan...shaft rod dah hancurkan impeler

  • @chong7091

    @chong7091

    3 ай бұрын

    Tidak bro, impeller masih bagus, air kencing kuat lepas lubang kencing tu dibersihkan. Kalao impeller rosak pun saya tak risau, saya ada 2 biji baru punya spare😁

  • @mankazuha

    @mankazuha

    3 ай бұрын

    @@chong7091 terbaik boss..hehe...tulah ada sarang tebuan tanah ka buat sarang tu🤣🤣

  • @chong7091

    @chong7091

    3 ай бұрын

    @@mankazuha memang dia punya kerja😅

  • @brooks4048
    @brooks4048Ай бұрын

    Damn Junk compared to a Honda ,Evinrude or a Mercury.

  • @rodpatah2372
    @rodpatah23723 ай бұрын

    Ape masalah belaku bos

  • @chong7091

    @chong7091

    3 ай бұрын

    Haha, itu lubang air kencing tu tersumbat lepas enjin ni tak jalan 5-6 bulan

  • @TaufiqAideeTV

    @TaufiqAideeTV

    Ай бұрын

    Rekomen tak boss engine hangkai ni? sparepart senang cari?

  • @chong7091

    @chong7091

    Ай бұрын

    @@TaufiqAideeTV Bagi pendapat saya lah, harga engine ni memang best untuk bajet saya, saya bukan guna engine ni setiap hari so saya tak pasti ia akan bertahan atau tidak kalau heavy use setiap hari. Setakat ini saya masih puas dengan engine ni , masalah masalah yang saya menhadapi semua ada dalam video video dalam yt saya😁