Available from affiliate links: Amazon Local: amzn.to/3qeMgES Ebay UK: ebay.us/ctvwZ6 Ebay US: ebay.us/AieXUZ Ebay CA: ebay.us/77GsQe Ebay AUS: ebay.us/pnVz71

This fan splitter is the best i've used by far. Ended up buying 4 for me and my friends.

@mikesunboxing

2 жыл бұрын

it is really handy and can keep cable clutter to a minimum

Have this installed on my pc for a long while. Has worked flawlessly. Well worth the money.

@mikesunboxing

2 жыл бұрын

yeah i love these, very handy

recently got one of these, works great, really small, fits behind the "rear" lid real easily, and has its own adequate sticky strip to attach to the case.

Thanks for the review. I like that your content is so relevant and helpful to me. I've got a second PC that has 1x CPU fan + 3x case fans yet only 2 fan headers (one which has the CPU fan connected to it), I've used a fan splitter but I can only connect 2 of the fans to it... this is a much better solution. Cheers Mike!

@mikesunboxing

2 жыл бұрын

Glad I could help! and thanks for the kind words

I just ordered one of these bad boys thanks to your thorough review!

@mikesunboxing

Жыл бұрын

Hope you enjoy it!

Great bit of kit that is cheap, handy and does what it says on the tin. Thanks for sharing Mike and Kath :-)

@mikesunboxing

2 жыл бұрын

this is a great little gadget and makes life so much easier for some cable management and adding extra fans

quite informative, i was looking which splitter to use between this and the 10 and you answered all my questions.

@mikesunboxing

Жыл бұрын

glad to hear it, thanks for watching

I appreciate your preferred fan settings breakdown. Thanks, very helpful.

@mikesunboxing

10 ай бұрын

No problem!

This was an excellent video, thanks so much, the full walkthrough was perfect and helped alot.

@mikesunboxing

Жыл бұрын

You're very welcome!

Useful. Been using something like this for years. 👍

@mikesunboxing

2 жыл бұрын

check the temps and see if it is running okay

Thank you for sharing! This actually helped me a lot

@mikesunboxing

Жыл бұрын

You're so welcome!

Leant a lot from you videos to help with my 1st new build. 👍👍

@mikesunboxing

5 ай бұрын

Glad I could help

This was quite helpful, Ty so much♥

Very nice suggestion! Great set up at the end...kudos!

@mikesunboxing

Жыл бұрын

Glad you enjoyed it

Hi! Thank you very much for the instruction. Now it is absolutely clear for me that exactly this one device I need.

@mikesunboxing

Ай бұрын

Glad it was helpful!

Nice cheap box to address a problem with fan headers on MBs. Great video thanks Mike.

@mikesunboxing

2 жыл бұрын

You bet

No fingers were harmed in the making of this video. Thnak you very much, Mike and Kath!

@mikesunboxing

2 жыл бұрын

very true!

Nice peice of kit cheers for the review mike 👍

@mikesunboxing

2 жыл бұрын

No problem 👍

This is the exactly what i need, my motherboard only has a 1 classis/pump and wanted to add in 3 fans to my motherboard. Was also half price so its perfect timing.

@mikesunboxing

Жыл бұрын

awesome!

Thank you for the review. i was looking for a way to control the PWM fans on my brother new PC (Gigabyte b450 MB, only 1 fan header for the case) and this is just perfect.

@mikesunboxing

Жыл бұрын

No problem 👍

@tomi6637

Жыл бұрын

@@mikesunboxing Can I connect 4 fans to a b450m s2h that only has a 1 header

Thank you Mike !

@mikesunboxing

2 жыл бұрын

cheers James

Going for deep cool fh 10…thnks for the vid…i want to power the hub via psu :)

I recall following yur recommendation for an Arctic fan hub to build dters pc late 2020. These are a great idea for basic mbs👍Btw did the sound drop part way thru? Thanks for sharing Mike and Kath👍

@mikesunboxing

2 жыл бұрын

Good stuff! and yes it did, another one slipped through, it is being trimmed out in the background 👍

Awesome content!

@mikesunboxing

Жыл бұрын

Glad you enjoyed it

Hello. I had a question. What other software can you use to control your fans through this hub or the fh10 hub? I noticed you used msi center, are there others that you can use to set your curves and such? Thank you

@mikesunboxing

2 жыл бұрын

all the motherboard manufacturers have a similar app like ai suite 3 for asus and gigabyte has SiV

nice fan splitter cheers

@mikesunboxing

2 жыл бұрын

Thanks for watching, Craig

Sorry for my ignorance, but i have this motherboard: gigabyte b450m ds3h v2, where i need to connect this hub? and also, can i use 3 pin fans in it?

@mikesunboxing

3 ай бұрын

connect it to a chassis fan header, and set the header in the BIOS to DC control for using 3 pin fans

Hey i have a question, does bad cable managment in the back make your temps rise higher, and if so, will it affect lifespan of your components?

@mikesunboxing

2 жыл бұрын

only if it is blocking the airflow a lot

What happens when you plug in both 4-pin and 3-pin fans on this hub? I have two 4-pin fans, and two 3-pin stock case fans but only one system fan header on my mobo. Was wondering if this hub could fit my use case.

@mikesunboxing

Жыл бұрын

the 3 pin fans will spin either very slowly or full speed when used with other 4 pin fans

Hi, Mike. This looks like a nice fan hub. However, I still prefer cutting the cables and splicing them together in sets of three fans in parallel.

@mikesunboxing

2 жыл бұрын

Good point! and cheaper

Hi with DC intake fans what control temperature reference should be used the CPU, GPU or Vrams ?

@mikesunboxing

2 жыл бұрын

that is down to you, i would probably use the CPU temp myself

The A520 motherboard springs to mind 😅

@mikesunboxing

2 жыл бұрын

yeah or the a320m-a i have here

Dear Mike! I bought a PC case which has two 3-pin sys fans and also have a 4-pin fan. I am a bit confused, can i connect these fans into this hub? I only have one 4-pin chase fan header in my motherboard. If true, then should i plug 4-pin fan into the 1st port right? Thanks in advance for your reply! :)

@mikesunboxing

Жыл бұрын

You can do the 3 pin or the 4 but technically not both at the same time if you set the header to voltage and connect the 3 pin fan into the first socket that might work

The only concern I would have is loading up 4 fans on 1 motherboard header, I mean is it no different then having a 4 head splitter cable that connects to 1 MB header? Unless this hub supplies the power to the fans then that would rock! However its pretty cool you can control 3 pin (DC) fans within your BIOS instead of the fans running at full power and without the ability to control the speed.

@mikesunboxing

Жыл бұрын

four fans is a bit on the edge for some older motherboards, three is very comfortable

Hello,i have a question. I am using thr prime h510M-E motherboard so just wondering if i can connect the deepcool deepcool fk120 fan to the CHA_FAN(SYS_FAN) or i will connect it to the CPU fan using a fan splitter?

@mikesunboxing

8 ай бұрын

connect fans to the CHA_fAN header and use the splitter on that header if needed

@Ok-vh7qf

7 ай бұрын

@@mikesunboxingis it okay to connect it to the cpu fan header ?

Hi,i want to buy a argb fan hub,can i plug all the 6 fans in it? Because people on the internet say it wil catch on fire or something and idk what to do

@mikesunboxing

6 ай бұрын

the airgoo one we reviewed will do that easily and won't catch fire

Hello, I wanted to ask a question... I wanted to connect this hub to my motherboard and connect 3 fans to it. The rated voltage of each fan is 12v and the 4-pin connector on my mother gives 12v.. Would it be ok to connect all 3 fans? Or would it cause the motherboard connector to overheat? Cheers!

@mikesunboxing

Жыл бұрын

it is the AMPs that count the voltage isn't as much a concern here. Most modern fan headers will output a minimum of 1A so check your fans maximum AMP rating and times it by the number of fans

Great vid. How about showing "how-to" add ARGB fan set up to a motherboard that only has RGB connectors? And if you can, show how to control with software rather than a remote control.

@badhusband1902

2 жыл бұрын

cooler master has argb controllers with usb 2.0 connector and are software controlled

@mjbskydigital

2 жыл бұрын

@@badhusband1902 Cheers. Lets see if Mike decides to show novices like me :)

@philblack6477

2 жыл бұрын

The Razer Chroma is pretty good at controlling the ARGB, 6 three pin ports for ARGB, ( coolermaster only has 4, we have both) power for the fans need sourcing elsewhere though. Individual LED control meaning you can get great subtle effects. The sofware is a bit task manager heavy but not too bad.Well worth checking out and currently 25% off at Amazon.

@mikesunboxing

2 жыл бұрын

there is no point in adding a ARGB fan or converting it to RGB as the entire benefit of ARGB is completely lost on the conversion.

I’m confused right now. So idk if my motherboards headers will support the wattage of this I was thinking of getting 5 arctic f12 PMW which need a wattage of 2.4 W and idk if that’s too much for the 4 pin fan header for the ASUS Prime B660M-A Wifi D4

@mikesunboxing

Жыл бұрын

this will only take 4 fans but i would suggest 3 to be on the safe side, maybe get a powered hub if you are unsure

my mobo has only one 4 pin case fan header with pwm controll . if I use this and plug two pwm fans into it. are they both gona be pwm controlled or is one gona run at full sped? thank you!

@mikesunboxing

Жыл бұрын

they will be both running the same PWM speeds

does the deepcool fan hub controsl the rpm automatically or need to set manual ?

@mikesunboxing

Жыл бұрын

it repeats the rpm signal that the hub is plugged into to every port

Great video, Mike. One question: when plugging in 3 pin fans to 4 pin headers, which pins do you miss? The one at the beginning or the end

@avendji

2 жыл бұрын

It's keyed, so you gonna miss the last pin a.k.a the pin that control the speed in pwm mode.

@mikesunboxing

2 жыл бұрын

yes as posted key have a plastic lug or guide so they can't be easily but in wrong

@OlettaLiano

2 жыл бұрын

On a 3-pin connector pin-1 is the ground, pin-2 is 12VDC, and pin-3 controls the speed. On a 4-pin connector pin-1 is the ground, pin-2 is 12VDC, pin-3 is a sensor, and pin-4 is the speed control. So on a 3-pin connector pin-3 acts as both the sensor and speed controller, to the best of my knowledge.

@avendji

2 жыл бұрын

@@OlettaLiano quite there but 3rd pin is always a speed sensor on both 4-pin pwm and 3-pin vdc connection. Difference is 3-pin control the speed by lowering the amount of voltage going into the fan, usually ranging from 9v - 12v. While 4pin pwm controling the speed by basically turning on and off the 12v rail very fast to get the speed it targets, but it still 12v nonetheless, that's why 3-pin fan when set into 4-pin pwm mode always gl full speed because to them its just 12v without any regulator to turn on or off

Is this compatible somehow with say.. a thermaltake RGB controller? I am trying to make this stupid build of mine work and while I can control the light with my TT controller, PWM doesn't work. (well, works for 3 of my 9 fans as I can only put one pwm cable, the other spot is taken by my aio pump)

@mikesunboxing

Жыл бұрын

This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels

bro can I connect 3 Rgb fans and 1 normal in the hub and then plug it in the sys fan on the motherboard?

@mikesunboxing

Жыл бұрын

yes that is fine, but remember this is a replicator, so the ports all give out the same signal regardless of the fans plugged in, so try and use similarly speced fans

Does the HUB get powered by the SATA l shaped cable? Might be a dumb question but I know very little about pcs and trying to learn

@mikesunboxing

9 ай бұрын

no this hub is self powered by the motherboard

@LegallyBlind21

9 ай бұрын

@@mikesunboxing Thank you Just subbed for your great help

@mikesunboxing

9 ай бұрын

Awesome! Welcome to the Channel 🙂 @@LegallyBlind21

My English is not good, but one question : this spliter work in mother 980de3/u3s3 2.0 rev ?

@mikesunboxing

2 жыл бұрын

yes it will Hernan

When we use there fan hubs, can we still control fan curve via BIOS? Just wanted to be double sure ty

@mikesunboxing

9 ай бұрын

yes but the fans connected will all be using the same curve

Hello, I was thinking of buying the asrock B450M Pro4-F R2.0 and CASE GAMER HALION FURY ATX 550W, but the page does not show the voltage or amperage of the fans, it has 4 and since the mother only has 2 to connect, I think, I wanted to buy that hub. know if the hub will give me problems to motherboard or not

@mikesunboxing

Жыл бұрын

should be fine, it you are concerned get the arctic powered PWM fan hub assuming the case fans are PWM not VDC

@Drsimi-ty3iy

Жыл бұрын

@@mikesunboxing So this will turn the fans and I won't have any problems, right?

Is it safe to connect three fans at 0.37 amps peak to a 1A fan header?

@mikesunboxing

10 ай бұрын

Should be okay if you have no other option

Can this work with any motherboard? I have the Asus PRIME B660M-A AC D4 motherboard and CORSAIR - LL Series 120mm Case Cooling Fan Kit

@mikesunboxing

Жыл бұрын

should be fine

can the Asus prime b450m-a hold 4 arctic p12 PWM pst co fans in that one fan hub ?

@mikesunboxing

Жыл бұрын

yes should be fine

@mer1boss_883

Жыл бұрын

@@mikesunboxing do you know how many amps or volts the deepcool fh 04 takes ?

Con una placa madre que soporta 1A puedo conectat ventiladores que consumen 0,2? Hay riesgo de que haya sobrecarga??

@mikesunboxing

Жыл бұрын

Puedes conectar 4 o 5 de ellos a ese amperaje.

if i got 6 fans can i plug 2 fans into motherboard and the rest 4 into the hub?

@mikesunboxing

7 ай бұрын

that should be okay 3 or 4 is normally okay

Hi, i have a question, can i connect 2 of those fan hub together and connect 8fans the 1hub will be connected on my Mboard sys fan??

@lorielmartinez3941

Жыл бұрын

Will it work?

@mikesunboxing

Жыл бұрын

no that would be too much load on the header, i would use 3 / 4 fans on any motherboard header

I have a question I have four 4 pin fans with each 1 four pin and a 3 pin can I use this device plugging in 4 pins to the hub and the extension 4 pin power to my motherboard header RGB?

@mikesunboxing

Жыл бұрын

if it is a 4 pin PWM plug yes, but the RGB or ARGB is nothing to do with this hub at all, that needs to be done separately

@Pyracantic

Жыл бұрын

@@mikesunboxing sweet I'll report back what happens:D you're the best!

Is it possible to use different brand fans on this like cooler master slick flow 120s? Planning on using them in the ssupd meshlicous

@mikesunboxing

Жыл бұрын

yes that should be fine

@GOATMAN-vr7bo

Жыл бұрын

@@mikesunboxing thank you man you really are amazing for still replying to this comment on an old video you just earned a subscriber the video was in-depth and it helped me appreciate it

@mikesunboxing

Жыл бұрын

@@GOATMAN-vr7bo Awesome! Welcome to the Channel 🙂

audio dropped at 5 mins 22 seconds not sure if its my pc or your video

@kev2427

2 жыл бұрын

Same for me

@Cqex

2 жыл бұрын

Video

@mikesunboxing

2 жыл бұрын

yes this is an ongoing problem for some videos, i will trim it out, lucky i was just rambling anyway so not a crucial bit of info

In my motherboard I have 2 types of fan headers cpu fan header and cha fan header and I don’t know where to plug the to

@mikesunboxing

7 ай бұрын

If it is case fans then cha fan

I have the asrock B650 HDV/M.2 motherboard, where would I plug in this device on my motherboard?

@mikesunboxing

7 ай бұрын

chassis fan header

@alexedison1029

7 ай бұрын

Awesome thank you for the help! 😊

I love PC fans like I love RGB ligths!! More Fans is more better!! And more fans are just more cool! Literally!!! Lol.

@mikesunboxing

2 жыл бұрын

yes more fans are needed in life, maybe a few in the network cupboard to keep all your gear cool

Could you please explain what is 1st slot for? What if i connect 3 same pwm fans into 2, 3, 4 slots, leaving 1st slot empty?

@mikesunboxing

Жыл бұрын

the first port is for fan speed sensing

@Pavel105

Жыл бұрын

@@mikesunboxing so it's mandatory to connect at least one of the same fans to this port?

Nice! The screwdrivers in the back are more worth than the the motherboard !

i bought nzxt h5 flow elite i have 2 rgbs fans and 2 non-rgb nzxt fans all of them are 3 pins can i control my fans speed with this deepcool controller i want all of my fans to run at %50 idle and %100 at rendering

@mikesunboxing

Жыл бұрын

if they are all 3 pins yes

@fakelife.

Жыл бұрын

@@mikesunboxing they are all 3 pins so if i connect all of them to deepcool controller can i use all of them at %50 speed with dc controlling and thank you for your answer

hola no tuviste problema con alimentar 5 fan en el splitter?

@mikesunboxing

2 жыл бұрын

probablemente sean demasiados fanáticos para un solo encabezado, especialmente si giran rápido.

I have a B760M-P, i already installed 4 fans and already plugged them in to the fan hub except for the side panel ran which i will plug on the second slot, would there be a problem if the 3 other fans are plugged onto the fan hub?

@mikesunboxing

7 ай бұрын

sorry i don't quite understand the question

@Nonebit

7 ай бұрын

@@mikesunboxing Pardon me, i was writing this on mobile so it's understandable if it's sorta gibberish. Will 2 120mm and one 80mm fans overload the fan hub?

@mikesunboxing

7 ай бұрын

@@Nonebit no that is fine

@Nonebit

6 ай бұрын

@@mikesunboxing Good to know, thank you.

I have a 1 amp port and i need to put 4 12 volt fans in the hub will it work

@mikesunboxing

Жыл бұрын

that might be pushing it when they are all at full load

@henrischmidt7786

Жыл бұрын

@@mikesunboxing thanks for the help i was already getting worried it will not work. And they will not be under full load

can i buy 2 of those hubs, and plug them into fan header 1 and 2 on motherboard and then plug my 3 fans into 1 hub and my rest 3 into the other hub??????????????????????

@mikesunboxing

7 ай бұрын

yes you can

Deepcool sc-790 if u can do a video on this would be great.

@mikesunboxing

4 ай бұрын

i'll see what i can do

@brentonj.gilbert504

4 ай бұрын

Thanks

@brentonj.gilbert504

4 ай бұрын

Just an FYI when I hook it all up I got the 90b code on start up so I put everything back to stock. My mb only has a cpu fan header and s system fan header for the rear exhaust fan.

i don’t know almost anything about pcs but my motherboard has no fan headers and i could only get it to turn on but there’s no rgb. so if i get a fan hub would i be able to get rgb?

@mikesunboxing

7 ай бұрын

no, and your motherboard should have at least one fan header, what model is it?

@user-vy9jb5cm6l

7 ай бұрын

@@mikesunboxing i meant rgb header

@mikesunboxing

7 ай бұрын

@@user-vy9jb5cm6l kzread.info/dash/bejne/omaumpiufbDOj6g.html try this

I bought this hub to connect 4 arctic p12 pwm in my fan header, unfortunately when I set it to PWM mode, the RPM going full. Not sure what causes this problem lol.

@mikesunboxing

Жыл бұрын

yeah that is odd if the header is set to PWM in the bios, maybe a loose connection on port 1

@dayveeee07

Жыл бұрын

@@mikesunboxing Already fixed it, instead of daisy chaining my 3 intake fans, I plugged them individually. To my surprise it works lol.

@mikesunboxing

Жыл бұрын

@@dayveeee07 Glad you got it all working 🙂

Right now, adding more fans would mean getting bigger case for me 😁

@mikesunboxing

2 жыл бұрын

seems like a good excuse to me

@patricklebel1141

2 жыл бұрын

@@mikesunboxing just like wireless screwdriver, I have to let some time pass before having a new case in home 🙁

I bought the ID Cooling FH-07 not knowing there's a difference between fans and my fan uses 3 pins while the FH-07 uses 4.. I'm sad

@mikesunboxing

4 ай бұрын

try it, it might be okay as long as you set the motherboard fan port to DC

do corsair fans plug into and work on this?

@mikesunboxing

2 жыл бұрын

only the ones with 4 pin pwm plugs on

Здравствуйте. К какому разъёму подключать данный разветвитель. CPU Fun подойдёт для этого?

@mikesunboxing

3 ай бұрын

connect it to the header you want the fans to respond to. CPU or Chassis fan header, either is okay

Hi can i connect the hub to 3 pin fan ?

@mikesunboxing

5 ай бұрын

you can but it will need the main header it is plugged into to be set to DC mode rather than PWM and any other fans connected to the hum will also need to be 3 pin DC

does this allow you to control the rgb of the fans?

@mikesunboxing

6 ай бұрын

no, fan speed only

@alexjvv7053

6 ай бұрын

@mikesunboxing ok thanks, i decided to go with daisy chain fans, so I can connect all three to my argb head on my motherboard, thanks anyway though :)

Can i use this with Molex Pin Fans ?

@mikesunboxing

4 ай бұрын

no sorry

Can this hub control 3pin fan speed?

@mikesunboxing

Жыл бұрын

yes it they are all 3 pin

can you use this on a AIO cooler

@mikesunboxing

10 ай бұрын

i would use it for the 2 or 3 fans, but not the pump as well, keep that separate

Hey does it work with rgb fans

@mikesunboxing

Жыл бұрын

it does work with any 3pin VDC or 4 pin PWM fans but the RGB will need to be controlled with a controller, this will still control or power the fans

Worthy of Support comment 🙂

@WilliamAndrewPhilipBodie

2 жыл бұрын

Ps: @05:14 to @05:28 there is no sound 😞

@mikesunboxing

2 жыл бұрын

Yeah there was an Adobe rendering error, the video is being updated in the background so it should remove that segment shortly

@WilliamAndrewPhilipBodie

2 жыл бұрын

@@mikesunboxing It's not a problem for me. just wanted you to know. other than that great video info & find 🙂

@mikesunboxing

2 жыл бұрын

@@WilliamAndrewPhilipBodie Thanks :-)

Will it be ok to plug in the graphics card fans into a fan hub ?

@mikesunboxing

Жыл бұрын

if they use 4 pin PWM connections it should be okay, but the GPU sensor or temp sensor probably won't be able to regulate them

@PallBEARer730

Жыл бұрын

@@mikesunboxing ok I’m trying to figure out the best way to add more fans but I have no open ports on my motherboard what you suggest?

@mikesunboxing

Жыл бұрын

@@PallBEARer730 This is maybe easier to advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels

can it be connected to a 3 pin chassis fan on motherboard

@mikesunboxing

11 ай бұрын

yes but then will only work with 3 pins fans as there will be no PWM signal

@bornavelic6292

11 ай бұрын

@@mikesunboxing THANK YOU

I guess a fan hub does not control individual fan speeds. I want each fan controled thru fan profile with Fan Control.

@mikesunboxing

Жыл бұрын

you need to plug a single fan into a single header to do that

so it means that i cannot use my 3 and 4 pin fan at the same time?

@mikesunboxing

Жыл бұрын

that is correct. use 3 pin OR 4 pin not both types at the same time

Thanks for this, Recently did a self build, Noticed The provided fans from case were woefully insufficient and Motherboard had insufficient connections for fans aswell. No rear exhaust for heat all 3 fans were put at front by manufactorer majority of my heat is being taken by PSU Right now have turned it upside down so the heat gets sucked and pushed out.

so i see how this fan hub uses a 4 pin to connect to your motherboard. However my motherboard only has 3 pin fan headers. How do i do this? Can i do this?

@mikesunboxing

Жыл бұрын

yes but the fans need to be 3 pin also

@amaze3109

Жыл бұрын

@@mikesunboxing i did some digging into my mobo and turns out it got multiple 4 pin fan headers. I looked in the manual and it said it only had 2 3 pin. Weird how the manual is wrong. I ordered 2 of these hubs and will be using them with 6 4 pin fans :)

Hi support aerocool shark fan 140mm 3pin 12volts?

@mikesunboxing

2 жыл бұрын

yes it will

@riezalyncacapit1502

2 жыл бұрын

Thank you idol❤️

can i control the PWM speed in bios for all fans (3 pin)?

@mikesunboxing

2 жыл бұрын

You can select dc voltage control to use 3 pin fans which works in a very similar way

I purchased some aigos, for my o11 12 in total, 2 different hubs, and one fan, in the same location continues to stop working

@mikesunboxing

2 жыл бұрын

that is odd. both hubs do the same thing or is there a bad port

@HardHeadMilitary

2 жыл бұрын

@@mikesunboxing i am going to tear apart again and see this weekend. Im tempted to pay more for better quality fans, plus i have drilled the rear locstion for a single 120mm, and the mesh front panel for 3 more fans on the way. So i need it dialed in.

@mikesunboxing

2 жыл бұрын

@@HardHeadMilitary Good luck, and feel free to join our Discord chat and we can go over it in more detail discord.gg/gaeeDPw

@HardHeadMilitary

2 жыл бұрын

@@mikesunboxing mike, I will definitely join the discord, your channel offers alot of information. I do have a question, and I will search for myself, have you reviewed the asiahorse one piece fan set 240 and 360mm fans with rgb and one cable to hook up? I would like to do them since they are only $40, and the unifan by lian li is like 110

The problem is with this with fans that pull to much current. It could blow the MB fan controller, it was designed to power 1 simple fan, not 4 fans, even more if the fans are power hungry.

@mikesunboxing

7 ай бұрын

most modern headers are designed for 2A so that isn't an issue now

@rodrigofilho1996

7 ай бұрын

@@mikesunboxing tell that to my 10k rpm delta fan...

Is it reliable and the pwm works ?

@mikesunboxing

Жыл бұрын

yes to both, excellent little device

@S.D1010

Жыл бұрын

@@mikesunboxing thanks. will buy them tomorrow for my brother's pc paired with deepcool fans..

If the fan hub don’t have power plug from psu don’t buy it it’s just A splitter the max of 1 fan header is 2 fans only more than that He is gonna damage ur motherboard with time

@mikesunboxing

Жыл бұрын

if the header has enough amps it is fine

Mm so the fan's can not be individually speed adjusted.....

@mikesunboxing

2 жыл бұрын

no, it just replicates the signal to multiple fans

Can you connect cpu fan to it

@mikesunboxing

Жыл бұрын

if you want to you can

@Alt-tx9lo

Жыл бұрын

@@mikesunboxing Thx for reply Can I connect this hub to cpu fan socket? I have only 3 pin fan header so was thinking to connect this to cpu fan as it have 4 pin and connect other fans to it.. is it possible?

between £15-£17 now to get one

@mikesunboxing

8 ай бұрын

wow that is awful, look for other sellers

Lol so where do the rgb plugs go

@mikesunboxing

2 жыл бұрын

you need another hub for that

@cael_1303

2 жыл бұрын

@@mikesunboxing I had this question. so in the case that I don't have an argb hub (preparing to hook up the splitter), would daisy-chaining the rgb cables from say fan1 to fan2 to fan3 to fan4 work to get the rgb synced? I literally hadn't thought of it until the kit came today. Or would it be better to get a hub for that as well?

Available from affiliate links: Amazon Local: amzn.to/3qeMgES Ebay UK: ebay.us/ctvwZ6 Ebay US: ebay.us/AieXUZ Ebay CA: ebay.us/77GsQe Ebay AUS: ebay.us/pnVz71