CHEAP DIGITAL GAUGES FOR YOUR LS SWAP OR ANY NEWER MODEL SWAP WITH AN OBD2
Автокөліктер мен көлік құралдары
Made this quick video to show you guys how you can have cool digital gauges for cheap!
Like stated in the video, this "should" work for any newer model swap that has an obd2 port.
If you have any questions comment down below.
FOLLOW ME-
Facebook- Krusty Classics Garage
Instagram- KrustyCuda
TikTok- KrustyCuda
Пікірлер: 42
Man I just found your videos. I like how you show how to do smaller budget LS swaps. Btw I’m a fan of the LS swapped Cuda.
I swapped a 8.1 in my 84 and was looking to get some temp gauges in her. Thank you sir for the info I'm heading over to amazon now 🤘🏽 I want oil psi and water temp
LS engine in la are $ 25 on up to 4 G
Good bless you
Link for obd chip ?
I hear the corvette ECO OS reads oil pressure. Don't know if that's true. I believe that's the 12587603 OS (P59), so anything running that should be able to be setup for it.
Nice it read everything but oil pressure
Does the VSS need to be connected via the harness to read vehicle speed?
@krustyclassicsgarage
Ай бұрын
Yes but if the ecu isn't set up for your rear gear it won't read correctly
@Fahrenheit_Motorsports
Ай бұрын
@@krustyclassicsgarage oh dang. That I’m not sure of. I don’t think that was something they asked me when they programmed the ECU to cancel vats. To be honest I couldn’t find the connector on the harness. I looked at both the drivers and passengers side harness all the way back to the rear o2 sensors and I didn’t find anything I could plug into the 4l60e VSS. Do you recall which side of the harness I would find it?
@krustyclassicsgarage
Ай бұрын
@Fahrenheit_Motorsports ya. You typically have to send them a message and ask them to program it in. I never do though. The plug is loomed with the big circular main harness plug that plugs into the side of the transmission
does the tablet and or bluetooth thing need wifi or just the tablet or neither
@khg_7
9 ай бұрын
Tell me if you know I'm asking the same thing
@MOE13576
7 ай бұрын
I know
Would that suction cup fit on the oe gauge face? Thats what im thinking of doing with mine.
@krustyclassicsgarage
10 ай бұрын
I tried it. It wouldn't stick to the plastic cover over the factory gauge.
@Bennyboysspeedshop
10 ай бұрын
@@krustyclassicsgarage dang. I'm gonna think of something. I'll let you know what I find.
Is there a way to get oil pressure to read on there through the pcm?
@macdaddy887
3 ай бұрын
11.00 min in
Where the heck are you getting the voltage gauge from. I cant find it in any of the lists.
How do I download the trans temp gauge to users pids
@krustyclassicsgarage
7 ай бұрын
Go to user defined pids, and it should give you a "GM" option. Click on it and scroll down.
So every time you start the car you have to click through all that just to see the gauges?
@krustyclassicsgarage
Жыл бұрын
You just hit connect, then hit dashboard and the gauges pop up.
@Trikekid84
Жыл бұрын
@@krustyclassicsgarage that's not bad, way cheaper than the Holley! Love that Camaro wrap and the vega wagon!
@krustyclassicsgarage
Жыл бұрын
@@Trikekid84 Thanks. Just posted the first part of the swap on that vega wagon. I don't like it as much anymore now... lol
@mun33y
Жыл бұрын
What are you using now?
So does it read the gas level?
@krustyclassicsgarage
9 ай бұрын
No
My wifes tablet my come up missing now
Hey i have a question how are you reading trans temp
@macdaddy887
3 ай бұрын
Where does the ecm get the temp signal from
@krustyclassicsgarage
3 ай бұрын
@@macdaddy887 the computer
Lol shit I commented to early back to manual gauges lol. When u were goin through the download options it said engine oil pressure does that not work?
@krustyclassicsgarage
3 ай бұрын
No as no swap harness has an oil pressure sensor plug as the ecu doesn't need it or use it
@knoxbros
3 ай бұрын
@@krustyclassicsgarage do u have a video of hooking up your oil psi? Or can point me to where I would run sensor.
@krustyclassicsgarage
3 ай бұрын
@@knoxbros I run a mechanical gauge to the spot where the factory oil sending unit goes. You just need an adapter which you can get on Amazon then hook up the gauge just like you would on an old school engine
@knoxbros
3 ай бұрын
@krustyclassicsgarage thank you so much. I'm not sure why, but I was all confused. lol, I know what I'll be doing this weekend. I'm ready to burn some fuel and do some miles. Thank u again. I just subscribe to your channel. If I do a small video of the installation, Im going to give u a shout-out 🤘🏽
Where you located and do you take on other work? :)
@RustyZipper
Жыл бұрын
Temple, TX , yes, check the description for contact info
LS in a Mopar, just doesn't seem right....lol
@RustyZipper
Жыл бұрын
MoPar or NoCar built like a Rock!