Going back and re-watching some of your old videos. Only four years ago-I miss these days in the old shop where it all started.

@MortskeRepair

12 күн бұрын

Thanks for watching

I like the composure of Duff Dog not even flinching after hearing the grinder...nice! And is that Wonderwall playing in the background Nice touch...

@timgibson2070

3 ай бұрын

Did you watch the same video I did? He got up and left.

Real world! Appreciate a video showing how 99% of us diyers will do it. If we wanted it perfect we’d take it to a shop... or if we had the money! Thank you!

@MortskeRepair

3 жыл бұрын

Glad it was helpful!

Hey Mortskie, u have SOOO much knowledge about classic cars & trucks!! I hope to be on that level when I grow up! I love ur videos & ur hard work. Even though it ain't work if ur doing what u love! So keep it up! Much love from THA NOLA!!!

@MortskeRepair

3 жыл бұрын

Thanks much for watching and for the kind words!

That dog was like "gd I was comfortable... fuck this I'm out of here" lol

Going back through all the DEEP CUTS. Rock on, Morstske.

@MortskeRepair

3 жыл бұрын

Vintage films!

Great video man! One thing I can suggest to interested people is wear a mask or respirator though. When I did the drivers floor and rocker / cab corner on my 88 I actually got a lung infection about halfway through from the constant grinding and welding. Just my 2 cents. Keep up the good work everyone keep these great trucks going!

@MortskeRepair

Жыл бұрын

Thanks for the tip

@wildestcowboy2668

Жыл бұрын

Yankee's are not very smart. Hopefully the south doesn't decide to fire round 2 on those bloody clown's...

@alexp362

Жыл бұрын

@@wildestcowboy2668 round 2? You fools are too stupid to pull anything like that off. Us "yankees" kicked red neck ass once already and will do it again.

Hey. It was interesting how you make the corner of the car. You do a Good job. I like the video.

@MortskeRepair

3 жыл бұрын

Thanks for watching and for the kind words!

Looks like pretty good work. need to do the same on my old 96 ext cab corners and rockers.

You sure would make one Cool shop Teacher Mortske !

@MortskeRepair

2 жыл бұрын

Haha, editing makes me look tolerable and moderately intelligent!

Back at beercase garage we had a wde assortment of state license plates to pick from . Not so on the pop rivets.

I make a sweet set of rockers out of rain gutters n windshield urethane there's about 6 of them trucks I've done and they will never rot. I love doing used cars.

O contrer mon frère..... watching someone else doing metal work is magnifique ! Your work is exelemon !

@MortskeRepair

2 жыл бұрын

Thank you so much 😀

easy on the weekend work, and another great DIY job.

Good choice of music

Never seen you without your Hat LOL

Keep up the great work man fantastic

@MortskeRepair

4 жыл бұрын

Thanks for watching!

It looks very good. Nothing perfect bit it's a cheap car. And it looks fantastic. G ood job

@MortskeRepair

3 жыл бұрын

Quick and easy! Good way to learn and practice as well. Thanks for watching!

You have the same "natural" hard hat i have ! We're just fashion plates . LOL

Sweet job on the welding bud 🇬🇧✊🏻

@MortskeRepair

3 жыл бұрын

I do what I can!

sweet job! I've got one to do in the next few months

@MortskeRepair

3 жыл бұрын

Good luck!

Regular ole Chip Foose right there!

@MortskeRepair

3 жыл бұрын

Bahaha rattle cans and filler!

What a hack. Subscribed!

@MortskeRepair

4 жыл бұрын

Thanks for watching!!

That's pretty neat lol

Look good to me from Lancaster California

Good enough for the girls we go with.

@MortskeRepair

2 жыл бұрын

Damn straight!

Thank you.

@MortskeRepair

2 жыл бұрын

Our pleasure!

The amount of rust dust I have ingested inhaled or impaled over the years has left permanently magnetic!

@grantjohnston5817

3 жыл бұрын

has left me etc

nice work !

Here on the east coast that's a very common problem Where can I get a $500 pickup in that kinda shape ? Certainly not around here . A couldn't afford to have one shipped because that would exceed to the cost of the truck . Who am I kidding I couldn't even buy a $500 truck :(

Was this to just watch you replace a cab corner or to show how to replace a cab corner? Suggestion bring the camera closer to the work.

@MortskeRepair

3 жыл бұрын

I was trying to show how to install the cab corner. This was an early video I did. I've learned a few editing and shooting tricks since then! Thank you for the feedback Daniel!

Not bad morski first time ever saw you with your head off where the hell is great but you can't do it too much you will shock people when you take your head off ask me how I know.

@billscruggs5170

3 жыл бұрын

LOL replace head with hat

You a funny ass dude 🤣

@MortskeRepair

3 жыл бұрын

Thanks Kevin!

Where did you get them cab corners for $15

@MortskeRepair

3 жыл бұрын

I found them on the eBay!! Thanks for watching!

Damn! Mortske alittle bare on top are we?

I didn't recognize u without a hat and those sunglasses.

Should have cut it below the body line. It better to leave as much original metal as possible. Only cut out what's infected

@MortskeRepair

3 жыл бұрын

I'm not much of a body guy. Good point.

what did you have the welder set too temp and feed wise?

@MortskeRepair

3 жыл бұрын

I use a Miller 140 and have the wire speed at about 55 and the amperage at about the 3.5 setting. It will vary from welder to welder.

Nice video. Thanks! Why did you remove all the paint on the old corner before cutting it off?

@MortskeRepair

Жыл бұрын

To find good material

@maxwellsilver3115

Жыл бұрын

@@MortskeRepair OIC, thanks

Hola , sabes si se consigue la parte continua que es como estribo

How did you get the box off? did Fido help? I wish you'd show that part first.

@MortskeRepair

2 жыл бұрын

I had some help

Are cab corners and rocker panels all one piece?

@MortskeRepair

3 жыл бұрын

No, they're separate from the factory and replacements as well.

@FineTouchLLC

3 жыл бұрын

@@MortskeRepair thank you

Where did you buy the cab corner from?

@MortskeRepair

3 жыл бұрын

I bought the cheapest one I could find on eBay.

where you get corners what was part num,ber

@MortskeRepair

Жыл бұрын

eBay

The shops charge a lot to do that

@MortskeRepair

3 жыл бұрын

And it's not hard to do!

@MortskeRepair

3 жыл бұрын

@@HandymanHustle Make sure you seam seal it or rust will come back through.

@MortskeRepair

3 жыл бұрын

@@HandymanHustle Correct, you'll get moisture between the two pieces of metal if not properly sealed up.

@MortskeRepair

3 жыл бұрын

@@HandymanHustle wow, yeah, seam sealer is much easier to work with and designed for this application

How would you go about lining the bed lines up with the cab? My truck has the same thing going on.

@MortskeRepair

3 жыл бұрын

I'd replace the mounts and go from there. If need be I'd add shims to level it out.

Good video. Think you could make a video of a mid 2000's dodge ram front outer U joint and hub? It would sure be interesting to see that done.

@MortskeRepair

4 жыл бұрын

Hello Jake, I'd love to make something like that. Unfortunately my Dodge never breaks down!

Hi what time of welderare your using

@MortskeRepair

2 жыл бұрын

Miller 140

Where did ya get the cab corner

@MortskeRepair

3 жыл бұрын

Ebay!

The “$15 cab corner” you used When you film this video is now more like $40…Let’s go Brandon!

@MortskeRepair

2 жыл бұрын

Tough times

@timgibson2070

3 ай бұрын

It's called finding a good deal.... don't buy the first 3 you see bud. Lol

Need to have the camera in closer showing close up of what your doing, otherwise video is useless!!

@MortskeRepair

4 ай бұрын

Kind of like you

@RicheySynthetics

4 ай бұрын

@@MortskeRepair well, useful enough for you to reply to! Happy to help.

Not very instructive.

@MortskeRepair

2 жыл бұрын

We'll try harder next time.