Chasing NKP 765 In Northeast Ohio Part 3: Trouble On The Connection (A Greasy Situation)

Ойын-сауық

READ DESCRIPTION BEFORE COMMENTING!!!
"LIKE" US ON FACEBOOK!! WRRRA1997?ref=hl
765 steam train playlist • NKP 765 In NE Ohio! (S...
Previous video • Chasing NKP 765 In Nor...
The next video • Chasing NKP 765 In Nor...
Filmed July 2015
Nickel Plate Road no. 765 is a 2-8-4 "Berkshire" type steam locomotive built for the Nickel Plate Road in 1944 by the Lima Locomotive Works in Lima, Ohio. Classified as a "S-2" class Berkshire, the locomotive operated fast, heavy freight and passenger trains until retirement in 1958. It's also similar to Pere Marquette 1225.
Last run June 14, 1958
Retired May 4, 1963
Restored September 1, 1979
In 2013, 765 was officially included in Norfolk Southern's 21st Century Steam program, an effort to engage the general public and celebrate the railroad's heritage through steam locomotive operations. Plans saw the 21st Century Steam to visit many of Norfolk Southern's major terminals between 2013-2015. On the weekend of July 25-26, the Berkshire hauled excursions from Youngstown, Ohio to Ashtabula, Ohio.
The Video:
NKP 765 is running a ferry move (empty train to the next place) and is moving east from the Lake Erie District onto the Youngstown connection, turning south onto the Youngstown line in Ashtabula Ohio. The train was going from Cleveland Ohio to Youngstown, Ohio. The train was mostly empty but still have some weight to drag. Besides the tender, there is an Auxiliary (water) tender for more water on the go, which was full, and had several loaded gons of coal for 765. The coal goes with 765 on ferry moves due to issues with ordering coal on the go. Along with the loaded aux tender and several coal cars, 765 is pulling 20 some passenger cars along as well.
Going around the Connection (and stalls)
765 with its rather heavy, lengthy train, 765 still needs to turn over 2 switches, and follow the sharp curve onto the connection and head south up a 1.24% grade all at once. All these curves, can be too sharp could build a bind. 765 would be working harder rounding the curve but a plan was made. Grease the flange ways to make less of a bind/ resistance on the wheels. A simple fix, to ease something through in any bind.
What went wrong?
When requested to grease the rails, the railroad maintainers did just that. The railroad maintainers greased the inside edge of the rails where the flange ways would roll over. The issue arise after the train comes to a complete stop. After realizing what happened, the railroad maintainer applied too much grease for the drive wheels. When the wheels rolled over grease, since there was too much, it smeared to the top of the rail, causing the locomotive to lose grip and spin to a slow stop.
Was It necessary to grease the rails?
Yes. The steam locomotive has a rigid frame and is not as flexible as a diesel locomotive. The 4 big drive wheels are rigid and hunts for the rails as it goes down the tracks. Its a lot like bumper cars bumping into a wall. Greasing the rail would ease adhesion around the sharp curve.
Did the sanders work? Does the locomotive carry sand? Why wasn't the engineer applying it?
Yes, and yes! The engineer was applying it. This is one of the last few steam locomotives to be built, and has some of the most modern technology, especially after being rebuilt for excursion service. The sand was applied, as soon as the engineer realized he had wheel slip happening, but the greased outweighed the sand for the traction. The train came to a stop eventually.
Was the engineer aware of the situation/greased rails?
Yes and no. I am sure the engineer knew the connection (curve) was greased, but not overdone like what actually happened. It was a dry sunny summer day. So to have slippage like what was in the video coming out of nowhere would throw you off if you are in the hot seat driving the train.
The ended result:
Yes the train stopped. 765 backed up, and the crew men dumps cups of sand on top of the grease to get the traction again and made a second attempt to go around the curve, and succeeded.
Again remember- The locomotive was pulling a lengthy heavy train, switching tracks, then switched onto a tight curve (connection track) and climb a hill at 1.24% grade all while it was over greased. There was a lot of adhesion, and resistance against the locomotive. The grease would help but "too much of a good thing is bad for you" and that is exactly what happened.

Пікірлер: 1 500

  • @Mabeylater293
    @Mabeylater293 Жыл бұрын

    Even though this isn’t the richest neighborhood, you can tell that they take pride in their homes, their yards and keeping the streets clear from trash and litter. 👍👍👍👍👍👍. Nice job Ohio!!!!

  • @alishalama3650

    @alishalama3650

    5 ай бұрын

    animatated🚦🎶 melt dsnowunk nwn arist unknown album🚂🛤

  • @bernieshort6311
    @bernieshort63112 жыл бұрын

    What a beautiful piece of living history, I hope we continue to preserve these lovely machines. Talk about Beauty and the beast - This train has both, beauty and is a beast. I love the smell of graphite, oil and steam all mingled into one. I was fortunate to join the British Merchant Navy as an Engineer whilst they still had steam ships with main engine being a steam turbine and most of the auxiliary equipment being reciprocating steam engines. Thanks for this video, its pure magic in motion.

  • @toyotanerd2269

    @toyotanerd2269

    Жыл бұрын

    How long ago was that if you don't mind me asking ?

  • @bernieshort6311

    @bernieshort6311

    Жыл бұрын

    @@toyotanerd2269 I joined the Brirish Merchant navy in 1973.

  • @byronpink9061
    @byronpink90612 жыл бұрын

    The actual encounter of a functional steam engine is something that is etched in the mind for life. I saw a steamer in 1975 in Tacoma Park MD. They are loud with an array of pressurized sounds. love it!!

  • @zeenatrangrez848

    @zeenatrangrez848

    11 ай бұрын

    Igyuyyy

  • @majorsinghgill4725
    @majorsinghgill47253 жыл бұрын

    When tired I watch the aweful power and beauty of steam engines...marvellous....Salute to crew who handle this huge & complex machine

  • @mlweaver338
    @mlweaver3385 жыл бұрын

    I was a brakeman on the N.K.P railroad in Bellevue Ohio in 1953 , I road this steam engine many times , my what a power machine it was , it would pull a 100 loaded freight car 70 to 80 miles per hour , we run from Bellevue Ohio to Fort Wayne Indiana, After all these years I still like to watch the train go by ,

  • @PainesvilleRailfans

    @PainesvilleRailfans

    5 жыл бұрын

    ml weaver thats awesome! Thanks for watching!

  • @x1101126
    @x11011264 жыл бұрын

    It's huge, loud, and beautiful, every time I saw it's kind, I can feel energy. Love it.

  • @joeeveryman2208
    @joeeveryman22084 жыл бұрын

    It gives the impression that if it did hook up it has the torque to move the world back slightly as it started to roll.

  • @darioinfini
    @darioinfini4 жыл бұрын

    What an audacious concept. We're going to build a water tight container out of iron and steel and rivet it all together. Then heat it to hundreds of pounds per square inch. And put it on wheels and roll it down a track at high speed. And it WON'T blow up! Awesome. Beautiful machine. Thumbs up to its caretakers and great respect to its designers and builders. You guys were giants.

  • @6709ify

    @6709ify

    Жыл бұрын

    Well, that’s why steam locomotives have pop off valves, like that loud hissing thing going off at 1:11. When there’s too much steam pressure in the engine, that valve releases the excess steam. Hence, why more modern steamers don’t have a problem with blowing up as much as the earlier models. That pop off valve is super important when talking about steam pressure safety.

  • @darioinfini

    @darioinfini

    Жыл бұрын

    @@6709ify I guess it's the concept of sealing pressure with metal on metal interfaces. We do this all the time -- airplanes, locomotives, spacecraft, etc -- but I still don't fully understand how. I asked a guy who worked at Boeing one time -- you send a plane into the sky whose metal skin is riveted together. You do it multiple times and the plane's body flexes as it flies. HOW do you keep it hermetically sealed? He says well we use special glues... and I cut him off. SPECIAL GLUES?! You GLUE the plane together??? He didn't bother finishing what he was going to say LOL. But yeah I love looking at huge steam engines and wondering about it. I get that they have safety valves but that's a lot of rockin and rollin down the track at 200 psi.

  • @6709ify

    @6709ify

    Жыл бұрын

    @@darioinfini It’s funny you mention that because ever since I was a kid, I was always fascinated by vehicles in general. Cars, trucks, buses, trains, helicopters, airplanes, boats, semis, anything made out of metal and can move under its own power. Trains, to me, are particularly fascinating because of their sheer size & weight. And the fact that these 2 skinny steel rails can hold this gigantic vehicle up with no problem! Trains are huge! Especially steam engines! They weigh thousands of tons and are essentially the size of an office building. An office building that can move! And these few-inch wide rails can support all that unbelievable weight?! So, like you, I think about this stuff a lot as well. It’s mind-blowing, to say the least. BTW, that glue bit was hilarious. I cracked up reading that! 🤣

  • @darioinfini

    @darioinfini

    Жыл бұрын

    @@6709ify I've had exactly the same thought about the rails. The Big Boy literally weighs one million pounds. ONE MILLION. I think I did read that the engineers had basically reached the limit of the rails to support the weight. They could have gone bigger but normal rails wouldn't be able to handle it. Another thing that fascinates me endlessly is that the Big Boy has the articulating front truck that hinges independently from the rest of the carriage to be able to go around curves. So when I was looking at this thing and thinking about it I realized that the steam pipe from the boiler to the pistons HAD to have some kind of flexible interface somewhere carrying steam. I found it in a a pair of rotating elbow joints. It blows my mind that engineers were able to design a rotatable elbow joint capable of holding 200 psi steam pressure in the 1940s. Again, a metal on metal rotating interface mind you good for 200 psi. This is rocket science before rocket science.

  • @6709ify

    @6709ify

    Жыл бұрын

    @@darioinfini And as huge & monstrous as the Big Boy is, there are other steam locomotives in the world that would rival it in size, weight & pulling power. The Norfolk & Western Y6b, Chesapeake & Ohio Allegheny and Great Northern R-2 are just a few other articulated steam engines that gave the Big Boy a run for its money. Some of those locomotives were several tons heavier than the Big Boy and pulled even longer & heavier trains than it could! Think about that for a second. Back when the steam era was in full swing, Union Pacific Big Boy had rivals among it that were heavier and even stronger. 😮

  • @eagleeye1542
    @eagleeye15422 жыл бұрын

    I've never seen a steam locomotive in person. I've always wanted to, just there isn't any in this area. Sometime in the late eighties driving through the mountains in Tennessee I heard one once. It's quite an eerie sound when it echoes in the mountains and on the ridges. Thanks for the video.

  • @williamsporing1500

    @williamsporing1500

    2 жыл бұрын

    My grandpa was an engineer. He retired in ‘72 from the B&O. I got to ride in one a few times. Great memories….

  • @fredwood1490

    @fredwood1490

    2 жыл бұрын

    I used to hear the engines in the next valley over, late at night, as they passed Cotton Hill Station. I don't think they were steam locos but it was in the late 1950s. At any rate, I could hear that whistle blow as it went passed that dead station and it seemed like the loneliest sound in the world.

  • @Kevin-gw6us

    @Kevin-gw6us

    Ай бұрын

    You really should, living in England you are never that far from a steam engine ( not as big as this beauty though). So make the journey and help keep your heritage alive, you won't regret it.

  • @yourdiytechlife
    @yourdiytechlife4 жыл бұрын

    I thought these had sand systems to dump sand to the wheels when needed rather than manually doing it. That was a cool engine, nicely restored.

  • @PABackyardRevivals

    @PABackyardRevivals

    4 жыл бұрын

    Yes nickel plate road 765 and the others in the Berkshires in the class do have Sanders equipped by the wheels but the oil was to much for the engines Sanders

  • @LDaniel_BDuce

    @LDaniel_BDuce

    4 жыл бұрын

    dws productions-BlueYt And the train has to already be moving for the sanders on them to be effective

  • @daniel17319

    @daniel17319

    2 жыл бұрын

    How DARE you

  • @veronicafarina2554

    @veronicafarina2554

    2 жыл бұрын

    @@daniel17319 d

  • @sydneypalenge5982

    @sydneypalenge5982

    2 жыл бұрын

    Its called a sander

  • @40ounce58
    @40ounce582 жыл бұрын

    I love watching these old engines when they’re really moving down the tracks!

  • @truegret7778
    @truegret7778 Жыл бұрын

    Beautiful, beautify art, technology, power, ingenuity, design. I expected to hear the engineer jump off and say "alright everyone, get out and push on the count 3 ...". Thanks for sharing .... !

  • @fireteamalpha3754
    @fireteamalpha37543 жыл бұрын

    “Please drive slowly We our chlidren” Excuse me, what?

  • @solaireofastora1785

    @solaireofastora1785

    3 жыл бұрын

    @Cynical Demon Sad :/

  • @yugalupasani4126

    @yugalupasani4126

    3 жыл бұрын

    Love is missing.

  • @ShadowXII

    @ShadowXII

    3 жыл бұрын

    'EAT' fell off.

  • @Frankie_Fish

    @Frankie_Fish

    3 жыл бұрын

    Sweet home Alabama. The family tree is a circle, they're their own children..

  • @norbert.kiszka

    @norbert.kiszka

    2 жыл бұрын

    On first I read that sign as: "please drive slowly on our children". Macabra.

  • @Nubfist
    @Nubfist3 жыл бұрын

    That’s some impressive wheelslip. Imagine being in a car waiting for the train to go.

  • @realpillboxer

    @realpillboxer

    3 жыл бұрын

    Imagine being the guy that puts in a blurry 15 second clip to show one guy on a motorcycle crossing safely at hundreds of feet away.

  • @antonfloor344

    @antonfloor344

    2 жыл бұрын

    Then he or she is the luckiest person on earth

  • @hunnywilliams1794

    @hunnywilliams1794

    2 жыл бұрын

    I would never mind to see this masterpiece, especially in car

  • @SANTRIDAOfficial93

    @SANTRIDAOfficial93

    Жыл бұрын

    TIARA ][ COVER SANTRI DA👇 kzread.info/dron/vPdjzoCK0-sgo83A2m0lFA.html

  • @djaftermath4313
    @djaftermath43132 жыл бұрын

    @ 1:16-1:130, it looks like the train is trying to "burn rubber" with that slippage. I think that looks so damn cool the way all those levers, beams, and what not, are moving to make the wheels turn. It will never never get old to me. I know these aren't the most environmental friendly but they are damn cool looking....that's for sure!!

  • @arnoldberk7686
    @arnoldberk76862 жыл бұрын

    Someone has to switch on the traction control. Lionel had Magna Traction that worked . All kidding aside it’s very rewarding to see that people put time and effort into these beautiful giants. It’s just fun listening to the chuffing and watching the drivers moving.

  • @OutOfWards
    @OutOfWards2 жыл бұрын

    The art, the metal, the sounds, the sights. I would pay just to watch these come and go.

  • @garycox1274
    @garycox12743 жыл бұрын

    I would not mind at all if I got stuck in traffic to see something like that that's a one in a lifetime opportunity

  • @rajveersinghkohli2245

    @rajveersinghkohli2245

    2 жыл бұрын

    It's beautiful 😍😍😍😍

  • @williamsporing1500

    @williamsporing1500

    2 жыл бұрын

    My grandfather was an engineer for the B&O. I got to ride in one, run the throttle, helped the fireman throw coal and blow the whistle. When I was 12 or so, I rode in a diesel electric from Cincinnati to Lima and back a couple of times. I miss my grandpa. He was a great man.

  • @aksa3227

    @aksa3227

    2 жыл бұрын

    hard to skip watching it

  • @joeb3668

    @joeb3668

    2 жыл бұрын

    Gotta love em

  • @joeb3668

    @joeb3668

    2 жыл бұрын

    I was and loved every minute of it .

  • @VickyRenee
    @VickyRenee3 жыл бұрын

    That's always SO cool when you watch the arms on the wheels turn and turn so fast until it finally kicks in. I know it's wheel slip and it's not good for this to happen at all, I just like watching it when it does

  • @arogyappamudbal1839

    @arogyappamudbal1839

    3 жыл бұрын

    Hi

  • @gurmukhsinghgurmukhsingh7759

    @gurmukhsinghgurmukhsingh7759

    Жыл бұрын

    @@arogyappamudbal1839 🚜

  • @nigelterry9299
    @nigelterry92995 жыл бұрын

    I keep rewatching this one, it fascinates me. The driver certainly knows his stuff, this would have been only too easy for the slip to become uncontrolled and destroy the locomotive. Interesting to actually see the sanders in operation. Great video and well done to the guy on the throttle!!!

  • @randomrazr

    @randomrazr

    4 жыл бұрын

    is this a problem for modern deisels?

  • @Kycilak

    @Kycilak

    3 жыл бұрын

    @@randomrazr Modern diesel would not require grease in the first place so not really.

  • @randomrazr

    @randomrazr

    3 жыл бұрын

    @@Kycilak sand i ment

  • @jameskelly6152

    @jameskelly6152

    2 жыл бұрын

    Proper term is "engineer".

  • @dennisnevins2774

    @dennisnevins2774

    2 жыл бұрын

    The 765 crew is and always has been a class act.

  • @tmtubeusa
    @tmtubeusa5 жыл бұрын

    This was a great video - thanks for sharing. It was funny how even the cop took out his phone and started taking pictures (6:32)

  • @daniel17319

    @daniel17319

    2 жыл бұрын

    Fuck the police

  • @0bsidianPrime
    @0bsidianPrime3 жыл бұрын

    I'm a simple man. I see choo-choo, I click.

  • @klauskneifel6845

    @klauskneifel6845

    3 жыл бұрын

    Nnnnn jbm8 U..

  • @Visroker

    @Visroker

    3 жыл бұрын

    Jep

  • @brudno1333
    @brudno13336 жыл бұрын

    This reminds me of my home town (eastern Washington) where there was a grade coming and going and the usual route was from north to south. Every year or two some of the fun loving local guys would grease the rails on the outbound side of town to the consternation of the evening train crew. Laying in bed at night you could hear the engine hit the greased section and spin to a stop, whistle a couple of times and then back all the way to the down slope on the northern side of town, get a good run at the greased section and nearly make it through. Failing, it would repeat the process until it finally made it all the way past the greased section, by which time the entire town was awake. What fun.

  • @bill605able

    @bill605able

    5 жыл бұрын

    That's just awesome, good times!

  • @diegoperez3082

    @diegoperez3082

    5 жыл бұрын

    Wish I could do the same!!!

  • @BenjaminEsposti

    @BenjaminEsposti

    5 жыл бұрын

    Not cool...

  • @treasurehunter3944

    @treasurehunter3944

    5 жыл бұрын

    Yikes

  • @USCG.Brennan

    @USCG.Brennan

    5 жыл бұрын

    I used to live in Eastern Washington.....just curious where your prank took place. We used to put pennies on the tracks and retrieve them later all flattened out, but that's all.

  • @tommyschulte2577
    @tommyschulte25773 жыл бұрын

    Id love to see a few of these a year pulling. Especially in the winter. 20 below zero. Steam just rolling down the tracks. Cool.

  • @CaptainJustice166
    @CaptainJustice1668 жыл бұрын

    Sweet footage man!

  • @nedmerrill5705
    @nedmerrill57053 жыл бұрын

    Man, those Berks are beautiful locomotives!

  • @dergenmusic2081
    @dergenmusic20814 жыл бұрын

    Meanwhile, Tom Hanks the conductor is yelling “GET US THE BLAZES OUT OF HERE!!”

  • @andersjensen4469
    @andersjensen44695 жыл бұрын

    Amazing what a difference a bit of sand does ...

  • @richfiles
    @richfiles5 жыл бұрын

    8:02 "I'm helping! ROW! ROW!" XD

  • @aznmozez2214

    @aznmozez2214

    3 жыл бұрын

    XD.

  • @drapas7467

    @drapas7467

    3 жыл бұрын

    Lol

  • @euclideszoto997
    @euclideszoto9975 жыл бұрын

    The beauty of steam locomotives. All the glory and struggles today just like the Era then. That's why people love steam.

  • @dickJohnsonpeter

    @dickJohnsonpeter

    3 жыл бұрын

    Mostly because of pants.

  • @sadelsor

    @sadelsor

    3 жыл бұрын

    They are beautiful until the foreman gives you the job card with "Valve Job" written on it, that will knock the smile off you face, especially if its on the night shift 3 days before Christmas on the GWR, done it, not very pleasant !!

  • @euclideszoto997

    @euclideszoto997

    3 жыл бұрын

    @@sadelsor The stories are as amazing as the steam locomotives themselves.

  • @johndavey72
    @johndavey724 жыл бұрын

    Wow! That was hard work.You would think that the massive weight of the loco' would itself prevent wheelspin. I guess the sand boxes had run out.The front drive wheel appeared to have lost a fair amount of grease Hope all was well. These trains are an extremely important part of American history and heritage, ( and all over the world) We certainly hold them close to are hearts in Great Britain. Thank you

  • @dickJohnsonpeter

    @dickJohnsonpeter

    3 жыл бұрын

    I saw a video with James May explaining why trains have a lot of trouble with a grade of only 2% and can't really go up anything steeper than that. He said that the surface area of the wheels of a locomotive that's actually touching the tracks is only the size of two 50p coins.

  • @renegadeoflife87

    @renegadeoflife87

    Жыл бұрын

    In this video, the train had just run through a nearby flange greaser. Passing freight had splattered grease all over the rails, getting it on the steamer's drive wheels too. Normally it doesn't slip anywhere near this much. Eventually the crew's efforts in manual sanding and wiping away the grease allowed the engine to work through the tight curve and be on its way.

  • @billsmusic4944
    @billsmusic49444 жыл бұрын

    I could watch that train all day. What a beauty.

  • @craigpennington1251
    @craigpennington12514 жыл бұрын

    Trains need sand at the drive wheels for tracktion. That is what they are putting on the rails. Either the sand boxes ran out or they malfunctioned. Those steam locomotives are super powerful.

  • @LDaniel_BDuce

    @LDaniel_BDuce

    4 жыл бұрын

    They did use sand. The sand being dispersed was too little amout

  • @craigpennington1251

    @craigpennington1251

    4 жыл бұрын

    @@LDaniel_BDuce Understandable.

  • @Wirel2049
    @Wirel20494 жыл бұрын

    When I was in college in Russia (Biysk Altay), I rode in a tram in winter to classes, it was -45 degrees Celsius (-49 Fahrenheit) on the street. The wheels of the tram were spinning, but he stood motionless.

  • @Wirel2049

    @Wirel2049

    4 жыл бұрын

    I hate Putin and his russian mafia.

  • @DylansHobbies
    @DylansHobbiesАй бұрын

    I think they were applying too much power. You can see that when they put a little bit of power it did start moving, but when they put a lot of power, it just kept spinning. This is a really cool train. ❤

  • @markcarey8426
    @markcarey84266 жыл бұрын

    Excellent video and explanation. Thanks for posting it up.

  • @coloradongguy
    @coloradongguy5 жыл бұрын

    *SPEED AND POWER SOLVES MANY THINGS!*

  • @JasperTheJackal

    @JasperTheJackal

    4 жыл бұрын

    Not without traction bud.

  • @danbytp

    @danbytp

    4 жыл бұрын

    Ah,yes, the Tim"the Tool Man" principle!

  • @taygeta1221
    @taygeta12214 жыл бұрын

    Nada más hermoso y romántico que una locomotora a vapor

  • @mauriceupton1474
    @mauriceupton14745 жыл бұрын

    These old engines are living monsters from the past.

  • @HenryEpps-jd9dp
    @HenryEpps-jd9dp4 ай бұрын

    Hey guys... Hey you yes you lovely people that I'll never meet I just wanted to let you know that you are loved and deserving of everything! Today is going to be a wonderful day Stay safe everyone ⭐

  • @F-Man
    @F-Man6 жыл бұрын

    Holy mother of torque!

  • @epistte

    @epistte

    4 жыл бұрын

    electronic wheel slip technology was still a few decades in the future when this monster was dreamed up.

  • @sajeedalam4709

    @sajeedalam4709

    3 жыл бұрын

    2er द् fsfssdcat

  • @Paleoman52
    @Paleoman528 жыл бұрын

    There is a solar powered greaser on a line near my area and I often wondered if there would ever be a problem with wheel slippage!

  • @PainesvilleRailfans

    @PainesvilleRailfans

    8 жыл бұрын

    Good thought! the greaser is solar powered, and is turned on when the metal wheels short across the rails, other known as "shunting" just like how the lights and gates turn on within a certain space, except the crossings are powered by power lines and batteries. The greaser lays only a very thin bead of grease on only the flange way part of the rail for minimal friction, compared to the video, where the maintainer slapped lots of grease all over the rails, especially the top/head of the rail, where you will lose traction. some greasers are programmed to delay so it will not start greasing til the motive power passes through. Since the mid 90s, EMD and GE built engines with (if you ordered the correct trucks) come with built in greasers (due to the new technology) the trucks can flex around sharper curves. The grease is contained in a big trash like bag, that sits in a drum, and gets squeezed out like toothpaste when the train passes. There is an episode of extreme trains where they help out and work on the greaser.

  • @santinojozefmiller7721

    @santinojozefmiller7721

    4 жыл бұрын

    Painesville Railfans What county was the sin?

  • @alecmnsfield1258
    @alecmnsfield12582 жыл бұрын

    I wish these locomotives were still pulling the pullman cars as they were the pride of the railroads in their heydays.

  • @gerilynntarvin9402
    @gerilynntarvin94024 жыл бұрын

    awesome job I lived,loved the era of the steam locomotives,they have class.

  • @sristhambithurai8012
    @sristhambithurai80123 жыл бұрын

    Great video and well done to the guy on the throttle!!!

  • @southwestvirginiarailfan729
    @southwestvirginiarailfan7297 жыл бұрын

    Not that it matters, but you left the A out of situation. Great video! I bet the greaser got a stern talking to.

  • @PainesvilleRailfans

    @PainesvilleRailfans

    7 жыл бұрын

    NorfolkSoutherns#1Fan never noticed it thanks and i bet!

  • @southwestvirginiarailfan729

    @southwestvirginiarailfan729

    7 жыл бұрын

    Painesville Railfans No problem.

  • @waltersergio3032
    @waltersergio30323 жыл бұрын

    Thank you for your written explanation. Best regards from Brazil.

  • @1balky
    @1balky5 жыл бұрын

    The ease with which this beast spins those gigantic wheels....

  • @bubbaschannel1610
    @bubbaschannel16106 жыл бұрын

    Learned something new. Thanks.

  • @PainesvilleRailfans

    @PainesvilleRailfans

    6 жыл бұрын

    bubbas channel glad to hear! How did you find the video?

  • @PhanDung4738

    @PhanDung4738

    5 жыл бұрын

    Nhanhnhuchop

  • @alistairvlogs2624
    @alistairvlogs26245 жыл бұрын

    wheel slip occurring... traction speed decreased

  • @awakenedfallenking9941

    @awakenedfallenking9941

    3 жыл бұрын

    Yeah nkp 765 is wheel slipping

  • @matt995amg

    @matt995amg

    3 жыл бұрын

    Why doesn't he put sand?? Oh they do at the end

  • @aznmozez2214

    @aznmozez2214

    3 жыл бұрын

    @@matt995amg Read videos description

  • @freeman3320

    @freeman3320

    3 жыл бұрын

    Don't they have automatic sand dispensers?

  • @hiker64
    @hiker642 жыл бұрын

    Wow, this one video may have turned me into a railroad enthusiast! - How fascinating to watch

  • @Terramorfios
    @Terramorfios3 жыл бұрын

    На старых паровозах(например, 1920 годов), над каждым колесом были \песочницы\ - в них ссыпали чистый,сухой песок как раз для антипробуксовки.

  • @hermanman8235

    @hermanman8235

    2 жыл бұрын

    Just like in India..the difference is 2 men will sit on the very front part of the train(!!!!!) to monitor the situation/wheel.they throw sand/salt on wheel/track if there's a slip

  • @spencergreenhill7728

    @spencergreenhill7728

    2 жыл бұрын

    My father, CA 1905, when hauling clay for CPR in Baniff did the same greasing when CPR was going to put in a narrow Guage rr to haul clay. He was a teamsters alon with someone who still operates a tour bus line.

  • @user-ed2sp1bs3i

    @user-ed2sp1bs3i

    2 жыл бұрын

    У этого паровоза песочница тоже есть. Но видно в нее забыли песок засыпать. :-)

  • @MikeK2100
    @MikeK21005 жыл бұрын

    When man harnesses a dragon for his power! Thing's happen and just a little logic and patience gets things going back on track again.

  • @siavelis5513
    @siavelis55133 жыл бұрын

    When i saw this video for the first time i imagined this is a very good edit

  • @addisonirving3292
    @addisonirving32925 жыл бұрын

    Default profile photo 1 second ago Same thing happened here with J 611 on a fan trip in 1989. It was a Buffalo-Ashtabula round trip, west on the NKP, east on the parallel NYC. turning the consist here at Ashtabula. The J had to push its train through the connector and up the grade onto the Ytown Line in order to clear the switch, and the pull forward across the diamond and through the SE connector onto the Conrail Chicago Line. Same problem then, too much grease. An NS local working west of Ashtabula on the NKP had to drop its train and come to the rescue to couple to the J and help shove the train through the connection.

  • @milesthom3201
    @milesthom32015 жыл бұрын

    Helluva big loco! Be great to be there and see it live.

  • @ToritheGSMR1702-mz3rc
    @ToritheGSMR1702-mz3rc Жыл бұрын

    0:24 who also thought 765 was at speed 😂

  • @clydo1946
    @clydo19466 жыл бұрын

    On the last run of the Woodstock VT railroad, some young guys greased the rails on Shallis Hill. The passengers had to push the train over the top. This was in 1933.

  • @96Duelfuel
    @96Duelfuel4 жыл бұрын

    Great car that pulled around the corner. Crazy amount of torque

  • @jillsmcfarland2001
    @jillsmcfarland20015 жыл бұрын

    Thank you ! Excellent work

  • @anantdabholkar685
    @anantdabholkar6852 жыл бұрын

    I believe this must have been a test run, it was pulling 27~28 cars including a water tender!! That's a lot for a Berkshire wheel arrangement 2-8-4 Engine.

  • @jaggathebop4375
    @jaggathebop43755 жыл бұрын

    5:40 'please drive slowly. We our children'

  • @arnab_d9

    @arnab_d9

    4 жыл бұрын

    Love has left the chat

  • @arupnath3477
    @arupnath34774 жыл бұрын

    Chasing NKP 765 North East steam loco engine view is very nice. Our Traditional engine always Remember to past.

  • @honshukhan1
    @honshukhan12 жыл бұрын

    This is one of the best mechanical machine ever created.

  • @deysiescobar4357
    @deysiescobar43574 жыл бұрын

    what a train beauty I like that design

  • @donnawoodman6249
    @donnawoodman62495 жыл бұрын

    Thank you for providing such an informative description.

  • @PainesvilleRailfans

    @PainesvilleRailfans

    5 жыл бұрын

    Donna Woodman thank you

  • @LegoWormNoah101
    @LegoWormNoah1014 жыл бұрын

    It's oddly satisfying watching her drive wheels spin out of control.

  • @EdWhizAviationTrains
    @EdWhizAviationTrains3 жыл бұрын

    Beautiful footage and train, I Subscribed 😎👍

  • @fifthamendment2220
    @fifthamendment22205 жыл бұрын

    This train is awesome! Someone may have greased the rails thinking that they're funny. If so, I'm sure they topped off their evening cow tipping and giggling.

  • @petroldevo9934
    @petroldevo99345 жыл бұрын

    Since the town is showing up, have them push....

  • @railmastergaming
    @railmastergaming2 жыл бұрын

    by the wat, the description was incredibly helpful thank you :D

  • @patw7945
    @patw79453 жыл бұрын

    Love the sound of that whistle

  • @railfanprk
    @railfanprk6 жыл бұрын

    nice train

  • @markjines4959

    @markjines4959

    5 жыл бұрын

    Bit of a rise.slick wheels and rail plus lots of horsepower.

  • @willmorpheu
    @willmorpheu4 жыл бұрын

    Q lindo no Brasil é raro ver umas dessas conservadas 😢

  • @dd.greenefilms2598
    @dd.greenefilms25983 жыл бұрын

    Very Nice and Interesting, thanks for sharing this with the audience.

  • @mylittletrainbc909
    @mylittletrainbc9093 жыл бұрын

    Wow1 good lookin' steam train, Norfolk & Western one of our fovorite collection.....thanks for sharing

  • @travelingtom923
    @travelingtom9232 жыл бұрын

    It was common practice to have a greased rail outside the steam shops back in the day to check for problems after a overhaul. Mechanics could just stand and watch a few feet away if everything looked and sounded good.

  • @PainesvilleRailfans

    @PainesvilleRailfans

    2 жыл бұрын

    Yes! Not with just grease but with oil as well. There was footage on the net somewhere (possibly KZread) of the Louisville and Nashville Railroad's "Slip Track" where it was a dedicated track in that yard, near the shops to test the locos just outside at full speed. Love the footage they show in the video. I could only imagine how hammered and worn that track was. Thanks for watching! Please subscribe!

  • @Lemonator3103
    @Lemonator31036 жыл бұрын

    00:35 Jeremy clarkson is in there going "POWER!!!!" "GO FASTER!!!!!"

  • @KeeperOfPoops

    @KeeperOfPoops

    5 жыл бұрын

    James May: You pillock!"

  • @gabrielvieira6529

    @gabrielvieira6529

    4 жыл бұрын

    @@KeeperOfPoops lool

  • @PABackyardRevivals

    @PABackyardRevivals

    4 жыл бұрын

    The driver is trying to run her like it ole 97 on her last run on oil

  • @kennethmorrison7689
    @kennethmorrison7689 Жыл бұрын

    Thanks for posting! Great train & good filming.

  • @KG84C
    @KG84C5 жыл бұрын

    3.58 Nice paint job on that old beater!

  • @luischaves5128
    @luischaves51284 жыл бұрын

    Que bello ver esta maquina tan hermosa y de grande ingieneria

  • @ratecoudo
    @ratecoudo5 жыл бұрын

    A cop was taking a picture of that too hahaha very nice.

  • @malcolmabram2957

    @malcolmabram2957

    4 жыл бұрын

    He had a call at the time to say the bank had just been broken into, but he was getting his priorities right.

  • @adendangoaposi9416

    @adendangoaposi9416

    3 жыл бұрын

    Maybe his son liked steam locomotives?

  • @putrapribumi46

    @putrapribumi46

    3 жыл бұрын

    @@malcolmabram2957 q1aaa

  • @martonziegler2181
    @martonziegler2181 Жыл бұрын

    I am surprised that the sandboxes equipment was not working on the locomotive. A sandboxes is a basic requirement on all railway vehicles.

  • @inaciobrito8259
    @inaciobrito82593 жыл бұрын

    REALLY GREAT MACHINE 👍👍👍👍

  • @electronicshelpcare
    @electronicshelpcare5 жыл бұрын

    really it's so hard to start.you are so hard working man. thanks for this video.

  • @PainesvilleRailfans

    @PainesvilleRailfans

    3 жыл бұрын

    Finally someone read it! Thank you! Please subcribe and hit the notification bell!

  • @manorsachannel665

    @manorsachannel665

    3 жыл бұрын

    I like...

  • @goldenarrow5224

    @goldenarrow5224

    2 жыл бұрын

    really man it’s man so man hard man to man start man.man you man are man so man hard man working man man.man thanks man for man this man video man.man

  • @knox6802

    @knox6802

    2 жыл бұрын

    @@PainesvilleRailfansidjdkdbfj

  • @knox6802

    @knox6802

    2 жыл бұрын

    @@PainesvilleRailfans u

  • @airailimages
    @airailimages5 жыл бұрын

    Beautiful locomotive!

  • @kevp9601
    @kevp96012 жыл бұрын

    Steam Locomotives ROCK

  • @blankon2292
    @blankon22923 жыл бұрын

    This is majestic

  • @goodeye03
    @goodeye036 жыл бұрын

    Good thing they had so much help or they would have been stuck for a long time. Great catch.

  • @PainesvilleRailfans

    @PainesvilleRailfans

    6 жыл бұрын

    rich sheehan thank you!

  • @rangithsing7187

    @rangithsing7187

    6 жыл бұрын

    Gonna

  • @rangithsing7187

    @rangithsing7187

    6 жыл бұрын

    Egedbdy

  • @Nathan-gj8ch
    @Nathan-gj8ch6 жыл бұрын

    I use to do this to my toy train set

  • @ashokjangid3726
    @ashokjangid37262 жыл бұрын

    Beautiful capture bro

  • @porternesbitt
    @porternesbitt3 жыл бұрын

    She's like: Just..a...little...FURTHER!!! Love the 765 and all berkshire engines.

  • @trustyoldiron5416
    @trustyoldiron54164 жыл бұрын

    Well, on the bright side if there were any mild flat spots on the drivers there isn't anymore.

  • @dipakm9157

    @dipakm9157

    3 жыл бұрын

    Gg

  • @Mr91495osh
    @Mr91495osh2 жыл бұрын

    Newer locomotives have sand injection systems.

  • @daniko4447

    @daniko4447

    Жыл бұрын

    and?

  • @asingh5482
    @asingh54825 жыл бұрын

    Lovely.....the loco looks frightening

  • @waldemarjanhre1252
    @waldemarjanhre12524 жыл бұрын

    A velha locomotiva esbanja potência parece ser mais potente que as locomotivas a diesel, essa maquina e magnifica Obrigado pelo video

  • @KARTAVIDEO2TRAINS
    @KARTAVIDEO2TRAINS5 жыл бұрын

    The locomotive is very big. 22/5000 Old-fashioned but still good.

  • @masngatno3108

    @masngatno3108

    5 жыл бұрын

    Rrgc mu6t4121124454578

  • @algrayson8965
    @algrayson89656 жыл бұрын

    Flangeway greasers are not uncommon. They apply grease only to the inner flank of the rail head. The NC&StL J3 4-8-4 "Dixie" class of 1943 had the two leading sets of drivers in bearing boxes that stretched across the frame - joining the left and right bearing boxes in a single casting. The leading four drivers had a couple of inches free side play in the frame (not "frames" - the J3 had a one piece cast steel main frame that extended from the pilot mounting brackets to the rear buffer and coupling link housing, incorporating the main air reservoir). The lead truck had a center pivot bolster connected to the truck side frames casting by swing links, allowing some side play. On curves the swing links acted to increase the loading on the lead truck axles. The J3s could negotiate a 19° flat curve under their own power at low speed without binding. How is the NKP Berk designed in this respect? It is one of the last road steam locomotives built in the USA.

  • @PainesvilleRailfans

    @PainesvilleRailfans

    6 жыл бұрын

    Al Grayson im not too sure how the design of the berk platforms out to compare what you mention. There is alot of unique technology in steam locomotives

  • @Kleman09

    @Kleman09

    6 жыл бұрын

    The rear two drivers flex some to allow 765 to negotiate tighter curves.

  • @marcelosantiago8540
    @marcelosantiago85405 жыл бұрын

    If you can, look for the video "Locomotivas a vapor Baldwin em São João Del Rei-MG". They are part of the railroad compartment of the small town of São João Del Rei, State of Minas Gerais in Brazil. The country bought many US steam engines in the late 1800s and even today several of them work for leisurely tourist trips. And it is the only one in the world that works under 0,60cm gauge. As soon as I can, I'll make more videos about this railway complex that shows how life was in the late 1800s and early 20th century.

  • @fancillluio7544
    @fancillluio75444 жыл бұрын

    The first time I saw a train with wheels slipping, no wonder there was such a behavior as sanding.

Келесі