Change These Buttons TODAY / Canon EOS R5/R6/etc
No more digging in the camera menu when changing autofocus settings! In this video I demonstrate how to configure three settings on the Canon EOS R5 / R6 (and other EOS R cameras) to make autofocus SO MUCH BETTER when shooting handheld.
=============================
Reference Links
=============================
Canon EOS R5
geni.us/x1qWvob
Canon EOS R6
geni.us/JOAyPX9
Atomos Ninja V Monitor
geni.us/lH7lITS
=============================
Chapters
=============================
0:00 Intro
1:26 Back button autofocus
2:17 One Shot / Servo
4:23 Eye Detect AF
7:26 Touch and Drag AF
9:25 Outro
=============================
Gear Used to Create This Video
=============================
Camera: geni.us/x1qWvob
Lens: geni.us/DlD0
Monitor/Recorder: geni.us/lH7lITS
Microphone: geni.us/qmVjq63
Audio recorder: geni.us/ABAEu
Key light: geni.us/cElYW
Fill light: geni.us/sxel38
⬇️ Rec.709 LUTs for Canon and DJI
bit.ly/dominey-luts-presets
Complete gear list: kit.co/todddominey
=============================
Follow and Contact Me Elsewhere
=============================
Instagram: / dominey
Twitter: / tdominey
Blog: dominey.blog
Photography: dominey.photo
Email: dominey@gmail.com
=============================
Music
=============================
All music via Musicbed. 30-days free through this link!
www.musicbed.com/invite/uxZ1j
=============================
Affiliate Disclosure
=============================
Some of the links in this description will direct you to online stores where I may earn referral credits from qualifying purchases at no additional cost to you. If you want to shop and support this channel, you may also use the following storewide links.
🛒 Amazon: geni.us/gotoamazon
🛒 B&H: geni.us/shopbandh
🛒 Adorama: geni.us/shopadorama
Пікірлер: 176
Hi Todd, a variation for you, I also shoot front button servo with face detect tracking and as a result find this to be the most accurate way to select who I want to focus on 90% of the time as a wedding photographer. I have my back button (AF-On) set to eye detect and use this for portraits only. However my * button is set to One Shot with the expanded AF square so that if I need to shoot through a crowd and focus on one face or an item, I can position the focus point manually by the touch screen or joystick and be sure its not going to jump to something else. For weddings, I also use AF Case 2 which continues to track subjects ignoring possible obstacles. These are what I have found to be the best settings and most comfortable to use. Back button focus when you are shooting a 10 hour wedding means your thumb aches and its less comfortable than the front button method. I am lucky as I have big hands but anyone with smaller hands I am sure this can be a factor. There is one thing which I love that I don't think many Canon users know about. Try this, it is amazing when I first discovered it. Set the front Depth of Field button which nobody uses anymore to Magnify on playback. When you take an image press this and it punches into the area in the frame that it focused on to check its sharp. You dont have to scan around the image. Press again to zoom out to full preview. This shows in the viewfinder and on the rear screen so while shooting you can check you have focus very quickly without appearing to be chimping all the time like an amateur. Works on R5 and R6. Hope thats useful.
Great. just got my R5 today. Im a little overwhelmed but this video helps a lot. THANKS!!
Okay got one for ya. Instead of one shot/servo on, use AF-OFF or AF stop. Then when shooting once you find your focus and want to adjust your framing you just hold that button down and the camera will fire when ever you like. It’s essentially the same thing as the eye tracking toggle trick he suggests (which I love and is a game changer) it’s basically making the camera go to one shot mode but it’s not a toggle. I personally feel like I would forget to toggle it back and fourth when things get moving fast so this just eliminates that from happening for me. I originally figured this out with my old 5d ii which didn’t have the best low light focusing so I would use it to tell my camera to stop focus hunting once I saw it was close enough to sharp.
Wow, I remember when I discovered back button focusing 10 years ago for my 6D MK I. When I upgraded to my R5, I fell back to the default settings, and now after 3 years, I realized that I was a fool, and all the frustration with AF came from my lack of - again, using my back buttons. Thanks Todd!! Feels like my workflow just got a step better again.
Atlast someone explaining a way to configure these Buttons in a good way! ❤
Most useful tips ever Sir. Thank you! These three things were my 3 biggest gripes and this fixed them perfectly.
Perfect timing Todd! I was just doing research and watching many other videos about best recommendations for these buttons. Thanks!
I have an even more customizable option for you. The problem with setting AF-On to toggle Servo->One-Shot is that both modes need to share the AF Method. (The type and size of box). So if using Servo you enjoy having a tracking option as default (denoted by "🙂+ tracking"), then when you toggle over to One-Shot it will use the same AF Method, which I think is pretty useless for One-Shot because it will pick from the entire screen. So intead of using Servo->One Shot as the setting, I use the "Detail Set" option under "Metering and AF Start." This allows you to specify One Shot or Servo, the AF Method and even Servo Characteristics. As an end result I have these options at my fingertips: Shutter alone: Servo with 🙂+ tracking set as the AF Method. This allows me to "grab" a subject within the box and it will track it all over the frame. It also picks up eyes AF-On: "Metering and AF Start" with DETAIL SET set to One-Shot and smallest box. This immediately gives me a single AF point that will not track or move, unless I move it with the joystick *: Eye-Detection AF Grid Button: "Switch to Registered AF Func." with DETAIL SET set to: Large Zone AF: Vertical. This gives me a vertical box that is roughly 1/3 the frame that has tracking inside of it. This is great for tracking a couple at a wedding coming up the aisle and not picking up random guests on the side. So that's 4 distinct focus modes- the bare shutter + 3 specialized buttons.
@alexsrank
Жыл бұрын
Jeff I was gonna say I have it the same as Todd plus also using the grid button - so I also have the back button focus as I liked to split it from the shutter in the recompose world (got my R6 recently still getting used to it) - but am going to pull out the camera and try your set up - many thanks!
@tekguyphoto
Жыл бұрын
this would work great for shooting birds in flight. You just gave me a great idea how to setup my C1 for birds in flight vs landing on a branch. Didnt see the detail option and what extra settings it offers on my R5. Great find.
@georgeandreou695
Жыл бұрын
These are great tips, thanks! Love the Detail option, which I also didn't know about. My only concern is, using the shutter button to focus may unintentionally shift my acquired focus at the time of exposure. I guess I'll see with experience.
@24_meamu
Жыл бұрын
Jeff it would be great if you make a small video about it 👍. I am new to R5 and going through learning process... Recently switched from M50 to R5
@henrikolsen5
Жыл бұрын
Is it possible that this unfortunately isn't available on the original EOS R? I can't see a "Detail Set" under ""Metering and AF Start". I do agree it's a great setup. I will use on the R6.
This has been one of the BIGGEST problems since I purchased my camera! Thank you! Also, while I love the concept of touchscreen focal points, it's just a huge pain for me. So in the video, you also helped me figure out how to disable that and turn on the button that moves the focal point around like Canon's DSLR models. Our camera settings are as unique as our photography, and customizing them to our personal liking is huge! Thanks so much! You gained a new follower today! Cheers!
Another great video by you Todd, I look forward to more useful tips. Keep up the good work.
Thanks for the touch and drag information! I've seen a ton of videos on back button focus and that's all I ever use but I've never seen anyone talk about the touch and drag option. What a great tip! Thanks a gizillion!
Excellent video Todd. I have watched a number of these as I am trying to get up to speed with the 6R mark II focusing. Yours is the best I’ve seen so far. Well done! Thanks!
Thank you soooooo much for this! I got this camera not too long ago and this will be so incredibly helpful!
Back button autofocus made the most sense to me, then I saw your video. Thank you for this !!
Just bought the R6.. very happy with my choice. You Todd are my 'go to' guy to help me with this new beast.. I do more video than photography, but am enjoying learning more in that space. Thank you..
commenting half way through watching - the eye detect assign is a gamechanger. being able to keep center or another af mode, and easily engage eye detect by holding it is perfect !
Thank you for this very comprehensive video. As someone very new to my camera, I need complete and thorough explanations. This made me feel so much more confident!
This is super helpful Todd, thanks so much! Can't believe how useful the touch and drag is.
@dominey
Жыл бұрын
Awesome! It's been really helpful for me too.
Best explanation ever. Just bought the R6 and struggled the whole day trying to focus on the most engineer way. This set up will help me a lot! I hope. Thanks very much
Super helpful tip - will implement on my R6 immediately. Thanks Todd!
Great video. The idea of toggling the one shot vs servo will serve me well I think. Like you, I used the half pressed shutter release for focus, always have and that will not change. I just subscribed and feel that I am going to learn a lot by watching your videos. Thanks!
Very helpful and informative videos. Love the setup and your style.
Thanks for the simple presentation to help with the focus options of the R5.
This video is a lifesaver! Thank you SO much for making it! ♥️
I love these changes, I can see that they are al ready going to help me!
Massive usability improvement - thank you!
Best AF setup I’ve seen. Many thanks!
Hi Jeff Just found this vlog altered some other buttons to suit my photography style this helped no end thank you so so much just brilliant .
I've tested this settings for two months and they changed my experience with the R5. Thank you! 😊
@dominey
Жыл бұрын
Mine as well! Glad it was helpful.
This was very helpful! Thank you!
Hi Todd, great video, I have the same exact configuration! Thank you!👍🏼
Thanks so much! Your sharings are much appreciated. Subbed!
I used to be a rear button focus person, but that was in days long ago when the only really accurate focus point was the centre. But nowadays with modern mirrorless cameras you can accurately move the focus points from a vast selection via the toggle.... Good video - thanks
This was amazing! Thank you. I struggled recently during a photoshoot, and this would have been great. So now I know!
Thank you so much! this changed definitely the way I work!
Super clear and useful, thank you!
I just read this morning a professional wildlife photographer recommending back button auto focus. I've been shooting pretty much as my camera came out of the box 2 years with the R5. I photograph birds and in flight is what I want most, I miss a lot of shots! Interesting to hear you say it doesn't work for you, I'm not sure why this seemingly less convenient technique is better but thought I'd try it. Your video popped up when I was looking for how to set this. Thanks for sharing your knowledge! We'll see where this takes me...
Excellent video and tips. Havent seen these suggestions before, so I'll give them a try.
Todd Thank you so much for this tip! It will save me so much time on wedding days!!!!!! Thank you sir!
Great video Todd. Well done.
Great, That worked for me. Much appreciated it Todd.
It was very helpful, thank you!
I agree that I cannot get used to back button focus. I also don’t like moving the focus point with the screen. Instead, in the AF5 menu, see initial focus point to first option (NOT auto). Set camera to SERVO. Leave Eye Detect on. Look in viewfinder and place center box over your subject - this can be a face or not. Half press shutter. Recompose while shutter half oressed. Focus will remain where you wanted. If this is a face (animal or person, depending on your menu setting), focus will grab eye. If not, it won’t - no problem. Simple!
Thanks. This is a very smart video you did. You didn't try to do everything; you focused (excuse the pun) on two specific buttons, which is important for those of us doing our best to set up our cameras to take the best photos possible. Very refreshing to see this type of video.
Wow, just found your channel, only watched this one and the clog3 exposure one so far but both are fantastic and have extremely useful info, can't wait to watch more!
@Yvesphotoandfilm
Жыл бұрын
those are the ones I also saw first! subscribed
I can’t get on with the toggles. I left the EOS R specifically and only because of the toggles- the half second it took to glance at which focusing mode I was in, or the mental calories it took to remember which mode I left it in, drove me crazy. The 5Diii had a “registered AF point, which could be recalled instantly with a back button and one shot to servo could be switched by holding or releasing the DOF preview button, resulting in sort of “combo presses” to instantly recall whatever focusing methods you wanted (no checking, no toggling, no trying to remember which mode you left it in). When I owned the EOS R and borrowed an R5 I found the “Info/detail set” sub menu under the “AF ON” option for the back buttons and I realized each button could be assigned to ALWAYS use a specific AF mode/method. For that functionality alone I bought an R6 immediately. Now my AF ON button is always set to tracking/servo, my * button is always a single point in one shot, and the AF Point selection button is set to “recall shooting function” with auto iso and auto white balance selected (my “oh crap, the scene changed faster than I can figure out the proper settings” button). No toggles, no looking at the camera, no menus.
Great info another way of looking at it .Good video. Thank you
Thank you , makes focusing that much easier.
With my R6 I have tracking with eye AF enabled all the time on the front button. I have my AF-on button set to single point auto focus when I need to choose the subject. I think I will try that asterisk button eye-af toggle and see if I like that also. Thanks for sharing your knowledge and best of luck to you!
Great Idea! I’m like you, I have used the half press on the shutter button for way to long. I don’t think I could change now. But I like your idea on this video. I am going to try it. Thanks, Jim
Thank you so much for making this video I will try it out with my R.
Thanks mate, that was just right in setup info
Thanks, my man. You showed me somethings I changed on my R5.
i like the new setup, thank you
i like it ,your video was very helpful. Thank you so much .
This is excellent - thank you
Great video!
Thank you for this information about changing to AF on the fly.
Thanks for the info! :)
GR8! Video. Thanks
very helpful. Thank you.
Great advice, thanks much!
Thanks for the informative presentation. Essentially I have been doing something very similar. Question I have is your suggestion of how to easily setup a custom button to disable all back button focusing and hand the camera to someone to take a picture of yourself while you don’t have to explain the back button focusing?
The only reason I used BBF on my DSLR was because if the limited autofocus points, now I can spot focus anywhere in the frame and move the focus point super quickly. Instead, I use the AF-ON as my Eye-AF button and otherwise am in spot autofocus. This is optimal setup for general shooting I have found. The * button then becomes a second MENU button which is awesome. It’s much faster to use since I can do everything to control the camera with the shooting hand while keeping the supporting hand to control the lens. It also allows me to quickly move through the MENU while looking through the EVF. This has been for me the first thing to change on a new camera. Highly recommended!
You've made my life so much easier.. thank you 🥲
Just got my R6 mkll and will give them all a try. Being new to Canon it should be interesting.
I just got the R5 and I'm used manually toggling my focus. I've made the changes & will see how it works out. Thanks!
Hey Todd ran across your video and I have made the changes you have shown. I will look at that touch and drag part but for now out shooting with the back button changes!
I always make my way back to your videos as they are extremely thorough and helpful in a myriad of ways. Are you still shooting with the Canon R5 now, or what are you shooting with now?
GAME CHANGER for me Todd! Thank you!!!!
@dominey
Жыл бұрын
Awesome! It's so much better.
Amazing video
Great video, I have just changed my M6 Mark II to these convenient settings. THANKS! I will do the same on my R7 (If it ever ships 😆 )
This is genius. Thank you.
nice tip #2 to move the af pts w thumb. Thank you! Can we custom set a button to shift between zone AF and single point af?
Haven't tried it, but we could potentially use servo while still recomposing off subject - by using the rear screen and thumb to quickly move the focus point from shot to shot. Oh.. he mentions this.
Very nice presentation and usefull videos.....Thanks Todd. Iam from INDIA.
I use the AF button for Zebras, and the 2 thumb buttons for Manual focus guide and Focus Peaking.
I could never go around using BBF, not my cup of tea :) using your setup is just brilliant, works for me like a charm. Thank you
This is great! Recently I forgot the 👁 focus on and I almost went insane. The camera was struggling and I wasn’t getting why… with this button configuration I hope not to make the same mistake again. How do you configure these buttons for video?
I guess we think alike - I have been using this setup since the R - works like a charm for my photo style.
Thany for the nice AF - Tipp, i will try it out on my EOS R - Greetings from Düsseldorf Grermany
Interesting suggestions, I'm wondering how do you engage eye detection and move the focus point, it seems that with the left hand. I'll give it a try but it does not sound very promising!
Thank you!!!
I found your tips in this video to be excellent. I'm still lost for finding how I can turn on the toggle button to also control my focus position. Is it possible to have your drag and move AF on while looking through the view finder and have the toggle active for AF positioning for when Im looking at my back screen or through viewfinder?
1:00 if you shoot people, events, weddings, models or birds … you’ll find the back button AF absolutely indescribable! Anything that needs to be tracked and captured at the right time like dance for example, you hold the focus button and press shutter to capture at the right moment. You can be always ready by pre focusing and waiting for that moment and then lay off the shutter and go again when the moment is right. You don’t have to another Target acquisition like it happens when you have AF tied to shutter release. It can even to beneficial to real estate photographers who take multiple shots with various exposures to merge later. You set the focus once and use the release button without worrying about the camera focusing elsewhere on the scene and ruin your photo merge!!
The AF is so powerful in these cameras that you can rely on the subject tracking 95% of the time, and single point AF for the other 5%, and basically forget about the area focusing options. This means I only use two buttons for focusing: AF-on button: Servo AF with eye detection. I also set "Initial servo AF point for 🙂+ tracking" to "AF pt set for □", this lets me select where I want AF to start, rather than having the automatic floating boxes around subjects which can be annoying to select when there are multiple faces in your composition. Star (*) button: One shot AF with spot focus point, used for still scenes or if I know where action is going to be. The AF point can be moved around using the multi-controller or touchscreen/touch-and-drag. Shutter button half press: Metering only (no focus or AE lock, I have AE lock set to the * button if I need it).
@omgomb6520
Жыл бұрын
sounds great idea; I set my R5 like what you did "AF 🙂+ tracking & eye detection", then "Initial Servo AF pt set for □". Still, I have problem to keep the auto focus boxe"s" floating around away from the □. Pls advise was there any step I missed. Thanks
@Skux720
Жыл бұрын
@@omgomb6520 Hi, I'm not sure what you mean. If you select the "AF pt set for [ ]" option, you should not see any floating boxes around eyes when you are pointing the camera at them.
Brett Carlsen also has a sweet setup for these buttons... 🤟🏼
Todd thanks for this video I'm using a Canon R5 for the last two months. I'm trying to figure out shooting in manual mode sometimes the ISO is in 800 and then I notice minutes later that ISO changed to Auto do you know what bottom I might be clicking or need to disable to change that function, if its available in any bottom that by error I might be pressing. Thanks What I need to look for to disable in the custom bottom functions.
Thanks!
Todd, probably the reason why BBAF never caught on with you is that you primarily do landscape photography, which means much more time in composing while in wildlife and bird photography the need to quickly change settings means the difference between getting the shot or not... the new mirrorless cameras have changed the game on this though, even for us wildlife guys...
Great video. I wish there was a way to map a button on the R6 to toggling continuous AF. (I know servo AF is continuous AF while the AF-On or shutter button is pressed/half-pressed.) When my lens is continuous racking focus, it can be a bit distracting.
I have a question. In the way you have set up the shutter button, when you use any of the back buttons to choose One Shot or Servo or AF Eye Mode... If you don't disconnect the half-press focus on the shutter button, does the camera try to focus again? The video is very instructive and simple. Thank you, Carlos.
The setup I've been running is similar to yours, except my AF-ON button is always ONE SHOT focusing on my current focus point, while my half press is always SERVO with lock-on tracking. This works quite well, since I can then use the AF-ON button for "focus-and-recompose".
@richjane77
2 жыл бұрын
That sounds good. Question though, don't you activate servo when fully pressing the shutter during One Shot?
@tom_corremans
2 жыл бұрын
@@richjane77 no you don't, as long as you hold the af-on button and take the shot.
@gabedamien
Жыл бұрын
@Tom - ah, holding the AF-ON button to override the shutter setting was the missing puzzle piece when I was reading various AF configuration strategies.
Hi Todd, quick question, are all cannon camera menu's similar?
Thank you.
Have you had any issues with the Atomos recorder like skip and drop frames or overheating?
great, thx
Hi Todd, i still use the rear button to focusing, then i came from 7D Mark II, i will try to go back to the standard solution. The rest of the buttons are like yours.
I also never got used to this back button focus thing and what you just explained is what works for me. As usual, video and audio on your video is top notch, it's very enjoyable to watch your videos because you seem to care about your audience.
I agree I don’t understand how back button focusers don’t see how much more convenient it is to half press shutter button than to back button focus. I’ve tried back button focus and it is extremely unnecessary for me and very counterintuitive in my opinion.
@GuillePozzi
2 жыл бұрын
It depends on your needs. With back button focus you can frame, focus, and reframe while keeping that focus locked. With half-press you can’t do that, unless you press and hold a “hold AF” button, which in that case back button would be better
@lingfish1
Жыл бұрын
@@GuillePozzi Not entirely true. You're assuming people are using servo and not one shot AF; for decades I've rarely used servo, so in one shot, I can easily half-press, meter and focus, hold it, recompose and complete the shot.