The new version supports HDMI 2.1, but it’s still limited to 4K at 60Hz like the old version (for now at least). I may have to do some audio tests to see if there have been any improvements there. Also a lot of people are using 4K SDR as their default output and matching dynamic range, which is another great option since you have 4:4:4 chroma (higher quality) available.

@Djems94

3 жыл бұрын

I also prefer use SDR by default because otherwise it forces Dolby vison on SDR contents like the KZread app for example (still no HDR on it by the way), which I really don’t like.

@mikeweatherford5312

3 жыл бұрын

@@Djems94 The new ATV does play back 4k/60/HDR youtube video's. But you must manually switch to HDR mode, it does not auto-switch like netflix/amazon. You can see the stream youtube is sending you in the youtube app options.

@mentalman1369

2 жыл бұрын

@@mikeweatherford5312 can confirm this is the case, which is very frustrating. Because in order to enjoy KZread VP9 HDR videos, you have to set the ATV video output to HDR (rather than SDR or Dolby Vision), but then the entire Apple TV interface, as well as any SDR video content on KZread, will all be tone mapped to HDR10. This is mainly because Google has not bothered to support Match Dynamic Range *or* Match Frame Rate that Netflix, Disney+ etc all support. This means, you guessed it, 24p content (or any frame rate) on KZread is all forced at 50Hz or 60Hz (depending on your settings). My guess is they want to avoid the blackout when changing dynamic range or frame rates, esp since a lot of YT videos are so short. But at least give us the option turn matching on and off!

@Nandocupra

2 жыл бұрын

Hey Villaman i have a probleem. I have a Apple TV 4K 2021 model and a denon h4700. When I put the setting Dolby atmos on my Apple TV I hear all the time sound skipping. Please help me thanks 🙏

@salahuddin1994

2 жыл бұрын

@@Nandocupra I had that problem too audio skips and video skips often , if your ATV is under warranty you'll have to replace it... I replaced mine and no issues now.

Hey wonderful presentation, with simple instructions for old people. Your suggestions not only helped with my new Apple TV 4K, but allowed me to figure out why my Nvidia and Firestick 4K looked so awful on the Samsung, I had not realized how much influence the streaming device display settings had on my tv. Keep it up my friend.

Your tips were on point. I just adjusted my Apple TV setting primarily with it. Especially the video output, chroma and colour calibration. Thanks, man!

Great video mate, learned quite a few things. I am watching your video on new iPad m1, the hdr from your stream is amazing quality.

Thank you for making the color balance setting more clear to me! This helps make the colors more vibrant when streaming vids from my 2021 Apple TV 4K to my 65” Samsung Q70A!!! Much appreciated 😎✌️

Thank you man!!! Straight to the point and no bs. Great channel! Keep it up

Finally! I appreciate your video. The movies were not watchable because of darkness and then I followed your video completely and I can see the screen now! Thank you!

You did a great review here! You took you time, we’re through. And the video quality was fantastic!

These are some great tips! Just subbed!

Thanks for all these tips. It has made our Apple Tv experience much better and we choose to make it our primary tv box. Thanks again.

Very informative, and very easy to understand. Keep up the excellent work!

Thanks for this amazing video. I find your delivery style to be very easy to understand but at the same time quite complete. 😀

Hey man firstly thank you for all that you do! The bug you talked about with HDR not being activated seems to also be happening on KZread itself now despite having 4K SDR and math content and frame rate turned on for me. It worked just fine on your videos when I first hooked up the device last week but in the last couple days it stopped working. Do you know any update about a fix to this bug or any way to fix it?

Great video! Im currently using Fubo TV through my Apple TV 4K and love it. When watching cable TV I have the settings on Apple TV set to 1080 SDR for best possible picture. I much prefer the 1080 SDR setting when watching cable content. When it’s set to 4K HDR the picture looks off. The problem is when I go to use Netflix, Disney +, or KZread etc., I have to constantly go into settings on Apple TV and switch video back to 4KHDR for best picture. It’s annoying to have to constantly switch back and forth from watching cable then going to streaming 4K content. My question is..is there a way around this or is this just something I have to deal with? Thank you!

Super in depth. Love it!

Long time watcher and certified AV Holic of over 30+ years and really enjoy what all of you and a lot of the other AV heads that I totally respect and love to hear the different opinions and ideas, being from the UK we apologise for everything lol, so saying that can I just point out, The Apple TV switches to HDR or Dolby Vision automatically and without trying to come across as a jerk but the settings should be set at 4K SDR and obviously have matching frame rate and dynamic range set to on, otherwise no matter what app or screen you are on it’ll always be a forced HDR / DV signal, I’ve tested it on everything from the ‘App store’ and then checking the output info and that says HDR when in real world it isn’t and that goes for every app or show that isn’t in HDR, it shows HDR on the info, but switching to 4K SDR allows the TV to transmit HDR or DV as and when detected..I hope this makes sense and I hope you don’t take it as a dig or negative comment, just trying to help. Cheers Love, Purpose n Peace MCD

This was extremely helpful. I followed your directions to the T.

You are really underrated keep up the good work👍😁

New subscriber here. We are new to AppleTV. We recently upgraded internet from 0.1-3.0Mbit to 200Mbit on fiber. So the tv service comes with AppleTV. Prior to this we used Dish satellite & Roku streaming when we could. I am wanting to learn how to pair the AppleTV remote with my surround sound amp. Your video is very clear and I look forward to viewing more of your videos. All the best!

Great work Villaman. Thank you for these settings. Moving soon and upgrading my Man Cave TV (probably LG CX) and thinking about Purchasing this streaming box. Would you recommend this, with that TV and a Sonos Surround system? Or would there be a better option?

Great video! Could recommend the appropriate set up of cable connections for this case. If I have a TV with regular HDMI ports and 1x eARC HDMI port + a sound bar with regular HDMI and 1x eARC HDMI port how should I connect to get the best audio and video? Should it be: - from Apple TV to eARC HDMI port on TV and from TV HDMI to Sound bar HDMI. Or - from Apple TV to eARC HDMI port on sound bar and from HDMI port on sound bar to HDMI port on the TV. Pretty much I’m trying to figure out which device pair should use the eARC port. Thanks!

Thank you! Really made a huge difference.

Exellent video I just got the LG c2 77 yesterday and I've been busy but it looks amazing and I haven't even started with the settings yet, and I was thinking of one of these as I normally use a 4k Max fire stick are these better and if so why...?? But love this video as this will be most helpful if I do decide to get one so cheers, all the best from Birmingham

Thanks man. Completely changed my viewing. Much appreciated

Thanks, Brother... Another old man appreciates the help. Cheers. Jim

Great video, thanks for the advice!

I find it better to set the Apple TV to 4K SDR 60. This will allow 4:4:4 chroma on SDR content. If you put match dynamic range on you will still get HDR and DV as it is supposed to be shown

@christophercolumbus8602

3 жыл бұрын

Incorrect.

@lpad321

3 жыл бұрын

@@christophercolumbus8602 what do you mean?

@toddyoung277

2 жыл бұрын

Yeah, most AV experts I’ve come across tell you to use 4K SDR and match content as the best settings. Helps prevent the unattractive blowout of the menu colors.

@B1ackAlloy1992

2 жыл бұрын

I agree with this. Cause of you set it to 4K SDR your tv will know when to switch to HDR and match the content of whatever you are watching. Cause if you set it to 4K HDR then the Apple is doing all the upscaling and then it is like doubling down on HDR and making everything pop more then it should. Me personally I did not like the way it looked when I had Dolby vision selected.

@TravionMusic

2 жыл бұрын

Same here man, and I was wondering is 4:4:4 better than 4:2:0?

Is there a notable quality difference between the Apple TV app that you get built in with Samsungs tvs, and Apple TV 4k? My tv still shows 4k films in HDR with the app, but I do wonder if I get much better quality by getting the Apple TV 4k.

I just changed it from 4K SDR @ 60Fps 4:4:4 to 4K HDR @ 60fps 4:2:2 and I confirm that the shadow detail, colours and overall picture quality especially smoothness in motion has improved without the soap opera effect. Thank you @Villaman, but is it same for every one . I can experience this in every content I watch now, Netflix, Disney+ or KZread, I can youtube HDR content is has whole new level of improvement. Be it Dolby Vision or SDR content. I like 4K HDR setting more now. The TV I use is X90J with certified HDMI 2.1 cable

I find the best thing about Apple TV box... one is able to increase and decrease volume extremely discretely,! Perfect for us home theatre enthusiasts

Awesome video Villaman I really like the new Apple TV gonna compare it to the Nvidia Shield.

Thanks..the best explanation on KZread 😃

I really all your videos. I would like to know whether the Apple TV 4K 1st Gen or the inbuilt Apps on my Sony A8H will deliver the best picture quality especially in HDR 4K?

In order to get the full 4K, does it have to be plugged into the HDMI 2.1 120hz? Or is it meant to go into the HDMI 2.1 60hz? Thanks!

Great thorough video, Tha_VillaMan!....Please review Apple TV 4K (2022)...Thanks in advance!

Thanks,great explanations for all settings we need to mess with. Would love to see you tackle one of the new Anthem receivers showing how to set it up and how to run ARC. Thanks

Remote’s touchpad is very fast(in a not so right way).Yesterday only I got delivered the box ,will take time to adjust.Nice video btw

Are these on applicable with the newer Apple TV device, or can you use for 2020 model?

This was great. Thank you.

Good, practical demonstration and information

I have a hdmi 8k 2.1 cable but can’t select chroma 2.4.4 can u help? Thanks for the great video!😊👍🏽

Great video. I cant wait for Foundation to release later this year it’s going to be pretty sick

Nice set up. Ever going to add any kind of home theater audio?

@tHAvIlLaMaN

Жыл бұрын

Heh, funny you should ask that kzread.info/dash/bejne/gYejyNxphKy1pZs.html

Hi Tha… I really like your video very helpful. I have a question about my 4k Apple TV 2021 . I try to hook up it with my Marantz sr7009 but have no audio and video at all if I hook up with my 4k Samsung tv 2017 it is working fine , when I try to connect it with marantz receiver have result like I said above no audio and video. In the audio and video format I setup 4k SDR . My hdmi cable is fusion 4k and 8k quality high speed cable. So, do you have any idea about this symptom. I really need your help. I hope to get response from you soon. Thank You

Still holding out on that QN90A review! Love your vids btw!

@tHAvIlLaMaN

3 жыл бұрын

I’m working on it!

@jesusisreal2604

2 жыл бұрын

Pray this prayer to be saved dear God I know that I am a sinner I repent of my sins I accept Jesus as my personal Lord and Savior in Jesus Name I know Jesus died for my sins and rose from the deadAMEN

Does the earc function make it sound better and less compressed then the previous model. That’s what I’m worried about

I use my ATV 4k (older model) to playback home videos that I create in Final Cut Pro. When I have the ATV set to 4K HDR and also have the the match dynamic range enabled if I play a video that was edited in a HDR library it plays back great and looks amazing. The problem becomes if I'm playing older videos that aren't HDR when I play back it looks jerky or un smooth almost like the frame rate is off. It's not off because I also have it set to match frame rate. So now I have to go back into settings and just use 4k SDR and the older videos play back fine, but just don't look as good.

Glad I watched this! I have all the right hardware for Dolby Vision (65" LG OLED) and Dolby Atmos but I couldn't figure out why I wasn't seeing Dolby Atmos scroll across my Samsung Dolby Atmos soundbar or seeing the option for it in the Apple TV audio settings. Well...unfortunately, I had my Apple TV HDMI first going through my Hue Sync Box then from the Hue Sync Box to my Samsung Dolby Atmos soundbar. So it appears the Hue Sync Box can't pass Dolby Atmos to my Dolby Atmos soundbar.

Very helpful. Thanks!

Sir M buying Apple 4K tv which Monitor would a great combination with that?

Great job. Took your advise .

If I don’t have separate speakers, only using TV speakers where should I connect Apple TV 4K ? …Can it be any HDMI port on the TV, or should it be an HDMI ARC/eARC port?

Hi, currently chroma 4.2.2 so should i use 4k DV or 4k HDR? My tv is LG C7 oled

Should you connect the ATV to the soundbar or the TV?

It would have been a great review if you have connected it on your projector to see the picture quality difference… and to see if the color calibration works on UST too…

Hey villaMan When I select 4k hdr on my Qn90a I noticed the color red is off. That is specially apparent when I open Netflix the Netflix logo is pinkish not red . That doesn’t happen when I switch it to SDR

Hey. I have a view Sonic monitor with the Apple TV 4K. I can't control the volume up or down. and no pause either. It just comes out at an average level. We have fans blowing and other noises and I need to turn up the volume and CAN'T. or down cause some commercials will blast you out the front door. ;) Ive tried the settings to no avail. Could it be the monitor screwing up the volume control? I have an iPad mini, but have somewhat of the same problem there too. Its on auto. I seen the volume go up all by itself on the pull down deal on the iPad mini. I was staring at it and up it went by itself...what?! Thanks for you videos!

I just checked and updated the Apple 4K. They fixed the problem with Amazon not playing HDR content. But you should never select 4K HDR as the default. It will play everything in HDR bleaching out the picture when really playing SDR content. This is hard on the display. And will shorten the life of the TV. If you select 4K SDR and match content it will work properly and play HDR content when available.

Thank you jus got one yesterday

Apple is now beginning use 5.1 Dolby Audio on various albums. Set the CHANGE FORMAT to DD, then to quickly to STEREO, then back to DD to allow receiver to playback in 5.1Suround music instead of 2.0 stereo.

Thank you VillaMan and comments. I’m good to go 👍🏼

Very helpful and informative. Thank you!

Hi I connected the Apple TV to my LG C9 I’m getting Dolby atmos DD+ but when I play Netflix in SDR I’m not getting DD+ I wonder why, do you think I should connect to my AV Marantz processor ?

If you’re only seeing 4:2:2 Chroma, the device is only outputting 4K@60fps in HDR (TMDS as opposed to FRL) meaning the HDMI 2.1 is only running as a HDMI 2.0 (18Gbps).

@almanac520

Жыл бұрын

there is hardly any media that is anything other than 4:2:0

Good video, just one point best setting for video should be 4K SDR 60 and HDMI OUTPUT Set toRGB high with match range and frame rate on for both options. If you leave it on 4K HDR all the time it outputs the Apple TV Home Screen in hdr all the time which is Not ideal if your running a OLED. Thanks 🙏

@AlmightyKingNitti

Жыл бұрын

is this info still relevant today?

@almanac520

Жыл бұрын

@@AlmightyKingNitti depends on your TV/monitor, and the quality of HDR it has. Optimistically, you should have HDR on and the highest fps for the best experience.... why not? Wear on your TV shouldn't drive your usage of it.

Awesome video✊🏻✊🏻✊🏻🙏

Very helpful video - thank you. I'm curious why my Apple TV 4k 2021 has different video settings to yours (it only has three options under "Video", rather than the five options you have - see 2:31). In particular, it doesn't have the "Match Content" option, which is rather disappointing. I do have a (much) older TV - would that explain it? If I had a 4k TV, would those options appear on Apple TV Settings?

@rafikz77

2 жыл бұрын

yes you are correct

So my TCL supports Dolby Vision 4k so I should select that correct?

Hay my friend i have question Is there any modification from last one coz there is no easy way to send my files from I phone to Apple TV and I can’t see my videos party in Apple TV 😂only or show my pictures there

Great Video Salute

Brother, I bought the same device in 4k sdr mode and even though the content matches are open, when KZread hdr video is open, the system does not pass hdr, so the hdr active symbol does not appear on the TV, normally in this setting, sdr broadcasts sdr hdr broadcasts are watched as hdr. this time it shows the sdr broadcasts as pale and matte. I'm not sure if this is a software problem. I couldn't solve it.

Hey mate, my AVR supports HDR but projector doesn't. So I've set mine to 4K SDR. I'm not able to see the chroma option. I have another option called "HDMI output". It has YCbCr, RGB High, RGB Low. Any idea which one is best?

@samfalconi

2 жыл бұрын

yeah I’m on a 1080p epson projector.. I see the same and had the same question: YVbCr, RGB high, or RGB low. Wish I could resolve the question myself

What hdmi cable do you use?

What Runs Apps More Smoothly And Faster And Better Quality The Newest Apple Tv 4k Or The Neo Qn90a Tizen Ui 🤔???

@tHAvIlLaMaN

2 жыл бұрын

The QN90A has some hiccups in the UI sometimes. The new Apple TV is definitely faster

Very nice informative video for people that didn't know the exact necessary setup! The new Apple TV will support 120Hz in the near future, only via 2.1 HDMI cable + devices. You should always select the TV resolution in SDR 60Hz as a base setting and HDMI-output to YCbCr (RBG Low and High are for monitor setups and not TV's in general). Then you should also be able to to select chroma 4:4:4, if the base resolution is set as 4K SDR 60Hz. The chroma will adapt to the nearest compatible format depending on the content you choose to play.

@theredon2

3 жыл бұрын

That’s right, that’s how I have mine for my projector.

@bigreg1001

3 жыл бұрын

That’s exactly what I was going to tell him

@tusch

3 жыл бұрын

Could you mention why set it to 4k SDR 60Hz? A lot of folks recommend this, but the benefits I've seen vary quite a lot. From Vincent's video, he seems to indicate that it's so it is not so bright in the ATV home screen. But others point out that doing that, you won't get the screensavers in DolbyVision. It seems to me that if Match Content --Range and Frame Rate are on, then it shouldn't matter what format it's set on. Is there any other benefit other than the home screen in ATV?

@StrikerXL_BE

3 жыл бұрын

@@tusch It's very simple 4K SDR 60Hz is good base to start with. 4K because it wil give the best resolution / crispness and SDR because it wil give you the correct colors (important) for the menu and will also strain the display WAY less than HDR does (Dolby Vision isn't even suited for the usage of the menu at all) and last but not least 60Hz cause the menu will be at it's smoothest while navigating your apps for content. (also for gaming if that is your thing) In the not so far past when you forced Dolby Vision on the Apple TV it's content like for example on KZread will apply it to the videos which are not mastered in this format (or even in HDR for that matter). If the app and video support the higher format it will match the content and frame rate if they are trigger on in the settings. Hope this helps!

@jessemorales146

2 жыл бұрын

Thank you for this comment, idk why he didn’t go over this.

Does it go sleep mode or something if not in use.

I have a apple 4k to switch out my hideous Nvidia tube with but I am too lazy to do it. I also have a 2nd Gen fire cube standing by. I love the cube this is my third, but it just has too many issues to be the primary streamer so it'll just a backup.

So I have the latest Apple TV and Chroma IS NOT THERE! It’s not on the menu at all. Is this because I have DolbyVision? Also, I’m confused about ATMOS. I have an excellent A/V receiver. I have a 7.1 system. 2 front, 2 side, 2 rear, center and sub. However, I DO NOT have speakers in the ceiling (I would if I could haha). I thought ATMOS was ONLY good if you had overhead speakers. I do think setting my Apple TV “audio format” to off (which automatically sets the audio to ATMOS) sound better than “on” which sends a 5.1 signal. But I thought ATMOS means ceiling speakers. If you get this please let me know. Thanks for the video. My system is: Sony 82” OLED, Denon X4700, 2 Definitive center speakers (piggy backed) Martin Logan Motion 60i front, Mirage OS3 sides, Definitive 6-Way rears and Velodyne 12BG sub. I used to have all Martin Logan electrostatic panel speakers but the panel (stators) go bad and it’s over 1000 dollar every 5-7 years for a pair…and I had 3 pairs! Got tired of paying that. I have a small but punchy system. Thanks man.

Should I connect my Apple TV hdmi 2.1 cable to my TV or soundbar? Both my soundbar and tv are connected via the e-arc.

@tHAvIlLaMaN

Жыл бұрын

To either one that has an available port. It’s not a big deal either way

Match content and match frame throws off sound sync for me, so the lips don't match the sound. I am running through a projector and receiver though.

Great video, thanks. I actually have a Roku Ultra but watch shows through the Apple TV app. Do these settings apply to the app also or just the Apple TV box?

@tHAvIlLaMaN

3 жыл бұрын

Just the box

Hi VillaMan. I have a question. Does Match Frame Rate work with all applications or just Apple TV+ app? For example: Netflix, Prime Video, Disney+? I have Amazon Fire TV Cube and Auto Framerate only works on Prime contents. The contents of the rest of the application, Cube play at 60Hz :(

@tHAvIlLaMaN

2 жыл бұрын

Hey! On the Apple TV it works with all the apps

@robertgwiazdowski8186

2 жыл бұрын

@@tHAvIlLaMaN Thanks for info :)

Very helpful! Just got the new Apple TV for Christmas and this will save me a LOT of time! Thank you!

I have an Apple TV 4K and a Dolby Atmos soundbar. I don’t see Dolby Atmos under the default audio output. Is this because I don’t have Earc or my older Samsung Tv doesn’t support Dolby Atmos?

I have an Nvidia Shield and I'm thinking about switching over to apple. Is it OK that I don't own any apple products?

if Im using Sony TV suporting dolby atmos & visions, does it still worth to buy the apple tv 4k? like using for Netflix, youtube only

@chit5842

8 ай бұрын

Fake account?

Can u review QN900a and LG Qned 8k?

Using my sony A95L with latest apple 4k tv my dolby vision is still dark. Any suggestions for chroma or the match content range and frame or just range.. do I keep on rgb high or that ybc setting. I don't understand all my hdmi settings on my tv is on enhanced , i'm using the proper 2.1 cables in the correct ports. Heard its a sony thing with hdr.. was told to keep in sdr 4k but feel like I lose hdr. So enable ir not. So frustrating. Please help thanx in advance Mike

Thank you sir!

It’s supports all hdmi 2.1 features. 2.1 is not enabled yet.

Amazing thank you

I have an Apple HD TV with the NEW 2021 Remote. I can not find a way to completely have the remote turn off my Samsung Series 7 TV. When I hit the power button it put the Apple TV box in sleep mode and then it acts like it is powering off the TV, but within 10 seconds the TV comes back on. Then I have to use the TV remote to turn it off. I am trying to just use the Apple Remote. Do you have any ideals.

what do you miss out on if you hook apple 4k tv to a hdmi 2.0 and not 2.1…i use my xbox s and dolby atmos sound bar on the 2 hdmi2.1 …the other 2 are 2.0

@derekbusse2922

Жыл бұрын

I am doing something similar with my series x. I have a nano85. But when I go to my apple tv video format, the highest it goes is 1080p hdr,60 hz

I connect my Apple TV 4K to an Arcane HD Fury but Immersive Audio is not an option on my Apple TV. Any clues?

the angle of the tv is rough, my man. cheers from nova scotia :)

Hi! Please clarify the following problem. I have a sony 4k 2021 tv with android tv and all the streaming applications...netflix, hbo max, etc. The TV is able to play dolby vision, hdr10, airplay2, has an earc output, etc I have an iPhone, I use Apple Music and iCloud. My question is: Does it bring me something extra if I add this apple tv 4k product to my ecosystem. Will the quality of the video image on netflix/hbo max be better than that in the TV application? Is it worth spending $200, and if so, what does it offer me in addition? Thank you in advance!

@knewy

Жыл бұрын

.. i'm new to apple tv also and never saw the point of it but i got one finally because i needed a certain streaming service that was not on my tv (LG) .. benefits for me at least are convenience.. the sports streaming app i wanted (Fubo) is on it, it has Criterion which I watch a lot and I find the picture to be smoother, it used to stutter a bit on my mac output with hdmi. Lots of other streaming services like Arrow Video etc. Another advantage is you can easily connect more than 1 pair of apple or beats headphones via bluetooth meaning my partner and i can watch movies together when the kid goes to bed. So it's a bit more convenience and luxury than hunching over equipment and messing around with cables trying to get things set up. Wish I'd bought one from apples refurb store though.. the unit is completely a sealed box so may as well just get a refurb one from apple and save $40. One other thing.. 4k movies are quite reasonable to buy from apple, and for each you can set the sound to lower dynamic range which is quieter when it is late, all those little conveniences add up basically so it's made it a worthwhile purchase in our case :)

I can't find Netflix settings on this apple 4k,and I can't get 60hz when I'm in the menu it says 50hz when I play a movie on Netflix it's 24hz,and I did the 2.2.2 Croma,I do get get Dolby vision picture and Dolby Atmos sound

have the Apple TV 4K 2022?im currently using fools dynamic hdr settings for hdr from Avs forums,and wana use my own filmmaker mode sdr settings for sdr,when coming from a hdr video to sdr it stays on dynamic sdr and doesn’t go to my filmmaker automatically,iv set it to match content,iv Tryed it off and on and still doesn’t work,never saves my picture settings for sdr,always have to reset,do you no anything about this?

Thanks for the top tips - would advise just a voice over for future vids though as all of the settings are on the right of your TV and your camera is on the left - Front on or Camera at the right would have been an easier watch 👍😊

i have samsung qn90a Tv and samsung hw q900a soun bar, so where should connect apple tv 4k to? Thanks