Thanks for breaking everything down slowly in laymens term. Very helpful! 😎

Mot Sure if you read these, Jordy, but don’t discredit yourself. You do an amazing job. This video is the best one for explaining the sprocket, the bar and the gauge. Thank you.

@CarvingFusion

3 ай бұрын

Thank you

I suffered a TBI and had both arms ripped off at the elbows, then reattached…(that shit left a mark!)…. I began power carving and making wooden flags and concealed firearm cabinets I bought an echo cs 490 a year ago to cut firewood….but I’m getting into carving now…. And Brother, you and I are cut from the same politically incorrect cloth! Fuckin’ love it! Subscribed!

@CarvingFusion

Жыл бұрын

Awesome thank you and take care of those arms!

First off, i think you are a little hard on yourself. Most importantly, watching some other carvers i wish they would have made a video just like yours. I'm grateful you took the time to explain this! After wanting to get into this and listening to others without explaining like you did here, i was so lost. THANK YOU!

Everything on point bro. I also suggest the 170 for a beginner. Good, cheap, light weight saw. That way you don’t invest too much in case you don’t like it.

Thumbs up man, much admiration. Have to pick up the grand kid and have to leave but will catch more later. Just starting and it is useful. I'm 68 so yeah, thanks.

Thanks Jordy! This video really helped me as beginner! I asked my local shop for a Stihl 140 model to be mounted with the dime nose carving guide and 1/4 inch chain and they told me the sprocket is different compared to other models that take a carving bar (i.e. the 200 model that comes with a carving bar) and that it can't be done. Didn't seem right to me since the sprockets might have more or less teeth but they are both for 1/4 inch chains and 0.043 inch driver link gauge bars. Did my research and verified this through specs from online and your video really confirmed my hunch that the shop employee had it wrong! Great video here Jordy! Many thanks :)

@CarvingFusion

Жыл бұрын

Yup the sprokets on the 140 a 1/4 pitch yup! :)

Perfect timing on this video! You've got me to the point that I'm ready to delve into chainsaw carving and hopefully carve a bunny bear monkey whale spirit .

@CarvingFusion

3 жыл бұрын

Haaha lol

😄😄😄... I'm sorry...but when you started professing your love... "I love you so much"...I thought you were having a tender moment with your viewers..😯...then I realized you were talking to your tools !..😄😄😄... You crack me up..👍😘...🌿🌿🌿

@lizakin1274

3 жыл бұрын

Lol, right? He's great.

Thanks Jordy, well done, you brought to light several things I never thought about regarding chainsaw carving. I may need to start smaller with equipment starting off. Thank you again for being you.

Well done Jordy !...you did fine...no-one can accuse you of talking down to them...you own your understanding and offer it freely to those who need more information...you always impress me with your tutoring for your subscribers... Bless you Jordy...🌿🌿🌿

@CarvingFusion

3 жыл бұрын

Ty

Well Jordy you got me into dermal carving now you got me started on chainsaw carving, thanks a lot brother and I do mean thanks. Just love it.

Always helpful Jordy👍great video👍

Thank you for the video. Very informative and well done. Have a blessed life

@CarvingFusion

2 жыл бұрын

Thank you tom

Nice video Jordy. I think you did a good job explaining the sizes and stuff 👍🏻

@CarvingFusion

3 жыл бұрын

Thanks kyle

Great informative video dude, I understood everything you explained, you did a wicked job bro.

Very informative video. Thanks Jordy.

A lot of helpful info for us just starting out, great job Jordy.

Hi Jordy You are not a dummy! - You are a smart guy!!! 👍👍👍 And believe me ... I talk often to myself and sometimes I get an answer too ... 🤣🤣🤣👍👍👍 Thanks for showing

Thanks for the education Jordy. I'm retired and looking into carving small to medium size: bears, owls, eagles, or squirrels. Thanks a bunch for your informative video. I like watching Ryan Cook too.

@CarvingFusion

Жыл бұрын

Awesome thank you too

thanks Jordy ...Wow what an unbelievable great job you did on explaining this technical stuff, that has been confusing to a lot of us . Man you are getting better all the time at doing this kind of informational video . thank you Jordy for having the patients to do this for us !

Jordy,thanks so much for this video!I appreciate it immensely,it’s exactly what I needed!BTW you did a great teaching job!

Hi Jordy. Thanks for this video. Well explained and you are no Dummy Thanks again.

Great video, cleared alot of stuff up for me!

Jordy you explained very good!

Thanks from NZ Jordy, I get you and like your approach, you’ve helped a lot,I’m moving into chainsaws from chisels and will take all your advice

A load of well explained information 👍👍

Well explained Jordy 👍 love your videos .

excellent. thanks

Best explanation!! Now I know what to get!! Thank you so much for taking the time to help the beginner :)

@CarvingFusion

3 жыл бұрын

:)

A lot of information but easily understood. I know what to watch for now. My dad was a wood cutter and I grew up around that stuff but I only cut stove length wood. I just bought a yard sale homelite 42cc 14 inch bar to start farting around with.

this helped me very much thank you

Great mate u do explain everything and I like when u repeat everything so I can get it myself

Hey Jordy... very good explaining!!! Here in Germany you can buy the Echo with the Carvingbar. I think 12inch?? (30cm). Its called 2511wesc... i started with the ms170 and a cheap carvingbar. I did maybe 7-8 sculptures and the Tip of the bar now sucks (enough chainoil and loosin chain of course). For the beginning it was nice. On my ms150 i got a 8“ Cannonbar.... the best. My Grandpa said: „for cheap tools we are too poor“. You re great... a Man with a big heart !!!

Good job Thanks

Excellent video explained very well jordy 👌👌👌👌💯💥👽🗡⚒🌏

hi jordy great video i could never work that out .thanks for the info. stay safe.

Now I know what I need 👍😀🏴󠁧󠁢󠁳󠁣󠁴󠁿

Great info

Thanks for the info on chainsaws. Found it very interesting.... Keep safe

Better than I could do explaining! 😂

I feel this... i have the same problem with this but yesterday comes my echo 2511 with the carving bar. I'm so excited how good it works Thanks for all the good videos

@williamfritsch4699

Жыл бұрын

need a quarter inch sprocket for my echo can you tell me where to get one, thanks

@r6taz597

Жыл бұрын

@williamfritsch4699 my comes with the sprocket pre-installed... it was the 2511 wes direkt with the carving bar from echo... sorry I Hobe it helps

@williamfritsch4699

Жыл бұрын

@@r6taz597 thanks for responding! was able to purchase sprocket off of EBAY can't wait to get started.

Good information. I need to do some cleaning.

It helped alot Jordy

Great vid bud I got some insight 👍I'm going with he .43

Thanks for the video Jordy. Stihl 170's are less than $180 usd at my local Theissen's store,so I bought two. Ordered a 12" cannon carver 1/4 tip kit for one of them and it's supposed to be delivered today. I've been using the stock bar thus far with decent results.

@CarvingFusion

2 жыл бұрын

Ty, make sure u put the 1/4 sproket on the saw for the bar as well (if you did not know)

@jeffsartadventure3634

2 жыл бұрын

@@CarvingFusion ,yessir just watched your video to help me out. The kit came yesterday and it ended being a 12" dime tip,which was what I wanted to begin with,but all they had listed was the 1/4 tip haha. Gonna put together this morning.

I worked in the woods logging for a long time when I was younger . You did a great job explaining everything but bud .

@CarvingFusion

3 жыл бұрын

Ty

Well done, i was contemplating putting a carving bar on a nice ms200t, ???, as i have a bigger husky for blocking if needed, thought now is go with the battery saw, or that smaller 170, i were ear plugs but hate the noise, your opinion is most valued. Carry on

@CarvingFusion

4 ай бұрын

Yup carvi g bar go on 200t but u may need to put 1/4 sproket on it

@milwaukeejay

4 ай бұрын

Yep, may have to much power an burn up bars needlessly if I understood ur vid.

Thank you Jordy for this vid. I'm sure I will have lots of questions for you. Lol

Thanks Jordy ..

What up bud? Have u seen the video "chainsaw art" by Gus Johnson? Its only a 12 sec. video but for some reason it cracks me up...its worth watching!...U da man Jordy!

Great timing for the video Jordy and lucky me, i chose the right saw! Its not got a carving bar but i thought i'd get used to it first and do basic cuts for now and if i like it i'd eventually get a smaller saw with a carving bar, sound reasonable to you? Thanks for explaining, this crap with numbers is not for me either!

@CarvingFusion

3 жыл бұрын

Yup good start

@clairetolmie5640

3 жыл бұрын

Thanks Jordy

Thank you for this excellent tutorial video. I need some help here. I just got my carving bar and chain. But I am not sure if the sprocket (it is 1/4 inch) I got is okay because the supplier marked it as MST 150. Can it fit my ms170? I am eager to start sir.

@CarvingFusion

2 ай бұрын

U need to put a 1/4 pitch sproket in the ms 170,

Hey Jordy….I want to add a light weight dime tip electric/corded detail saw to my shop. Like you the number/model/confusion stuff drives me nuts. I’m looking at the Mikita corded saw, or the sthil, possibly an Oregon electric? None of them appear to be set up for detail carving….so I will need to mess with the numbers and all the choices. Any specific recommendations? Thanks, by the way this video one’s help, even someone like me who has sucked too much 2 stroke smoke!!!!

@CarvingFusion

2 жыл бұрын

I would go to ur local choansaw dealer and see what electric saws take a 1/4 pitch sproket

What site do you use to order a 1/4 pitch sprocket for the echo..? I bought one to carve but absolutely zero luck on finding a sprocket…

@CarvingFusion

Жыл бұрын

Hmmmm depends where you are located

Nice video, but where are your links below? You always seem to forget! Thanks.

@CarvingFusion

3 жыл бұрын

I just shared link now sorry

@jayc3110

3 жыл бұрын

​@@CarvingFusion Thank you Jordy, i like your videos and appreciate your efforts in making them.

Jordie im getting a ms 193c dose the sprocket as long as it’s 1/4 pitch dose the number of teeth mater? and do you have to change the clutch or will old clutch work I ask because a lot of kits come with both and some dont

@CarvingFusion

Жыл бұрын

U want the kit that has the 1/4, u can put on a 1/4 bar and chain and start carving

@derrickcarlton2887

Жыл бұрын

@@CarvingFusion so it’s all pretty universal from saw to saw then I guess. sweet thank so so much can’t thank you enough for all you do for all of us 🙏

@CarvingFusion

Жыл бұрын

@derrickcarlton2887 yes just make sure the saw comes witg a 1/4 sproket and ur good to go

My ms193 came with 1/4 pitch bar

@CarvingFusion

2 жыл бұрын

Lucky you