Smaller saws tend to have higher chain speed for example the husqvarna 346xp has a free rev speed of 16,500 rpm and the 395xp has one of only 12,000 rpm. But the larger saws have more torque so are faster in larger wood. CCs are not a great show of cut speed because it depends on species of wood. You also run into issues with chain pitch, for example my husky 540XP Mk3 is setup for 1/4 pitch, 346xp .325, 266 3/4 and 390 for .404 pitch. So there’s tons of factors great video as always though ❤

@chainsawjenna

3 ай бұрын

Yeah you’re right there are ton of factors that go into it. These test are definitely not scientific 😂😂😂😂mostly just of fun

@ToddAdams1234

3 ай бұрын

@@chainsawjennaTHE most important thing is a SHARP CHAIN!!!

If they all had equal bars and chains you would actually see the difference in cc.

@banjoman6223

3 ай бұрын

Exactly

Where did you get the ratcheting chainsaw wrench?

Never knew chainsaw KZread was a thing and that a tiny cute brunette was wielding chainsaws like a claymore to fill the niche. I got forced to learn how to operate a chainsaw as a kid by my dad, like a literal child, he would force me to cut stumps and saplings while he screamed at me to stop crying, I wasn't strong enough to crank it. So I don't have the love of chainsaw she has but it has been a great skill to have living in hurricane country.

Well you know jenna.i never thought about testing chain saws against each other. This is why i like your videos... always something different in each one . BANJO. enjoyed himself. Did you ever figure out what he was digging for.. keep you videos coming. I enjoy watching them. You..Ben..and banjo make the videos intreresting 😊

The cut speed depends on at least these things: 1 chain speed during cut (this is dependent on the available torque, length of bar, type of wood, downward pressure, raker setting, chain tooth sharpness), chain type and size, etc) 2. Dynamic chip clearance (dependent on most of the above) 3. Pressure perpendicular to the cut (dependent on saw weight, operator actions) It's difficult to compare cut speed straight up because saws with different properties can be operated differently to obtain similar results. Small saws for instance, often run smaller width (gauge) chain, which makes a dramatic difference in cut speed because the kerf is so much smaller. The widest standard drive link gauge (.063) is about 50% larger than the most narrow (.043). Since the cutting tooth and therefore the kerf width is generally proportional to the drive link width ( this is what fits in the bar slot) it takes more power to cut with wider chain. Going from smallest to largest might take 50% more power or 50% more displacement (say from a 40 cc to 60 cc). Obviously that is an over simplification due to all the other factors. As a result, picking the largest displacement saw made for a chosen chain gauge often results in the potential for faster cuts.

Oh my God, your Dog is cute. When i think how little he was as you took him at home. :)

Very original

Sharpening change a lot Reaker depth Rpm Torc...

@chainsawjenna

3 ай бұрын

Yeah there’s a lot of factors that go into it 😅😅

The only way to be certain of an accurate comparison test is to have Matched Chains. All the same type - Full, Semi, etc. and all to the same fresh sharpness. * Next in importance is Saw Tuning and Maximum sustainable RPM in the wood.

The pink saw is the slowest &the hardest for you to startup lot training jenna for you

HP says what it can do ,Torque says what it wiil do. Smaller cc engines have smaller piston weight and higher rpm than larger cc engines with heaver weight pistons .

Banjo is growing quickly.

On the small end -60cc bigger is faster, on the high end the larger saws in small wood is slower, for example my 044 72cc is faster than a 066 92cc because the 066 has less chain speed but more torque

❤❤❤❤😊

Cold start up video with pink saw when its not running a month you struggle jenna😂😂😂😂😂😂😂😂😂😂😂😂

I dont know what kind of saw the pink one is, but its the slowest 60cc i have seen. You should compare with a MS-362. A pro-model that revs like a deamon. I have a 362 with Tsumura Light 16" and full chisel chain and it cuts twice as fast as the pink saw.

@bobsyouruncle8052

Ай бұрын

and i have a dolmar that makes a stihl look like a poulan

It's like car engines, most inline sixes have more torque than a v8 of equal or larger cubic inch.Stihl and Husquavarna have tons of torque.Great comparison.

@chainsawjenna

3 ай бұрын

Thank you Jason! These are so fun to compare 😁

Sou seu fã brasileiro ❤🇧🇷

@chainsawjenna

3 ай бұрын

Hello!! Thank you for watching!😁😁

The Pinkway is not actually 63cc, it is 54.6cc.

Puppy getting big!❤❤

@chainsawjenna

3 ай бұрын

Ikkkkkkk

Not bad

@chainsawjenna

3 ай бұрын

Thank you 😊

Pinkway Manual suggests operator’s wear yoga pants while operating.

Your test is flawed, as is your assumptions about CCs

Did this test stimulate Banjo to poop 💩 in the woods ? Inquiring minds want to know 😂

@chainsawjenna

3 ай бұрын

Lol I think he just had to much excitement to hold it in. 😅

@HawkesVids

3 ай бұрын

@@chainsawjenna I know that feeling ! Same issue when I'm fixin to head to Wally World ! 💩🤪

If starting a saw is 'like a math problem', then this probably goes some way towards explaning your difficulty. 😂🤣😂

@chainsawjenna

3 ай бұрын

You try starting that Chinese saw then. 😂😂😂

@jimbenge9649

3 ай бұрын

😂😂😂You've got me there.@@chainsawjenna 😘 By the way, love that dog.

Because pinkway is Chinese junk and 241 is Stihl... End of story... Neeeext pleeeease...

@chainsawjenna

3 ай бұрын

😂😂😂😂😂😂😂

@REDLINERUNNER

3 ай бұрын

@@chainsawjenna My MS311 is faster than all these saws and it's 59cc 4,2hp

@lordbaby100

3 ай бұрын

the holzfforma saws are also chines saws and the g372 is even with the 372xp in power, may not in durability and reliability but the g372 cost only 1/4 from the 372xp. If you swap some parts like the carb you have a good saw almost like the real one put you paid only less than the half for it. And the cheaper Stihl saws are also produced in China only the high end ones are still produced in Germany

@REDLINERUNNER

3 ай бұрын

@@lordbaby100 I know. I tested once a brand new MS230 and compared it to my MS230 made in Germany in 2005. Mine still has much more compression, more power and it's slightly heavier than MS230 made in CHN in 2020. Can you believe that??

@spadesofaces1980

3 ай бұрын

The way she holds her saws baffles me. Like she's doing it backwards or something. Oh yeah. She's a lefty.😂😂😂 But seriously. Your forward arm should be straighter so that it will trip the brake during a kickback. Keep up the good work.