Thanks Jeremy that definitely makes life easier to get your hands on one of those. I wish they weren’t so expensive for what they do but probably gonna buy one. Lol thanks buddy.👍😊🏎️🏎️🏎️
@mp30322 ай бұрын
Great 👍 video 📹 Jeremy my first time seeing your page. Thanks for showing the power source also.
@davidherber423311 ай бұрын
Great vid, thank you for the tips on the truer!
@SlotCar2021 Жыл бұрын
I always found my proses truer worked well. Obviously a proper truer is the best, looks great 👍 You have to glue tyres, use a precision caliper to check the diameter. You then need to take the shoulders off and then condition the tyres if needed. You have to aim for a thin running strip that the tyre will run on. On home tracks unless you have a long straight tyre ballooning might not happen so this is less relevant. On club tracks where cars are running near flat out this is key. I know people that just use a flat piece of material and different grades of sandpaper. The material has to be flat though no use using a track piece. I know people that just use thos method and are very fast, obviously there are lots of other things to set up on a car that makes it fast like motor pod, car balance, independent wheels, wheels themselves, car weight etc.
@bradsanders6954 Жыл бұрын
Thanks! Audio was fine. I run a lot of super slick silicone tires, almost all fit the rims well and have a flat profile. I dont know about trueing them if they dont have a flat profile, might take a long time on the truer?
@garageofslotcars
Жыл бұрын
I dont use silicone, but what i have read is they usually do not need to be trued. If they do i read you have to go very slow and use a very fine grit
@ajgiov Жыл бұрын
Have you thought about having a spare axle just connected to the tire truer with wheels and bushings and just putting different sets of tires on the premade set up to true them. I want to get a tire truer but I’m not sure how often I would need to be popping the back axle assembly’s out and putting on this machine. It would be easier to just pop the tires off and put them on a pre-existing set up on the truer. What are your thoughts?
@garageofslotcars
Жыл бұрын
Carrera cars use different size tires and wheels for various cars,
@MorbidOW2 Жыл бұрын
nice door
@philipsoucie3015 Жыл бұрын
Should we do the rims first to smooth them out before taking so much off the tires.
@garageofslotcars
Жыл бұрын
If you are a perfectionist, yes you should do the wheels first and glue on the tires
Пікірлер: 13
Great Video - Thank you!
Thanks Jeremy that definitely makes life easier to get your hands on one of those. I wish they weren’t so expensive for what they do but probably gonna buy one. Lol thanks buddy.👍😊🏎️🏎️🏎️
Great 👍 video 📹 Jeremy my first time seeing your page. Thanks for showing the power source also.
Great vid, thank you for the tips on the truer!
I always found my proses truer worked well. Obviously a proper truer is the best, looks great 👍 You have to glue tyres, use a precision caliper to check the diameter. You then need to take the shoulders off and then condition the tyres if needed. You have to aim for a thin running strip that the tyre will run on. On home tracks unless you have a long straight tyre ballooning might not happen so this is less relevant. On club tracks where cars are running near flat out this is key. I know people that just use a flat piece of material and different grades of sandpaper. The material has to be flat though no use using a track piece. I know people that just use thos method and are very fast, obviously there are lots of other things to set up on a car that makes it fast like motor pod, car balance, independent wheels, wheels themselves, car weight etc.
Thanks! Audio was fine. I run a lot of super slick silicone tires, almost all fit the rims well and have a flat profile. I dont know about trueing them if they dont have a flat profile, might take a long time on the truer?
@garageofslotcars
Жыл бұрын
I dont use silicone, but what i have read is they usually do not need to be trued. If they do i read you have to go very slow and use a very fine grit
Have you thought about having a spare axle just connected to the tire truer with wheels and bushings and just putting different sets of tires on the premade set up to true them. I want to get a tire truer but I’m not sure how often I would need to be popping the back axle assembly’s out and putting on this machine. It would be easier to just pop the tires off and put them on a pre-existing set up on the truer. What are your thoughts?
@garageofslotcars
Жыл бұрын
Carrera cars use different size tires and wheels for various cars,
nice door
Should we do the rims first to smooth them out before taking so much off the tires.
@garageofslotcars
Жыл бұрын
If you are a perfectionist, yes you should do the wheels first and glue on the tires
@philipsoucie3015
Жыл бұрын
@@garageofslotcars Just competitive. Thanks.