🔴 *CFMOTO ZForce Side X Side Maintenance and Repairs* kzread.info/head/PL81Cr2jsFWsUDzGRRt6WAm9p-V87jkvlV

I'll have to re-watch your 800 oil change, I'm almost ready

Nice easy access for a service. 👍I built a set of wooden platforms out of 2x6 as a base for truck ramps . One under each wheel. Good solid base and gives me lots of room for using a creeper under the machine with no worries of it falling. Saves the back and knees. Also easy to store when not needed.

@FANATICALSIDERIDER

Жыл бұрын

Yes that's great!

Thanks Roland. Your timing on this video couldn't be better! Lol. I'll re-watch it in a few weeks. 👍

@FANATICALSIDERIDER

Жыл бұрын

You're welcome Ben!

Great video, I was kind of annoyed when taking the filter off and the oil making a mess. It was suggested using some sheet plastic like from a folder and us that it funnel the oil away. Perhaps next change I will try it.

You need to pull the cvt cover off blow out your clutch. They take in a lot of dust!👍

What weight oil and how much ?

Hey there. We would like to know the best way and products to clean the front and back windows. We have the same machine as you after your video on cf moto compares to other models Thanks so much Brian

@FANATICALSIDERIDER

3 ай бұрын

I only wash with water and soap. On the trail I bring a water bottle with a hand pump

Thank - You for more great CFMOTO content. How do we take part in the “ Mid-Week Rides” Got a new 950 & our trail system doesn’t open until May 15th. Be Well and Happy CFMOTOING.

@FANATICALSIDERIDER

Жыл бұрын

Mike you can keep up with rides on the PTBO Trails ATV Club Facebook page

@motomike2273

Жыл бұрын

Thank-You Roland , Be Well

I just finished changing mine at 198 miles. No crush ring. I shined a flash light, and didn't see one. Then I took a picture to make sure. It has one now though

@FANATICALSIDERIDER

6 ай бұрын

Did it leak?

Question? I just purchased 2022 950 sport. How do I access the tool kit and funnel under the drivers seat? For the life of me I can’t figure out how to remove or get under the seat. Thanks.

@FANATICALSIDERIDER

Жыл бұрын

The drivers seat has 4 bolts that must be removed. My tool kit was in the glove box and the funnel is under the hood

@cfladrow

Жыл бұрын

Thanks so much, mine are under the seat but I will get them and find a better place to store them.

I have the same machine, and almost complete with my break in period. I need to adjust my shifter linkage, as it jumped out of high and did a brief grinding noise when I started to move. I stoped, walked around and inspected the machine, then when I put it back in gear everything was normal. My question is: what is the procedure to get at and adjust the shifter linkage in the 2023 CFMoto 950 HO EX?. TIA

@FANATICALSIDERIDER

Жыл бұрын

Never done it yet but I read someone took the passenger side panel off the middle console to access the shifter linkage.

@623powwa

Жыл бұрын

@@FANATICALSIDERIDER Thank you!

When you check the oil level do you screw your dip stick all the way in or not i have an 800 zforce g2 2023 and the manuele says not to screw it in all the way kind of confused

@FANATICALSIDERIDER

Жыл бұрын

I've been told not to. Kinda silly isn't it

@richhahn7852

Жыл бұрын

Allegedly you just stick it in and don’t screw it down as per the information I got

Do they really expect you to change the crush ring each time you change the oil? Oh, and I now have 70 miles on my new Zforce 950 Ho. Quite happy with it so for. Except for one thing. I can’t find a wiring diagram for it anywhere. Do you have any idea where I can get my hands on one?

@FANATICALSIDERIDER

Жыл бұрын

I mean if it's not over used I think the crush ring can be reused. But if you have a new ring, why not use it. I don't know where you can find a wiring diagram.

Where did you order the kit at. .?

@FANATICALSIDERIDER

Жыл бұрын

I bought it at the cfmoto dealer I bought my sxs from

You want to come do mine lol.

@FANATICALSIDERIDER

Жыл бұрын

I could if you bring it over. I get to drive it though. LOL

Looks like CFMOTO uses the same oil filter in pretty much all of their machines. Simple that just 1 of the things that make this brand stand out from the rest.

@FANATICALSIDERIDER

Жыл бұрын

Agreed 👍

@BlettzaHrekleW

Жыл бұрын

Yep same oil filter in all their models from a 400 to 1000cc. They all have the same Primary now to and all same Secondary Clutch. Secondary clutches have been same but now the Primaries are as well , just a difference in the Spring and weight on Primary now. Mid last year they made the Z800 that way even , it was always wet clutch , now it's Dry like the rest. Even the Rocker arm assemblies on Heads of the 500 are same as the Z800 up to 2021 , after that I'm not 100% sure without checking part numbers