Handy little tool, and the procedures to make it are relevant to other projects too. Good job, John.
@doubleboost
10 жыл бұрын
It is a good tool to make Good practice for drilling holes John
@Godshole10 жыл бұрын
Cheers John for all the entertaining and educational filems and the time you take to produce them. Between you, Keith, Abomb and the gang you keep me sane! All the best to you and yours for 2014.
@doubleboost
10 жыл бұрын
Thanks for the kind words Best John
@wbmphd10 жыл бұрын
John: Your wife is a good sport to get you the shirt! Please thank "Mrs. Doubleboost" for all of us. I hope you had a merry Christmas and have a happy new year! Bruce.
@doubleboost
10 жыл бұрын
Hi Bruce "Mrs Doubleboost" is a very good sport Regards John
@voidmansions10 жыл бұрын
Hi John. Very useful tool indeed. Everybody is likely to make one now! You're right about a heavier machine making climb milling possible. I actually rely on the weight of the bridgeport table to allow me to get a better final finish by climb milling.
@doubleboost
10 жыл бұрын
You can not beat a heavy solid machine Regards John
@BigMjolnir10 жыл бұрын
I've seen those with the middle hole sized for a pencil or marker...lets you draw a centerline down the length of the workpiece. I'm also thinking a v-groove along the top would be useful for finding the center on round bars...just use it upside down. Hmmmm...magnetic dowel pins so it hangs on by itself? Ok, I'll stop! LOL! -- Mike
@panepuccrex10 жыл бұрын
As a wood worker we used something like this with a router to find the center of a board on edge
@Travisfromoregon10 жыл бұрын
Absolutely love the out takes !!!
@metaling110 жыл бұрын
Great video John. Will have to make one.
@w05600756810 жыл бұрын
Nice work and a really useful piece of kit
@not2fast4u2c10 жыл бұрын
That will be a handy tool .And could be modified for other uses Have a Happy New Year
@DrMerkwurdig10 жыл бұрын
That's a handy tool to have! Thanks for showing!
@JohnPlant9010 жыл бұрын
Climb milling offers longer cutter life and better finish - but the machine needs to be more rigid and there must be no backlash in the feedscrew - so better with CNC which will have ball feedscrews.
@k5at10 жыл бұрын
Nice work John. Thanks for sharing. HAPPY NEW YEAR!
@doubleboost
10 жыл бұрын
Thanks Herb All the best for the New Year
@gbowne110 жыл бұрын
Lol... Love the outtake at the end.. I think I woulda said the same thing...
@gbowne110 жыл бұрын
Very nice work John
@rchopp10 жыл бұрын
Definitely have to make one of those..
@209porker10 жыл бұрын
Another great video John. Happy New Year to you and I look forward to more of the same in 2014. I know the next project on my Bridgy.
@H3adcrash10 жыл бұрын
What a cute little hydrovane compressor you've got there :) Have a happy new year!
@doubleboost
10 жыл бұрын
Hydrovane 15 100 litre tank It is on permanent loan Thanks for watching Best John
@FredMiller10 жыл бұрын
Nicely done! Simple and dead easy to use. Thanks John
@gomezpiro9 жыл бұрын
Very smart !
@bbtjd00110 жыл бұрын
What is a project... without at least one cuss word. Love the outtake. Happy New Year John! Thanks for the videos.
@doubleboost
10 жыл бұрын
Thanks for watching Best John
@Opinionator5210 жыл бұрын
Handy tool, you could also make it longer with slip fit outer shouldered dowels and multiple holes... Just a thought, nice video as always! Like the bloopers. Thanks for sharing! :o] O,
@doubleboost
10 жыл бұрын
It could be modified in many ways Thanks for watching John
@oxtoolco10 жыл бұрын
Hi John, What kind of brush is that in your oil cup? It looks like a custom job. Love the shirt. Good color for the shop. Another mod to the center finder is a round boss at the center of known diameter, say two inches. You can now position your center hole in relation to the end of the tube accurately using a combination square. Happy new year! You are way ahead of us on this. Tom
@julianreese6021
2 жыл бұрын
you all probably dont give a shit but does anybody know of a method to get back into an instagram account..? I was dumb lost my password. I love any tips you can offer me!
@kenzoxzavier9503
2 жыл бұрын
@Julian Reese instablaster =)
@julianreese6021
2 жыл бұрын
@Kenzo Xzavier thanks for your reply. I got to the site thru google and I'm in the hacking process now. Seems to take a while so I will reply here later when my account password hopefully is recovered.
@julianreese6021
2 жыл бұрын
@Kenzo Xzavier It did the trick and I actually got access to my account again. I am so happy:D Thank you so much you saved my account!
@kenzoxzavier9503
2 жыл бұрын
@Julian Reese you are welcome =)
@dizzolve Жыл бұрын
8:30 what do you call the grind on that endmill? I've never seen the flutes that fat out near the cutting area. or that flat profiled shape of the flutes. Pretty cool tool
@shawnlund10 жыл бұрын
Thanks for the video John. I have never seem an end mill with flutes like that, is there a specific name for it? Cheers
@Keith_Ward
10 жыл бұрын
Looks like it is a five or six flute end mill.
@scheppach69
10 жыл бұрын
It's a roughing end mill, fast stock removal but sacrificing a good finish.
@Keith_Ward
10 жыл бұрын
Kevin Smith Roughers have distinct individual teeth but I guess we can wait to see what John calls it.
@doubleboost
10 жыл бұрын
As far as I know it is a "roughing carbide cutter" A friend gave me a few of them I use them all the time Thanks for watching John
@PickingDude10 жыл бұрын
Are you friends with Angus Young?
@martinwalters19548 жыл бұрын
ummm...what language are you speaking?
@hafzamacie88583 жыл бұрын
I prefer to build with Woodglut plans.
@TheHireTheBetter10 жыл бұрын
John, your videos are great, but sometimes my American ears can't understand a word you're saying. Haha!
Пікірлер: 48
Handy little tool, and the procedures to make it are relevant to other projects too. Good job, John.
@doubleboost
10 жыл бұрын
It is a good tool to make Good practice for drilling holes John
Cheers John for all the entertaining and educational filems and the time you take to produce them. Between you, Keith, Abomb and the gang you keep me sane! All the best to you and yours for 2014.
@doubleboost
10 жыл бұрын
Thanks for the kind words Best John
John: Your wife is a good sport to get you the shirt! Please thank "Mrs. Doubleboost" for all of us. I hope you had a merry Christmas and have a happy new year! Bruce.
@doubleboost
10 жыл бұрын
Hi Bruce "Mrs Doubleboost" is a very good sport Regards John
Hi John. Very useful tool indeed. Everybody is likely to make one now! You're right about a heavier machine making climb milling possible. I actually rely on the weight of the bridgeport table to allow me to get a better final finish by climb milling.
@doubleboost
10 жыл бұрын
You can not beat a heavy solid machine Regards John
I've seen those with the middle hole sized for a pencil or marker...lets you draw a centerline down the length of the workpiece. I'm also thinking a v-groove along the top would be useful for finding the center on round bars...just use it upside down. Hmmmm...magnetic dowel pins so it hangs on by itself? Ok, I'll stop! LOL! -- Mike
As a wood worker we used something like this with a router to find the center of a board on edge
Absolutely love the out takes !!!
Great video John. Will have to make one.
Nice work and a really useful piece of kit
That will be a handy tool .And could be modified for other uses Have a Happy New Year
That's a handy tool to have! Thanks for showing!
Climb milling offers longer cutter life and better finish - but the machine needs to be more rigid and there must be no backlash in the feedscrew - so better with CNC which will have ball feedscrews.
Nice work John. Thanks for sharing. HAPPY NEW YEAR!
@doubleboost
10 жыл бұрын
Thanks Herb All the best for the New Year
Lol... Love the outtake at the end.. I think I woulda said the same thing...
Very nice work John
Definitely have to make one of those..
Another great video John. Happy New Year to you and I look forward to more of the same in 2014. I know the next project on my Bridgy.
What a cute little hydrovane compressor you've got there :) Have a happy new year!
@doubleboost
10 жыл бұрын
Hydrovane 15 100 litre tank It is on permanent loan Thanks for watching Best John
Nicely done! Simple and dead easy to use. Thanks John
Very smart !
What is a project... without at least one cuss word. Love the outtake. Happy New Year John! Thanks for the videos.
@doubleboost
10 жыл бұрын
Thanks for watching Best John
Handy tool, you could also make it longer with slip fit outer shouldered dowels and multiple holes... Just a thought, nice video as always! Like the bloopers. Thanks for sharing! :o] O,
@doubleboost
10 жыл бұрын
It could be modified in many ways Thanks for watching John
Hi John, What kind of brush is that in your oil cup? It looks like a custom job. Love the shirt. Good color for the shop. Another mod to the center finder is a round boss at the center of known diameter, say two inches. You can now position your center hole in relation to the end of the tube accurately using a combination square. Happy new year! You are way ahead of us on this. Tom
@julianreese6021
2 жыл бұрын
you all probably dont give a shit but does anybody know of a method to get back into an instagram account..? I was dumb lost my password. I love any tips you can offer me!
@kenzoxzavier9503
2 жыл бұрын
@Julian Reese instablaster =)
@julianreese6021
2 жыл бұрын
@Kenzo Xzavier thanks for your reply. I got to the site thru google and I'm in the hacking process now. Seems to take a while so I will reply here later when my account password hopefully is recovered.
@julianreese6021
2 жыл бұрын
@Kenzo Xzavier It did the trick and I actually got access to my account again. I am so happy:D Thank you so much you saved my account!
@kenzoxzavier9503
2 жыл бұрын
@Julian Reese you are welcome =)
8:30 what do you call the grind on that endmill? I've never seen the flutes that fat out near the cutting area. or that flat profiled shape of the flutes. Pretty cool tool
Thanks for the video John. I have never seem an end mill with flutes like that, is there a specific name for it? Cheers
@Keith_Ward
10 жыл бұрын
Looks like it is a five or six flute end mill.
@scheppach69
10 жыл бұрын
It's a roughing end mill, fast stock removal but sacrificing a good finish.
@Keith_Ward
10 жыл бұрын
Kevin Smith Roughers have distinct individual teeth but I guess we can wait to see what John calls it.
@doubleboost
10 жыл бұрын
As far as I know it is a "roughing carbide cutter" A friend gave me a few of them I use them all the time Thanks for watching John
Are you friends with Angus Young?
ummm...what language are you speaking?
I prefer to build with Woodglut plans.
John, your videos are great, but sometimes my American ears can't understand a word you're saying. Haha!