Cellulose Insulation: 5 Reasons To Use It In Your Attic

Cellulose insulation is a great choice for insulating your attic, especially if your family’s health is important. Blown-in cellulose is recyclable, easy to install and has a high R-value. But is it the perfect solution for your project? Rise CEO Matt Daigle recently installed insulation in his attic and chose blown in cellulose after considering fiberglass insulation, mineral wool, and natural materials. Follow along with footage from Matt’s installation, and his lessons from his tough buying decision.
Sections:
0:00 Introduction to Blown-In Cellulose Insulation
1:24 Easy to Install
2:02 Low Carbon Footprint
2:26 It Won't Harm Indoor Air Quality
2:52 Cellulose is a Great Insulator
3:28 Cellulose is Fire, Moisture, and Insect Resistant
3:48 When Not to Insulate with Cellulose
#Cellulose #insulation #attic
-------------------------------------------------------------
🛒 Shop Home Improvement for Your Health, Wealth, and Planet 🛒
-------------------------------------------------------------
United States: shop.buildwithrise.com/
Canada: shop.buildwithrise.ca/
Sources:
How to choose the best insulation for your home: ow.ly/X3MY50wFMEj
Facts about blown-in cellulose insulation: ow.ly/Hz7S50wFMFH
Formaldehyde Hotspots in the Home: ow.ly/ERPS50wFMIh
Facts about fiberglass batt insulation: ow.ly/ZQ8S50wFMJr
-------------------------------------------------------------
💌 SUBSCRIBE TO OUR CHANNEL! 💌
-------------------------------------------------------------
We hope you enjoyed this video! The best way to stay in the loop and receive notifications of new content to come is by subscribing to our channel. Also, feel free to leave a like and comment on the video with any feedback or questions you may have. Thank you for supporting Rise videos!
-------------------------------------------------------------
💬 STAY IN TOUCH! 💬
-------------------------------------------------------------
Website: www.buildwithrise.com
Facebook: / buildwithrise
Twitter: / buildwithrise
Pinterest: pinterest.ca/buildwithrise/
LinkedIn: / buildwithrise
Instagram: / buildwithrise

Пікірлер: 27

  • @buildwithrise
    @buildwithrise4 жыл бұрын

    What material are you considering for your attic?

  • @shmutube
    @shmutube2 жыл бұрын

    Deeply appreciate covering a situation where cellulose would *not* be recommended! It is far too rare that attitude of providing information is available. Great job!

  • @maggiebarnhart2030
    @maggiebarnhart2030 Жыл бұрын

    Great information. Just wanted to know before we get our home done.

  • @AssuredHomeInspect
    @AssuredHomeInspect2 жыл бұрын

    Even more important is air sealing. Your 2nd criteria is environmental impact, and then you suggest spray foam. Use what ever material for insulating you like, but be sure to air seal. The reason Codes call out R values is because its easily measurable. In order of importance in any home is 1)water 2)air3)vapor 4th and last...Insulation.

  • @AndresRodriguez-sm1fr
    @AndresRodriguez-sm1fr2 жыл бұрын

    Very informational. Thank you for the video, and god bless.

  • @genevaurquhart8130
    @genevaurquhart81304 жыл бұрын

    Good vid. My question is why are there no vids on blow in cellulose insulation in floor joists ?

  • @stevenei2189
    @stevenei21893 жыл бұрын

    Guy was here today in minnesota friend of friend using cellulite couple weeks out spring put in a couple vents in the spring nice video

  • @iainmacdonald4410
    @iainmacdonald44103 жыл бұрын

    if i had my way it would be cellulose in the attic and sheep wool in the walls (there is wool insulation made for houses) im sensitive to VOC's so the less the better for me. I worked on one house where the home owner spray foamed the roof sheathing from underneath so the attic was now considered part of the conditioned airspace and made it possible to install an HRV in the attic

  • @chrisdeschenes6554
    @chrisdeschenes6554 Жыл бұрын

    I have a bungalow built in the late 50's . I have taken out all of the old insulation and put in 6 inch rockwool batts . Rafters are 6 inches . current R is 22 (rockwool) . I have used pieces of 3/8 plywood in the attic to get around easier . It's not nailed down . Can i add cellulose directly over the plywood ? I need to achieve r-60 to 70 .

  • @navyjohnes
    @navyjohnes2 жыл бұрын

    Thank you for the information. I am considering insulation...Is cellulose the same as two-part foam? I am reviewing information from the EPA. According to the EPA, two-part foam may result in an increased levels of Radon. prior to insulation, if i choose to move forward ..., it is required that I sign a "Radon Informed Consent form" i guess that tells all... Do you have any videos on the two part foam insulation?

  • @nicholasingratta423
    @nicholasingratta42311 ай бұрын

    Do we need Vapor barrier for cellulose in the attic?

  • @jayescreations489
    @jayescreations4893 жыл бұрын

    I am considering blown in fiberglass over 4" rockwool

  • @petekane2501
    @petekane25012 жыл бұрын

    I plan to add more cellulose over existing 40 year old cellulose

  • @joelsaavage2397
    @joelsaavage23972 жыл бұрын

    A real misconception is formaldehyde in modern insulation.

  • @bryanmontgomery4050
    @bryanmontgomery40504 жыл бұрын

    Foam, by far the best!

  • @buildwithrise

    @buildwithrise

    4 жыл бұрын

    Offers great value per dollar 👍

  • @hybridteas

    @hybridteas

    3 жыл бұрын

    Mr. Sunshine also better insonorisation. And eco friendly. Cellulose is the best

  • @thomasschafer7268

    @thomasschafer7268

    Жыл бұрын

    Am arsch die Räuber!!💩💩💩

  • @Saguanay
    @Saguanay3 жыл бұрын

    Have 6 inches of pink in the attic. Going to overlay the Cellulous over it.

  • @briangc1972
    @briangc19723 жыл бұрын

    Foam is better because it provides an air barrier. Cellulose, like fiberglass, can not stop airflow. Insulation that allows air to flow through it is not an effective system. Foam will literally pay for itself in under 7 years vs cellulose and 5 years vs fiberglass when installed by a pro. Buy once cry once, reap the benefits. DIY foam kits are extremely cost effective and very easy to use/ apply. The foam costs twice the price of cellulose, but offers many times more performance benefits and is easier to apply than cellulose. For a DIYer, foam is actually easily 3 to 4 times faster to apply so if you have any value to your time, foam is cheaper when you factor your labor cost. Clean up is less as well.

  • @benjaminjoseph3392

    @benjaminjoseph3392

    3 жыл бұрын

    Doesn't foam release a bunch of VOC's not only during the install but on a continuous basis for a long time?

  • @GoldensRule45

    @GoldensRule45

    2 жыл бұрын

    Cannot find the kits, but if they were available it would be over 10 times the cost of cellulose. My quotes were ranging from 20,000 to do a garage with 1600 sq ft. Cost to do dense pack and blow in cellulose will be less than 3k

  • @briangc1972

    @briangc1972

    2 жыл бұрын

    @@GoldensRule45 I know the kits are available with free US shipping because I've bought them. You get 650 board feet in a kit, they sell kits is bundles of 4 or 10 with reduced prices. You can spray foam in a 1600 sq ft building for under $3k

  • @thomasschafer7268

    @thomasschafer7268

    Жыл бұрын

    Die Dämmung stoppt nicht den Luftstrom. Luftdichte Folien und OSB sorgen dafür.

  • @deerepower337
    @deerepower3373 жыл бұрын

    I stopped watching when he said impact on the environment

  • @thomasschafer7268
    @thomasschafer7268 Жыл бұрын

    Was herrscht der Irrglaube das Dämmung luftdichtet. Niemals im Leben. Luftdichte Folien mit klebebändern und OSB Platten sorgen für luftdichte