The level of crafmanship of the people you surround yourself with to accomplish each of your project is quite impressive !!

@tcollogan

Ай бұрын

it's not what you know, but who you know....

@getahanddown

Ай бұрын

You jizzed several times just during the cage fitup too?

@RyanTuerck

Ай бұрын

100%! Thank you 💪🏼

@getahanddown

Ай бұрын

@@tcollogan These guys are who they are because of what they know and how long they have been perfecting what they do. "Who you know" is about name dropping but these guys aren't a crew of names, they are a crew who know each other are all in on the project

@MotoWot

7 күн бұрын

And yet I did not see one decent chamfer on the cage tubes. Some people say cage tubes only need to be deburred, not chamfered, but they are wrong. Testing of cage spec joints by both load cell and cut/acid etch has proven time and again that a full depth chamfer is best. When you are welding the inside of a joint less than 90 degrees, there is a possibility there won't be full penetration to the id of the tube. The more acute the angle, the greater the possibility this is happening. Imagine the joint is like a valley, the steeper the valley, the greater the chance of the weld bridging higher up the valley, rather than getting right to the bottom of the V. Modern cages are full of acute joints. I'm not saying the cage is garbage, it's just not best practice. #SEMAspec

Got to admit Ryan doesn't skimp on the quality of fabrication on the builds .

@MrJermbob

Ай бұрын

Second to none.

@RyanTuerck

Ай бұрын

Never 💪🏼

I could watch Victor measure, cut, drill, and sand all day (first time, every time). Such high level craftsmanship.

@RyanTuerck

Ай бұрын

Same here! He is really good at what he does that’s for certain.

Victor is a legendary fabricator. It's always a pleasure when I get the opportunity to go to his shop and capture him at work. SO Pumped he's in on this project!

@RyanTuerck

Ай бұрын

🤘🏼🤘🏼

now this is the type of shit that I wouldn't want to have to DIY. These guys are making it look easy with all that experience and solid understanding

Great to see Portugal dudes working in these kind of projects with this level of quality !

You can tell when someone is a pro when they work super fast. Just another day. Super easy for these guys

Incredible work. This is why cages are expensive - not even counting material cost, the time it takes to do all this (not to mention the years of honing their skillset) is crazy. My favourite part was the 3/4 cut in the vertical door tube, that is so clean

Ryans quality definitely does not go unoticed. One of my favorites to watch when he comes out with builds. Backyard content is even better because it makes it feel like he’s still grassroot.

When you find a Victor on your motorsport journey, you never let that dude go! Unreal work ethic. This will be an insane build.

@RyanTuerck

29 күн бұрын

100% 💪🏼💪🏼

This is coming on beautifully. Victor did my cage too. Absolutely gorgeous

thank you Ryan and to your camera man who spent hours recording this. It was a true pleasure watching this level of craftsmanship!

Once you goto Victor you’ll never go elsewhere for fab. Solid guy & his work speaks for itself. Glad to have him right up the street from me 🤣

As a fabricator and chassis builder, I often find watching people build the chassis of a race car on KZread very hard……..this is not one of those times. Thank you for the long format, I found that very relaxing to watch.

@RyanTuerck

Ай бұрын

Glad you liked it. More of this coming soon.

@jacobherzog

5 күн бұрын

Couldn't agree more!

That’s it 😎 no bullsh t ! Just men at work, no jabbing 👍 great work

HOW THE FARRK will that all get welded ? Man the quality of these builds messes my mind up. Thanks so much for showing it. Love from New Zealand.

Cleanest fabrication/cage work I’ve ever seen! Nice work Victor 🫡

Loving this project already. Sick fab work from Victor.

Top notch build, cant wait to see and hear the GT4 come back to life

This is on a level not shown on videos before absolutely insane workmanship!!

Dame that’s some next level cage work. Love the content your cars are always works of art.

@RyanTuerck

Ай бұрын

Appreciate it 💪🏼

Man Victor is an artist. Such skillful work, and whoever was filming here killed it too. Great video!

@ZachJopsonCreative

Ай бұрын

Appreciate that! Love filming at Victor’s 💪🏼

@RyanTuerck

Ай бұрын

Zach is the man 🎥💪🏼

Amazing work and attention to detail. Love car fab I could watch it all day. Stainless fabricator the last 9 years

I've never seen a celica get cut up like this before, freaking awesome!

I won’t lie, I don’t religiously watch every one of your vids, but after seeing the cage vid for the Supra, I knew I needed to see this.

This is art, and poetry in motion

@RyanTuerck

Ай бұрын

Truly is.

This build sets a different tone for sure 👍🏾 let’s see more of this build please Ryan 🙏🏾

The prep work that went into every bar was epic!!! And the notch for the apillar support bar was my favorite!!!

@RyanTuerck

Ай бұрын

Yeah that was really good. Victor is the man 💪🏼

Jeez I could watch Victor work on your Celica for hours! Very satisfying. This project will be spectacular once it’s finished.

@RyanTuerck

Ай бұрын

Yes sir 💪🏼

I see Victor is a master... great video to watch!

Hell yea my favorite part of things! The fab work!

The work of this guys is amazing , my new favorite ASMR 😅

@RyanTuerck

Ай бұрын

Haha true that.

Bro is surgical with that blade. Wow!

Most people: I gutted my car, now it's a race car. Victor: no you didn't. No it's not.

@MrJermbob

Ай бұрын

Hahaha 100%

The Dom spec 👌Is now Victor spec 👍

Amazing episode once more. Always such a high level on all the craftsmanship, video editing, taste!

@RyanTuerck

Ай бұрын

💪🏼💪🏼

It's just incredible! Me as a lover of this type of cars watching these video and recognizing those 2 flags... Portugal flag and Azores flag. I was born and raised in Azores and it's just so cool watching that even in the smallest place at the Atlantic Ocean are born some talented people. Amazing project!

@RyanTuerck

27 күн бұрын

🤘🏼🤘🏼

Love the asmr like fabrication work! The way Victor applies his craft is truly fabulous! Another sick looking whip Ryan 🤘

@RyanTuerck

29 күн бұрын

Couldn’t agree more. Thank you 💪🏼

Victor is top notch! Great work like always.

Toyota is bringing out a new Celica AWD turbo!!! It looks good, but nothing beats a 96 - 98 Celica AWD GT4!!! Classic cars!!! Luv you're builds Ryan!!!! 1 of a kind builds!!!

@RyanTuerck

24 күн бұрын

I saw that! Hopefully it’s true!

That's a work of art! Great roll cage 😉

It’s often said that the hardest part of any project is making that first cut. Because once you chop, you have no choice but to move forward. Regardless, I can’t help but admire the bravado these guys whacked apart a perfectly fine shell. That’s confidence.

This build is going to be so cool. I’m glad I found this channel. 👏👍

@RyanTuerck

Ай бұрын

Welcome aboard hope you enjoy it 💪🏼

@george_1702

Ай бұрын

@@RyanTuerck thanks, I’m sure I will. 🤟

Beautiful work!

We use 3d scanners to check for aero smoothness on aircraft. Cool stuff.

@RyanTuerck

Ай бұрын

It’s really rad. There’s a lot you can do with the data.

Victor is a BEAST!

Watching from Ireland this build is on another level that rollcage is a work off art I use to own a 1994 celica st205 turbo road car it was the wrc homologation edition number 1905 of 2500 made I can't wait for the next episode such good content :)

yeah man that dude is on another level aye thats some epic Sheit right there

Got some Wess Anderson vibes with the shots in Victors shop

Hey Toyota Seeeeeend the check these guys got all the craftsmanship

Another dope project no doubt!!!

Victor, bem feito cara! Um dia eu quero fabricar coisas como vc!

Those full face masks with filter are god mode for chassis work, love mine. Great work btw, so well done!

Soooo skoke for this project!!! I love my ST-205 and it’s so hard to find content about Celica gt-four…. Really glad to watch this! 👍🏻👍🏻

Bill is the coolest 🙌

@RyanTuerck

Ай бұрын

Bill is the best!!

Anybody else watching in silence as they were cutting forget to breathe? lol

Victor is an artist

@RyanTuerck

20 күн бұрын

He definitely is 💪🏼

Love it, makes me want to build a new shell before I've even finished my existing build! 😂

“We’re back! It’s wintertime!” My man, don’t tease me with that snow… it’s July and 120F where I’m at lol😂

That is some sexy cage fitment

That air saw was screaming for a break 😂

I just became a subscriber today and I just fell in love....no diddy!...... I watched the supra video when you delivered the computer....omg ....that f1 engine.....your freaking amazing....I am forever a fan

🎉 MOM!!!! TUERCK DROPPED!!!!!!!

This give me so much motivation to finish my build 💪 thanks ! awsome build

@RyanTuerck

29 күн бұрын

You can do it! 🤘🏼

That thing really got the Honda Civic drag car treatment

If that guy did not already have tinnitus he certainly does now lol

First off, that band saw cutting more that 45 degrees is epic. Also im shocked that that the tube dosnt move in the mill vice. Ill have to try that.

Snow? You have been at this for a while!. When you are done I expext a video of it blasting through JF's farmfields.

Saw the Stout at Goodwood. Lookin good!

@RyanTuerck

Ай бұрын

Thank you 💪🏼💪🏼

Noticed you removed the cross supports where the stock seats were. I am at the same stage with my build removing them to lower my seat to get me to fit better. Would love to see how you mount your seats to give me some ideas. Thanks! Love the content.

Wow this has been in the works for a while!

This guy has all the weapons of mass destruction

👋 Bill, 👋 Ryan

Amazing roll cage fab!

AWESOME!

Ah yes, winter time

Please weigh the empty body. I'm curious what will happen next. great project.

Amazing craftmanship! I got one question though Ryan, are you guys not deleting the sunroof opening? with the cage in place might be harder to tackle that now

Incredible 👌🤘🇨🇦

unreal 🎉

i miss my celica 😭

I need that saddle tank design 👌💯 ive been wanting an atermarket type one for years cause stock tanks get ffed up after a few offs 😂 and didnt wana make it myself 😂 rally bag tanks are way too expensive and they are not a requirement

The importance of finding an already straight chassis

ASMR for people who love going to the dentist

@RyanTuerck

Ай бұрын

😂😂

Awesome content❤❤

Is it me or didn't he weld the cage entirely near the roof.. That is one of the most important pieces !!! In a heavy crash I wouldn't like to be sitting in it.

All that awesome fabrication and you haven't made a roll over jig so you laid on the floor 😂😂😂😂

Would love to see you do a street build, but swap the G16E-GTS, 6 speed, dash from a GR Corolla in one. 😉

I really need to see how he's gonna drop this cage and weld out the top? 🤔

Sick build man. When you get this stitched up and driving, do you think hitting up Colby Raha for some off road doubles session, would be a good idea? Heavy promo material for Rockstar Energy!

Badass

Reiger 🇳🇱 🤘

🔥

The fuel system is going to be like the c8 corvette style…a fancier surge tank so to speak

What brand of body saw did they use???

Big question is will he learn to say celica properly before the end of the series.. 😂😂

@ZachJopsonCreative

Ай бұрын

Never 😂

@AJ_Irving

Ай бұрын

@@ZachJopsonCreative we will see were it continues after he is back from Goodwood 😂 over here your building a what.. it’s a what.. say what.. 😂🤣

The master craftman has to be deaf already, that would be the only reason for not using any hearing protection :/

We’re Dom

✌️🤙

Anybody see the Judd anywhere? Seems like its been a slice...