CCS Creative Car Sounds - Tips & Tricks installing Subwoofer Wiring to the OEM system feat Mk6 Golf
Автокөліктер мен көлік құралдары
Thought I'd Share a few examples of what to do when you want to install an aftermarket subwoofer on the the Original Equipment of Manufacture, this video has a Volkswagen Mk 6 Golf having the work done but a similar principle is applied to other vehicles, hope you enjoy and learn some nice tricks and tips.
www.creativecarsounds.co.uk/
creativecarsounds
creativecarsounds
#Tips
#Tricks
#wiring
Пікірлер: 16
Probably the best video I have seen to date. I'm an experienced installer however the way you break it down in an understanding manner is great. Keep up the good work / video. The tip about connecting to the rear speakers is golden a lot of people don't understand the concept. 👍👍👍
Clean work! Good job sir!
Good job
What colour cable do you connect the blue remote wire too on the back of the head unit?? Thanks in advance 👍
Always called speed clips
Can I ask is the self tapping screws and the metal clips for the ground is that work well?
Sam a good hockey player!!🤔😂😂. Stick him back in goal where he can’t do any damage! 😂
Did you screw the fuse holder to the airbox?
No milk,no toilet rolls your not to bad at this g Dr or a brick layer🤣
I've always called them speed nuts
Where do you connect remote wire for the amp on the factory wiring harness?
@creativecarsounds4484
10 ай бұрын
With most good quality line out converters it will generate a remote wire when it is sent an audio signal.
Good day can u please help. I connected my line out converter to my stock radio and now my amplifier is going into protection mode. Ive connected mine to the front speakers. Any suggestions as to why my amp goes to protection mode.
@creativecarsounds4484
2 жыл бұрын
Protection mode can mean many things, if it goes into protect without the RCA connections then possible issue on wiring circuit or just bad amp, if only at high volume then maybe a weak or faulty speaker and the amp is protecting itself from low resistance, too hard to tell you exactly without testing things on the car.
Should run power & rca down different sides of car to stop interference
if you dont want to hear the the feedback in your sub never run the RCAs with a Power wire..