Cat 950M RC construction model designed by Burnie222 - Impressive début!
Ойын-сауық
This wheel loader CAT 950M is designed and sold by Burnie222 on Cults3D.
This is an incredible model ! easy to build with all help and instructions you need, plus list of parts etc.
I am still testing this construction model but so far it has been nothing short of amazing with lot of power.
More testing need to be done soon !
******************************
This channel is dedicated to Construction RC model, from excavator to dozer and trucks !
Hydraulic machines that run like the real ones.
CAT 330F. made by RST Models (check Facebook).
It was a very limited serie, full metal and full hydraulic (including the turret swing system).
Weight 17,4kg without battery
27 Bar hydraulic pressure
1/14 scale.
DEERE 755D Track loader components
Updated May 2021.
Main body
Carson Lr 634 - Base model with no drive motors, no electronics, no sound, no lights -
www.tecnimodel.com/lr634-cars...
Drive motors from modellpraezision -
/ community
but I would recommend Kampshoff because this one is too big , its difficult to fit it in the loader.
www.modellhydraulik.com/
Electronics
Servonaut MFX X 2 for traction motors-
www.tecnimodel.com/servonaut/...
Neuron 60S for hydraulic pump -
fr.aliexpress.com/item/400100...
Servonaut SMB for Sound -
www.tecnimodel.com/modules-so...
Kris77 speakers
Receiver FRSKY X8R -
www.tecnimodel.com/recepteurs...
Hydraulics
(including cylinders, valve block, pressure regulator etc) - MP-E Models -
The complete kit is not available anymore, just contact Maxime at MP-E Models and ask him.
4in1 Bucket - MP-E Models -
www.mpe-models.com/produit/go...
Remote control system
Radio control FRSKY X10S + 4D Gimbals -
From AliExpress
Mercedes-Benz AROCS components
Main Body
Tamiya AROCS 3348 main kit
www.tecnimodel.com/camions-ta...
Tipper system from Tamiya
www.tecnimodel.com/bennes-et-...
Kit de roulement
www.tecnimodel.com/roulements...
10mm Height kit
Steering Servo
www.tecnimodel.com/servos/800...
Gear servo
www.tecnimodel.com/servos-fut...
Diff Lock Servo
Metal Servo Arm 25T
Truck Sound Unit
2 Speed Planetary Gearbox (1:64 & 1:16)
LESU Front Steering Metal Axle For 1/14 Truck
Reality Leaf Spring
1/14 Steering Axle & Gear Box Servo Mount
Metal Servo Mount For 1/14 Scale Trucks
Electronics
Servonaut S22 ESC
www.tecnimodel.com/packs-comp...
RCBRMIN Truck Sound Unit
www.rcbrmin.com/index.php?main...
Kris77 speakers
FRSKY X8R receiver
Taranis X7 radio control
Пікірлер: 9
Nice video, i will probably build one too.
@AlokocatRCModels
Жыл бұрын
Thanks, You will have a lot of fun !
Which percentage of infill are you using? Regards
@AlokocatRCModels
Жыл бұрын
About 30% all around with some parts at 50%. Also I use 5 walls and I print in PETG.
Super vidéo ! =) Je voulais savoir comment tu fabrique tes blocs béton , j'ai fait un moule mais le résultat n'est pas top ? Continue =P
@AlokocatRCModels
Жыл бұрын
Bonjour et merci ! J’ai acheté des moules en silicone sur un site hollandais dont je me souviens plus le nom lol 😂 je vais chercher et je te dis ça
@DJfAnAtiCOFFICIEL
Жыл бұрын
@@AlokocatRCModels ça serait top =)
@AlokocatRCModels
Жыл бұрын
Je t'ai pas oublié ! Voila ou j'ai acheté mes moules : www.rc-labshop.nl/c-3375209/betonblocks/
@DJfAnAtiCOFFICIEL
Жыл бұрын
@@AlokocatRCModels Merci beaucoup =p