Thank god for operators like this, they keep me employed
@LostAbroadVideos6 жыл бұрын
The real issue here is the mechanical physics that are impacting the machine itself when operated at speeds like that. Every hard hit into the spoil pile can cause micro-fissures in everything from transmission gears to moldboard and circle pins, brackets, and cylinders. He would have completed the task faster had he articulated and side-shifted, pulling the load out with the tandems directly behind the moldboard and the fronts side-leaning on the last pass. He would have operated at a much slower and safer speed, saving the grader, and producing a better, more compacted result.
@derek4real179
2 жыл бұрын
Gary Davis must be a union hand for sure
@azzoozaid5622
2 жыл бұрын
Je voie un sabotage de matériel
@tj_stroi9662
2 жыл бұрын
😔
@MJ-it8ru
2 жыл бұрын
can tell you're not an operator. he was running it like that to beat the rain that was about to start
@RobertWilliams-mk8pl4 жыл бұрын
You can always tell when an equipment owner is not present. Not only is the operator abusive, he's dangerous.
@gregoryhelton2408
4 жыл бұрын
Dumbass
@DonaldJPump24
3 жыл бұрын
Robert Williams no it’s called getting that shit graded before the next truck comes
@blauer2551
3 жыл бұрын
@@DonaldJPump24 there’s already 50 piles on the ground, he wasn’t in a hurry until the video started apparently
@georgecooksey10905 жыл бұрын
Wow! Listen to that motor labor. And see how it hops and the speed he hits those piles with? Yeah that’s a way to mess up a turn table or bend a moboard. This person would have lasted 1 pass working where I did. I would have sent him home after his first pass.
@LostAbroadVideos6 жыл бұрын
The sad thing is this operator likely feels that he is a good operator. He is NOT. He would quickly find himself fired from most companies I've ever worked for or known.
@AinaeIslam2023
3 жыл бұрын
So what do you think what wrong is he doing? Plz explain. Thanks
@bekirkarabulut4404
3 жыл бұрын
@@AinaeIslam2023 operatör is good.no problem
@liaquathussain2355
2 жыл бұрын
Yes u r right
@liaquathussain2355
2 жыл бұрын
@@AinaeIslam2023 I m also grader oprtr
@johnscrimgeour4888
2 жыл бұрын
@@liaquathussain2355 as bad as him? Hope not.
@sergioferreira1675 жыл бұрын
Bom de mais o cara manobrando a niveladora, tiro o meu chapéu a este grande senhor , trabalho com todas as máquinas mas com esta assim rapido nunca kkkkkkk parabéns
@gq-cw6xi
Ай бұрын
If you have never worked with one how in the fu ck do you know if it is good low IQ fu ck tard
@daddysteel35145 жыл бұрын
Love these machines always wanted to run one
@trevorfillmore698
3 жыл бұрын
I am lucky enough to get a grader position at work I drove truck for 17 years local and long haul then 3 years I got on with the D.O.T amd love it applied for a grader job this spring and got it very deferent that driving truck slow and steady.
@bladehand2411
3 жыл бұрын
Love it been running one on a wind farm for last 8 months best thing ever
@rbeck8204 жыл бұрын
That operator must be some kind of COWBOY. I'd fire him after 2 passes if that were my machine...….
@ChaseLandMgmt
3 жыл бұрын
Good thing it isn’t, move along. Most over played comment on KZread.
@mostafizairtravels2625
3 жыл бұрын
@@ChaseLandMgmt ঠৃছংপূ
@user-yr4qz9jy5i
3 жыл бұрын
ช
@user-yr4qz9jy5i
3 жыл бұрын
ๆ
@martymorse2
3 жыл бұрын
He is skinning that mule.
@jeronimopereiradacruz9723 Жыл бұрын
Essa patrol e ótima muito boa ela
@74superglide4 жыл бұрын
Take a drink every time someone says "fired" or some form of the word "abuse"
@MegaBassman596 жыл бұрын
WOW!! Only a bosses kid could get away with equipment abuse like that and still keep their job
@harryscrotum007
5 жыл бұрын
Wheres the abuse exactly? I never heard any clanking or metal on metal I just see production. Its a pace your not comforable with and say its bad instead.
@cesarsenacorrea9332
5 жыл бұрын
Estas máquinas si que trabaliando
@ruthnorman1922
5 жыл бұрын
Freedom Of Speech that pace isn’t any pace that would be used on a real job. That’s dangerous and would be shut down instantly.
@jayskinny420
5 жыл бұрын
The higher gears he is operating at is not meant for pushing that amount of material.. I feel bad for that things transmission.
@georgecooksey1090
5 жыл бұрын
going as fast as he was is A. Unsafe B. Can damage the machine that isn’t designed to take the sudden impact C. Only makes for more passes to be made in turn meaning he is actually losing production time.
@TheSoloAsylum5 жыл бұрын
Save an hour, at the cost of $400,000....he would be fired his first hour here in the US
@teteira
4 жыл бұрын
Same here in NZ
@rbeck820
4 жыл бұрын
Same everywhere
@vc8506
4 жыл бұрын
He"s the only fella they could find.
@CAMAROFAN455 жыл бұрын
The only time I've seen grades move that fast is when they are on the road or backing up to start over I'd not be surprised if he has wrecked a few transmissions.
@caneloguero
4 жыл бұрын
They have 6 gears forward and 6 in reverse.
@bensaadabdessamed9308
3 жыл бұрын
Don't worry, it's not a Honda accord
@joaoluissilva15514 жыл бұрын
140 tem torque e pegada 😃👍🏼👏👏
@tavaresimports71392 жыл бұрын
UAU SENSACIONAL TÁ PARECENDO OS OPERADOR DE MOTONIVELADORA DAQUI DO BRASIL🇧🇷 FERRAMENTA😁✌
@theguyguy35283 жыл бұрын
Driver- Hey bro film me!!! Friend - Well, promise not to kill me?
@acristianocris98645 жыл бұрын
Lindo demais ver essa máquina!!
@jonasmagarro43583 жыл бұрын
He made the grader into RACING CAR as i know 1st gear to 2 nd gear is advisable
@jlupe76685 жыл бұрын
Looks like this guy is working by the mile not by the hour lol
@ulvervazquez5878 жыл бұрын
es un buen operador , se vee ke no es novato , pero la verdad esk si esta mal ala revolución ke lleva la maquina , todo modelo H, K , M por muy buenas ke sean rekiere de un buen manejo para cuidar el motor y no forsarlo y realmente no es un material liviano ,,,,,, cuando tengas algo ke es tuyo sabras VALORARLO , pero si no es tuyo te dara igual xk si ke te kema el motor sabes ke no lo pagaras ,,,,,, ay ke aser consiensia
@carlosduarte8585
5 жыл бұрын
Toca hacerle por que en una obra que le exijan rendimientos y no aceleras te bajan de ay
@hitachi78235 жыл бұрын
Un fenomeno complimenti
@reginaldooliveira27708 жыл бұрын
Quero ver um cara desses trabalhar aqui onde eu trabalho pura lage pedra e sem cabine e muitas abelhas e trabalhar só em primeira marcha kkkkkkkk
@fkutlu1652 жыл бұрын
Adam harbiden kullanıyor abi. Helal olsun
@eraymaral2841 Жыл бұрын
Usta dediğin böyle olur MAŞAELLAH
@renatindapatrola55105 жыл бұрын
O rapaz é bom..acho qui eles estavam com pressa por causa do tempo de chuva...material no monte é pior.depois de molhado demora um pouquinho para poder mexer nele de novo....
@florindopradoazevedofilho60294 жыл бұрын
Adoro fazer trabalho com máquinas pesadas.
@tvmachinecambodia2 жыл бұрын
Cool video
@billhill35262 жыл бұрын
Hurry up grader guy the paving crew will be here any minute. The line painter is already here waiting. Do a good job.
@darrellblackwell65864 жыл бұрын
He’s definitely not an operator.
@JQuintero1896 жыл бұрын
Great video on how not to operate a piece of equipment, let alone the most precise one of them all.
@chrisbarnett39174 жыл бұрын
That’s no operator haha. Would never run my machines. Should be fired on the spot.
@edersonsimplis51275 жыл бұрын
Maquinista caprichoso boa pratica
@55SAMSUNHAVZA552 жыл бұрын
Abicim kimsin nerdesin nerelisin tanımıyorum ama yorumlarda İngilizler, İspanyollar sana övgüler yağdırmış. Yaptığınız iş vatani bir iş hatta öyle ki T.C Karayollarının web sitesinde ulu önderimizin bir özdeyişi paylaşılır ki bu özdeyiş "Gittim her yerde benden aciliyetli iki şey istediler birincisi yol, ikincisi okul" der.
@umutsonmez5858 Жыл бұрын
Eski Cat seslerine hayranım. Birde bu sesin aynısından Bulzoder de de vardı ama hangi modeldi hatırlamıyorum
@fernandooperadordetudoumpouco5 жыл бұрын
Show 👏👏👏👏👏👏
@MrClaudio19512 жыл бұрын
GREAT JOB!
@azizzen42176 жыл бұрын
عمل متقن اتمنى لكم حياة سعيدة
@frankiedee69383 жыл бұрын
The operators good at making waves
@tayfunkorkmaz17434 жыл бұрын
Very good 👍
@johndavis18475 жыл бұрын
Greyder. This person can really spell. This guy driving the greyder is really doing a great job. I am impressed. Roll on big wheel.
@hectorespinoza21874 жыл бұрын
Con un operador así Para que quiere enemigos se acaba la máquina en 6 meses andar rápido no quiere decir que es bueno lastima de máquina!!
@dotemichelblanchard1429
3 жыл бұрын
Bonsoir.conmen.tallèvous.moi.jesui.un.mecanicien
@gusthesheltie1545 жыл бұрын
Obviously putting on a show.. No need to beat a machine like that. Good luck
@manuelgleder853
4 жыл бұрын
Mester
@assanehanne3561 Жыл бұрын
Good job ❤️❤️
@andreywillianferreira72154 жыл бұрын
O camarada é bom
@johnnyd66413 жыл бұрын
Straight up he used to be a 6 way blade Dozier operator
@newportfamily75754 жыл бұрын
I work for a hire company in New Zealand it’s operators like this that just make me want to go to work every day.Ya Na,they must have a good field service mechanic.
@blueange1s
4 жыл бұрын
So you condone to how this fuckwit for the way his operating heavy machinery, just so you can have work, fucken idiots mate
@willchilton3615 жыл бұрын
This is what happens when the grader operator calls in sick and the roller operator swears he can run a blade.
@johnnyd6641
4 жыл бұрын
LMAO I can see my roller operator right now!!
@Stoparts4 жыл бұрын
Hello Nice work dear colleague.
@agustinvalenzuela36313 жыл бұрын
El andar rápido no lo hace el mejor operador, el ojito de la empresa para contratar un destructor de maquina ojala le dure para que pueda trabajar otro día.
@martymorse23 жыл бұрын
Must be near the end of the shift the way he is beating on that machine. Must have high overhead paying your CAT dealer for parts.
@rafaelrafa50345 жыл бұрын
Cat é cat ne pai!!!
@shaun4086 жыл бұрын
No wonder his damn tires are bald lol, hits the loads at 90 mph
@tomjohnson92415 жыл бұрын
Love all the high vis gear being worn by the tyre kickers. very hazardous work site,
@user-ki2zh1co6d3 жыл бұрын
خوش كريدر وخوش سايق
@kebadiouf81263 жыл бұрын
That's good job friend
@hiscifi29865 жыл бұрын
Excellent work, that soon shifted maybe 300 tons of gravel. There is a reason why the graders have so much Horsepower, you might just as well use it.
@lilpuppyvideos36583 жыл бұрын
It takes a lot of experience to operate the grader like this, he operate the equipment like a car lol.
@evanstonbalce9588
2 жыл бұрын
Patience too
@goesintite9 жыл бұрын
I'm glad that grader operator does not work for me. He's abusive to that machine. It's only a matter of time before he kills somebody or, destroys that machine.
@caleblarrabee8071
8 жыл бұрын
+Miguel Grande That's right. I thought it was just me thinking that until I saw your comment!
@panhead55
8 жыл бұрын
Yep, he's a jackass. Wait til he backs over someone trying to be a hot rod.
@wedoitmjrslice
7 жыл бұрын
speed is good if you are good but he is way to hard on the equipment.
@eliseferrari8510
6 жыл бұрын
idiot wouldn't last 5 min working for my dad
@testlord4321
6 жыл бұрын
Miguel Grande و .
@anastaciodelacruz60063 жыл бұрын
Ya quisiera verlo todo el día al mismo ritmo
@pedroschoffen2624
3 жыл бұрын
Sobre esa maquina no es problema.. los comandos permiten trabajar muy comodo.. una vez que uno se amaña puede trabajar todo un turno asi sin problemas
@eduardosoto7224
Жыл бұрын
Se descompone la trasmisión porque el torque es muy forzado anda atacando como en tercera y solo se ataca en primera y segunda se acaba Haci el equipo
@max35region3 жыл бұрын
Спец на грейдере👍 видно что опыт есть за спиной.
@jorgeguerramaurera48776 жыл бұрын
Este operador, apesar de que el material esta suelto, se desplaza con mucha rapides y esta realizando el trabajo triple veses, por otro lado, trata muy mal lamaquina.
@lobosemestepe66695 жыл бұрын
Parece a pessoal aqui quando vai chover.
@joaoluissilva15514 жыл бұрын
ENXADA AMOLADA 👏👏
@eddygoodwin70895 жыл бұрын
Looks like fun I like the contrast of the two types of rock you can come grade our drive way anytime just let me make sure the kids are in the house
@truckertom3323
5 жыл бұрын
lol
@raymondswarmer1433
4 жыл бұрын
I wouldn't let him grade my manure pile
@Jacob-646 жыл бұрын
Corrugated iron comes to mind
@greggydemira66057 жыл бұрын
he want to breakdown the machine .....this fuckin operator must be fire
@dozer16425 жыл бұрын
I remember my first time on a grader.
@eduardolea73632 жыл бұрын
Esse ae sim em enchada amolada
@Arcadia_Olive-Oil_Farms7 жыл бұрын
Did someone told the operator he had to do the job in 8:13 or he dies or his state would blow up or something? God the amount of abuse....
@adeolamorren2678
5 жыл бұрын
He is also burning a lot or fuel by going that fast
@pearllllllll3 жыл бұрын
He should be a machine tester for Cat
@geronimotuz22522 жыл бұрын
Muy buena maquina pero ay que cordinar al ch3cador para que pongan bien lod viajes de material3s para no forzar la maquina y no consumir mucho combustible y rendir en avances
@user-qg1qm9vx1o3 жыл бұрын
Отлично работает!
@katdeskinner5 жыл бұрын
What ever happened to chaining your tailgate and spreading? Or a spreader box , or bottom dumps ? Inefficient material placement.
@algooostsa30195 жыл бұрын
سائق قريدر فناااان
@elisangelavasconcelos76045 жыл бұрын
Bom demais
@balabista46505 жыл бұрын
good job
@geraldgrebin85732 жыл бұрын
Très bon travail.
@muhalwi22.3 жыл бұрын
spirit of success ❤️ semangat sukses 🧡
@matheusjuh51897 жыл бұрын
o cara e bom
@samiamhidi3083 жыл бұрын
Nice
@christopherrobertson29124 жыл бұрын
Almost everyone got a problem with the operator's speed,I have a problem with them using a grader like a d9 with a rock box.putting down that much material should be done with a dozer and a rock box.its not even close to final grade yet.
@muratibbg26795 жыл бұрын
Ustura gibi kesiyor malzemeyi operatör harika
@richardvillarreal24635 жыл бұрын
He's not even pitching the blade over to roll the fill. I'm sorry I'm at a loss of words here. That engine is gonna blow out by the way.
@azizchkour61063 жыл бұрын
Great
@darwin55568 жыл бұрын
hace el trabajo rapidamente y no veo q esfuerse mucho la maquina, igual y eso material liviano que mueve a mi parecer tiene mucha experiencia asi que creo que esta bien (Y)
@zacblonien3 жыл бұрын
Well I’d hurry too if I saw that big fucking storm coming lol.
@shaun4085 жыл бұрын
No tread on the tires imagine that ......
@vince60563 жыл бұрын
Somebody is comfortable on their machine
@midialukombo32843 жыл бұрын
Bravo
@user-po5vq4xn3x2 жыл бұрын
فنان 👍
@fusofighterdumptruckkh50702 жыл бұрын
Legend
@lanetolasfederaller3175 Жыл бұрын
Helal ustama bundan sonra senin lakabın jet Fadıl
@Mud-N-Ice6 жыл бұрын
I was a hotshot to once. Raced around with an empty blade
@Mud-N-Ice
3 жыл бұрын
Me to thomas I was him once. So glad I can now Move material slow and steady make every pass count and I’m not exhausted at the end of the day.... and get 10 times more done
@74superglide4 жыл бұрын
Plot twist...the owner is in the driver's seat!
@aquaden8344
4 жыл бұрын
Yes, you must be right, only an owner on an ego trip is deliberate wrecking his own equipment to put on a youtube show.
@williamwalsh71286 жыл бұрын
To be able to carry a grade like he does at the speed he is going, you can tell this is not that mans first rodeo. He is buy far one of the best grader operators I have ever seen. As you can see he is good at high speed, and good at slow speed, and he knows when to slow down. Great job man your the best!
@LostAbroadVideos
6 жыл бұрын
As far as carrying the grade, the grader itself is doing all the work. You do not have to be a good operator to provide the result this operator is. The real issue here is the mechanical physics that are impacting the machine itself when operated at speeds like that. Every hard hit into the spoil pile can cause micro-fissures in everything from transmission gears to moldboard and circle pins, brackets, and cylinders. He would have completed the task faster had he articulated and side-shifted, pulling the load out with the tandems directly behind the moldboard and the fronts side-leaning on the last pass. He would have operated at a much slower and safer speed, saving the grader, and producing a better, more compacted result.
@gliderider7077
6 жыл бұрын
Lmao you must be the “operator” behind the controls... I would fire you
@mattkenney2637
5 жыл бұрын
This operator needs fired asap!
@emersonguimaraes55944 жыл бұрын
Liked.
@Chad-pb1dx7 жыл бұрын
I would fire that idiot site on scene. Inexperience at its finest. That is not how you operate a motor grader, its not a race car
@BenDover-ym5dd
7 жыл бұрын
I thought the same thing! What a dumbass!
@thomaspatten4470
7 жыл бұрын
Chad Klink Totally agree ! too fast and creating washboard.
@ConstructionMachinesChannel
6 жыл бұрын
Absolutely...thought the video was on fast forward at the start 🤣
@StanderGarage
5 жыл бұрын
yes bro ! ... is not a f1
@alimakization
5 жыл бұрын
Mind you seems as though the storm is rolling in ?
@midialukombo32843 жыл бұрын
Thenk you broh good job my friernd
@shahzadmahmood83602 жыл бұрын
This operator very fast working he is a spreading spreading fastly no problem last leveling is first and two gear finishing not a fastly and where are you from bro
@jonatabernardinibernardini96455 жыл бұрын
Com um tempo de chuva desse formado tem q agilisa ne.
Пікірлер: 536
Thank god for operators like this, they keep me employed
The real issue here is the mechanical physics that are impacting the machine itself when operated at speeds like that. Every hard hit into the spoil pile can cause micro-fissures in everything from transmission gears to moldboard and circle pins, brackets, and cylinders. He would have completed the task faster had he articulated and side-shifted, pulling the load out with the tandems directly behind the moldboard and the fronts side-leaning on the last pass. He would have operated at a much slower and safer speed, saving the grader, and producing a better, more compacted result.
@derek4real179
2 жыл бұрын
Gary Davis must be a union hand for sure
@azzoozaid5622
2 жыл бұрын
Je voie un sabotage de matériel
@tj_stroi9662
2 жыл бұрын
😔
@MJ-it8ru
2 жыл бұрын
can tell you're not an operator. he was running it like that to beat the rain that was about to start
You can always tell when an equipment owner is not present. Not only is the operator abusive, he's dangerous.
@gregoryhelton2408
4 жыл бұрын
Dumbass
@DonaldJPump24
3 жыл бұрын
Robert Williams no it’s called getting that shit graded before the next truck comes
@blauer2551
3 жыл бұрын
@@DonaldJPump24 there’s already 50 piles on the ground, he wasn’t in a hurry until the video started apparently
Wow! Listen to that motor labor. And see how it hops and the speed he hits those piles with? Yeah that’s a way to mess up a turn table or bend a moboard. This person would have lasted 1 pass working where I did. I would have sent him home after his first pass.
The sad thing is this operator likely feels that he is a good operator. He is NOT. He would quickly find himself fired from most companies I've ever worked for or known.
@AinaeIslam2023
3 жыл бұрын
So what do you think what wrong is he doing? Plz explain. Thanks
@bekirkarabulut4404
3 жыл бұрын
@@AinaeIslam2023 operatör is good.no problem
@liaquathussain2355
2 жыл бұрын
Yes u r right
@liaquathussain2355
2 жыл бұрын
@@AinaeIslam2023 I m also grader oprtr
@johnscrimgeour4888
2 жыл бұрын
@@liaquathussain2355 as bad as him? Hope not.
Bom de mais o cara manobrando a niveladora, tiro o meu chapéu a este grande senhor , trabalho com todas as máquinas mas com esta assim rapido nunca kkkkkkk parabéns
@gq-cw6xi
Ай бұрын
If you have never worked with one how in the fu ck do you know if it is good low IQ fu ck tard
Love these machines always wanted to run one
@trevorfillmore698
3 жыл бұрын
I am lucky enough to get a grader position at work I drove truck for 17 years local and long haul then 3 years I got on with the D.O.T amd love it applied for a grader job this spring and got it very deferent that driving truck slow and steady.
@bladehand2411
3 жыл бұрын
Love it been running one on a wind farm for last 8 months best thing ever
That operator must be some kind of COWBOY. I'd fire him after 2 passes if that were my machine...….
@ChaseLandMgmt
3 жыл бұрын
Good thing it isn’t, move along. Most over played comment on KZread.
@mostafizairtravels2625
3 жыл бұрын
@@ChaseLandMgmt ঠৃছংপূ
@user-yr4qz9jy5i
3 жыл бұрын
ช
@user-yr4qz9jy5i
3 жыл бұрын
ๆ
@martymorse2
3 жыл бұрын
He is skinning that mule.
Essa patrol e ótima muito boa ela
Take a drink every time someone says "fired" or some form of the word "abuse"
WOW!! Only a bosses kid could get away with equipment abuse like that and still keep their job
@harryscrotum007
5 жыл бұрын
Wheres the abuse exactly? I never heard any clanking or metal on metal I just see production. Its a pace your not comforable with and say its bad instead.
@cesarsenacorrea9332
5 жыл бұрын
Estas máquinas si que trabaliando
@ruthnorman1922
5 жыл бұрын
Freedom Of Speech that pace isn’t any pace that would be used on a real job. That’s dangerous and would be shut down instantly.
@jayskinny420
5 жыл бұрын
The higher gears he is operating at is not meant for pushing that amount of material.. I feel bad for that things transmission.
@georgecooksey1090
5 жыл бұрын
going as fast as he was is A. Unsafe B. Can damage the machine that isn’t designed to take the sudden impact C. Only makes for more passes to be made in turn meaning he is actually losing production time.
Save an hour, at the cost of $400,000....he would be fired his first hour here in the US
@teteira
4 жыл бұрын
Same here in NZ
@rbeck820
4 жыл бұрын
Same everywhere
@vc8506
4 жыл бұрын
He"s the only fella they could find.
The only time I've seen grades move that fast is when they are on the road or backing up to start over I'd not be surprised if he has wrecked a few transmissions.
@caneloguero
4 жыл бұрын
They have 6 gears forward and 6 in reverse.
@bensaadabdessamed9308
3 жыл бұрын
Don't worry, it's not a Honda accord
140 tem torque e pegada 😃👍🏼👏👏
UAU SENSACIONAL TÁ PARECENDO OS OPERADOR DE MOTONIVELADORA DAQUI DO BRASIL🇧🇷 FERRAMENTA😁✌
Driver- Hey bro film me!!! Friend - Well, promise not to kill me?
Lindo demais ver essa máquina!!
He made the grader into RACING CAR as i know 1st gear to 2 nd gear is advisable
Looks like this guy is working by the mile not by the hour lol
es un buen operador , se vee ke no es novato , pero la verdad esk si esta mal ala revolución ke lleva la maquina , todo modelo H, K , M por muy buenas ke sean rekiere de un buen manejo para cuidar el motor y no forsarlo y realmente no es un material liviano ,,,,,, cuando tengas algo ke es tuyo sabras VALORARLO , pero si no es tuyo te dara igual xk si ke te kema el motor sabes ke no lo pagaras ,,,,,, ay ke aser consiensia
@carlosduarte8585
5 жыл бұрын
Toca hacerle por que en una obra que le exijan rendimientos y no aceleras te bajan de ay
Un fenomeno complimenti
Quero ver um cara desses trabalhar aqui onde eu trabalho pura lage pedra e sem cabine e muitas abelhas e trabalhar só em primeira marcha kkkkkkkk
Adam harbiden kullanıyor abi. Helal olsun
Usta dediğin böyle olur MAŞAELLAH
O rapaz é bom..acho qui eles estavam com pressa por causa do tempo de chuva...material no monte é pior.depois de molhado demora um pouquinho para poder mexer nele de novo....
Adoro fazer trabalho com máquinas pesadas.
Cool video
Hurry up grader guy the paving crew will be here any minute. The line painter is already here waiting. Do a good job.
He’s definitely not an operator.
Great video on how not to operate a piece of equipment, let alone the most precise one of them all.
That’s no operator haha. Would never run my machines. Should be fired on the spot.
Maquinista caprichoso boa pratica
Abicim kimsin nerdesin nerelisin tanımıyorum ama yorumlarda İngilizler, İspanyollar sana övgüler yağdırmış. Yaptığınız iş vatani bir iş hatta öyle ki T.C Karayollarının web sitesinde ulu önderimizin bir özdeyişi paylaşılır ki bu özdeyiş "Gittim her yerde benden aciliyetli iki şey istediler birincisi yol, ikincisi okul" der.
Eski Cat seslerine hayranım. Birde bu sesin aynısından Bulzoder de de vardı ama hangi modeldi hatırlamıyorum
Show 👏👏👏👏👏👏
GREAT JOB!
عمل متقن اتمنى لكم حياة سعيدة
The operators good at making waves
Very good 👍
Greyder. This person can really spell. This guy driving the greyder is really doing a great job. I am impressed. Roll on big wheel.
Con un operador así Para que quiere enemigos se acaba la máquina en 6 meses andar rápido no quiere decir que es bueno lastima de máquina!!
@dotemichelblanchard1429
3 жыл бұрын
Bonsoir.conmen.tallèvous.moi.jesui.un.mecanicien
Obviously putting on a show.. No need to beat a machine like that. Good luck
@manuelgleder853
4 жыл бұрын
Mester
Good job ❤️❤️
O camarada é bom
Straight up he used to be a 6 way blade Dozier operator
I work for a hire company in New Zealand it’s operators like this that just make me want to go to work every day.Ya Na,they must have a good field service mechanic.
@blueange1s
4 жыл бұрын
So you condone to how this fuckwit for the way his operating heavy machinery, just so you can have work, fucken idiots mate
This is what happens when the grader operator calls in sick and the roller operator swears he can run a blade.
@johnnyd6641
4 жыл бұрын
LMAO I can see my roller operator right now!!
Hello Nice work dear colleague.
El andar rápido no lo hace el mejor operador, el ojito de la empresa para contratar un destructor de maquina ojala le dure para que pueda trabajar otro día.
Must be near the end of the shift the way he is beating on that machine. Must have high overhead paying your CAT dealer for parts.
Cat é cat ne pai!!!
No wonder his damn tires are bald lol, hits the loads at 90 mph
Love all the high vis gear being worn by the tyre kickers. very hazardous work site,
خوش كريدر وخوش سايق
That's good job friend
Excellent work, that soon shifted maybe 300 tons of gravel. There is a reason why the graders have so much Horsepower, you might just as well use it.
It takes a lot of experience to operate the grader like this, he operate the equipment like a car lol.
@evanstonbalce9588
2 жыл бұрын
Patience too
I'm glad that grader operator does not work for me. He's abusive to that machine. It's only a matter of time before he kills somebody or, destroys that machine.
@caleblarrabee8071
8 жыл бұрын
+Miguel Grande That's right. I thought it was just me thinking that until I saw your comment!
@panhead55
8 жыл бұрын
Yep, he's a jackass. Wait til he backs over someone trying to be a hot rod.
@wedoitmjrslice
7 жыл бұрын
speed is good if you are good but he is way to hard on the equipment.
@eliseferrari8510
6 жыл бұрын
idiot wouldn't last 5 min working for my dad
@testlord4321
6 жыл бұрын
Miguel Grande و .
Ya quisiera verlo todo el día al mismo ritmo
@pedroschoffen2624
3 жыл бұрын
Sobre esa maquina no es problema.. los comandos permiten trabajar muy comodo.. una vez que uno se amaña puede trabajar todo un turno asi sin problemas
@eduardosoto7224
Жыл бұрын
Se descompone la trasmisión porque el torque es muy forzado anda atacando como en tercera y solo se ataca en primera y segunda se acaba Haci el equipo
Спец на грейдере👍 видно что опыт есть за спиной.
Este operador, apesar de que el material esta suelto, se desplaza con mucha rapides y esta realizando el trabajo triple veses, por otro lado, trata muy mal lamaquina.
Parece a pessoal aqui quando vai chover.
ENXADA AMOLADA 👏👏
Looks like fun I like the contrast of the two types of rock you can come grade our drive way anytime just let me make sure the kids are in the house
@truckertom3323
5 жыл бұрын
lol
@raymondswarmer1433
4 жыл бұрын
I wouldn't let him grade my manure pile
Corrugated iron comes to mind
he want to breakdown the machine .....this fuckin operator must be fire
I remember my first time on a grader.
Esse ae sim em enchada amolada
Did someone told the operator he had to do the job in 8:13 or he dies or his state would blow up or something? God the amount of abuse....
@adeolamorren2678
5 жыл бұрын
He is also burning a lot or fuel by going that fast
He should be a machine tester for Cat
Muy buena maquina pero ay que cordinar al ch3cador para que pongan bien lod viajes de material3s para no forzar la maquina y no consumir mucho combustible y rendir en avances
Отлично работает!
What ever happened to chaining your tailgate and spreading? Or a spreader box , or bottom dumps ? Inefficient material placement.
سائق قريدر فناااان
Bom demais
good job
Très bon travail.
spirit of success ❤️ semangat sukses 🧡
o cara e bom
Nice
Almost everyone got a problem with the operator's speed,I have a problem with them using a grader like a d9 with a rock box.putting down that much material should be done with a dozer and a rock box.its not even close to final grade yet.
Ustura gibi kesiyor malzemeyi operatör harika
He's not even pitching the blade over to roll the fill. I'm sorry I'm at a loss of words here. That engine is gonna blow out by the way.
Great
hace el trabajo rapidamente y no veo q esfuerse mucho la maquina, igual y eso material liviano que mueve a mi parecer tiene mucha experiencia asi que creo que esta bien (Y)
Well I’d hurry too if I saw that big fucking storm coming lol.
No tread on the tires imagine that ......
Somebody is comfortable on their machine
Bravo
فنان 👍
Legend
Helal ustama bundan sonra senin lakabın jet Fadıl
I was a hotshot to once. Raced around with an empty blade
@Mud-N-Ice
3 жыл бұрын
Me to thomas I was him once. So glad I can now Move material slow and steady make every pass count and I’m not exhausted at the end of the day.... and get 10 times more done
Plot twist...the owner is in the driver's seat!
@aquaden8344
4 жыл бұрын
Yes, you must be right, only an owner on an ego trip is deliberate wrecking his own equipment to put on a youtube show.
To be able to carry a grade like he does at the speed he is going, you can tell this is not that mans first rodeo. He is buy far one of the best grader operators I have ever seen. As you can see he is good at high speed, and good at slow speed, and he knows when to slow down. Great job man your the best!
@LostAbroadVideos
6 жыл бұрын
As far as carrying the grade, the grader itself is doing all the work. You do not have to be a good operator to provide the result this operator is. The real issue here is the mechanical physics that are impacting the machine itself when operated at speeds like that. Every hard hit into the spoil pile can cause micro-fissures in everything from transmission gears to moldboard and circle pins, brackets, and cylinders. He would have completed the task faster had he articulated and side-shifted, pulling the load out with the tandems directly behind the moldboard and the fronts side-leaning on the last pass. He would have operated at a much slower and safer speed, saving the grader, and producing a better, more compacted result.
@gliderider7077
6 жыл бұрын
Lmao you must be the “operator” behind the controls... I would fire you
@mattkenney2637
5 жыл бұрын
This operator needs fired asap!
Liked.
I would fire that idiot site on scene. Inexperience at its finest. That is not how you operate a motor grader, its not a race car
@BenDover-ym5dd
7 жыл бұрын
I thought the same thing! What a dumbass!
@thomaspatten4470
7 жыл бұрын
Chad Klink Totally agree ! too fast and creating washboard.
@ConstructionMachinesChannel
6 жыл бұрын
Absolutely...thought the video was on fast forward at the start 🤣
@StanderGarage
5 жыл бұрын
yes bro ! ... is not a f1
@alimakization
5 жыл бұрын
Mind you seems as though the storm is rolling in ?
Thenk you broh good job my friernd
This operator very fast working he is a spreading spreading fastly no problem last leveling is first and two gear finishing not a fastly and where are you from bro
Com um tempo de chuva desse formado tem q agilisa ne.