I replaced the battery on my GBX-100 & 4 little Gold Screws fell out. This video help me find the screw replacement even though you didnt go over it.. Thank you! 6:07

Appreciate the video and detailed macro of the components, really tempted to pick one of these up.

Thumbs up! Really admired your clean dissembling & assembling each watch! Thanks for the video bro....

What a watch! Have my first Square in for review this week, its really a tester to see if I'm going to like the shape so I can buy a GBX 100

I LOVE those teardowns! Nice quality!

This is madness!!! Very nice man!

Superb videos, really enjoy your teardowns. 👍 Nic

Always love to watch your videos. Greatly appreciated 🍺🍺

Brilliant video, exactly what I needed, I’ve just bought this watch and am trying to find a black bezel to swap out the ss one it comes with, I can’t source a black one at the moment but at least I know how to swap it now, thanks loads, I’ve saved video and will watch many times and with pause when I come to doing to slight mod, now I’ve got to find a black one!! Cheers mate 👍🏻

Will be getting my GBX 100 this week, always a pleasure to watch your videos, I learned most of the stuff changing bateries etc from your channel, really awesome, keep up the good work.

A very nice choice of the BGM

waiting for it. many thanks.

This is the video I was looking for, thanks. I like the design of the GBD 200 but the features want to be like the GBX 100, whereas in this video the GBD 100 is the same as the GBD 200.

Cool! You've just discovered 2 ultimate beaters. A beater is great as a cheap replacement, but parts replacement is even better! 👍

Amazing video!

Very interesting clip. Thanks!

Great Job...Regards from Spain (Barcelona)

I have the gbx100 and that's fantastic to know I can use the gbd100 LCD screen.

Hey, can you make an strap replacement tutorial for GBDh1000 and where to order replacement band. I wanna swap out mine, don't know where to get replacement part.

are there any after market watch case that would fit this module? in case the day comes when the plastic case crumbles to bits.

Amazing content. Subbed.

5:07 metal tool and battery 😲

@gshockhighfashion

Жыл бұрын

It'll drain the battery for a few seconds, No big deal at all.

I flooded my GBX-100, took it apart, dried it out, and it is working again but the backlight is dead. Do you have any ideas for repairing or replacing the LED?

Swapping batteries of this watch, would it affect the water resistance?

Thx for the vid. I hope we'll rapidly find metal colored replacements for the top bezel on Ali, as it's easy to remove.

@Chao-chao

2 жыл бұрын

I haven't found any replacement metal bezel yet. 🤔

@Thunderkorn

2 жыл бұрын

@@Chao-chao yeah same here I wanted a blue one

@JeffreyBarranco420

Жыл бұрын

Does this have replacement band available? Or none, any model that is compatible with its band/strap?

why is the screen on my GBX-100 not that bright? i bought it new..does it need new battery? thanks

Nice video bro

Absolutely amazing video, and quite scary for a non-technical person like me…

gj ! thx ! next is MR-G !

Please tell me how to set hourly chimes in this clock?

Does GBX 100 Has carbon fiber bezel ?? or different bezel than stock one ?

Where can I order the auto screwdriver from?

Can you post a link to that red screwdriver you have in the video? Thanks.

What type of battery does GBX-100 take?

what is the golden spring under the bezel for?

Whats the size of the screwdriver 🪛? To replace battery

Hi dare! Watch your channel often, am thinking of buying some more G Shocks but don't have the budget to buy new. Was wondering which seller you would recommend that's trust worthy I'm based in Dublin Ireland? Your help would be much appreciated!! Tanks P

Thanks

Is possibile replace only the glass?

Have you done a teardown of a gmwb5000 series?

I ordered this on Amazon, will arrive today By the way, I work at an Amazon warehouse

@joaquinpv7904

Жыл бұрын

No one interested on it mate

can someone tell me why this model is not avalaiable in many markets?

When it comes to disassembly, i really hate the plastic buttons. I bent the shaft of one during a bezel swap on a GD-100. Now I'm scared to try it on this guy.

Anyone on here have the GBX? Can't see from online manual if has weekend only alarm.

Saludos excelente rejol

Always thought if there is any way of getting sun, moon, tide data in other MIP display casios. If there a way, any hack you will find out first.

i dont see any quartz crystal.. is there any quartz in here ?

I just broke my side button yesterday during open my bezel though😅 luckily some g-shock sifoo helping me to attach it back with some mod..hmm maybe i pressure the bezel a bit hard 😓

@allskoolguru

3 жыл бұрын

hey man i ran into the same problem as you. i had to glue them back. babi sial punya design. how did your sifoo friend mod it?

What is the diameter of the strap?

i ran into some trouble with the side (display & mode) button when i was putting back the rubber bezel. both plastic buttons popped out and i had to glue them back on to the stainless steel buttons. please be extra careful when assembling them back

@tostada_gaming_93

3 жыл бұрын

Thanks for the tip/advice

@Leo-qs3dx

2 жыл бұрын

what kind of glue did you use?

@allskoolguru

2 жыл бұрын

@@Leo-qs3dx sorry for the late reply. super glue, 1 very tiny dot. good enough to hold the button. its been 6 months still good

I have a question if I disconnect the watch from the phone how long is the Bluetooth on permanently or switch it off maybe few minutes or did I have to activate the airplane mode

@allskoolguru

3 жыл бұрын

the bluetooth icon will remain blinking. i just activate airplane mode to disable it. im not using the watch for any notifications

@razakimohammad2954

2 жыл бұрын

That bluetooth blinking can be turn off once u unpair it on the watch, im puzzling at the first time too, but once i did that it settled...

Nice background music

thank you for the excellent video. i think, the vibrator work much. in the future, will it be replaceable?

@gshockhighfashion

Жыл бұрын

You'll need to do it yourself though, if you know how to solder tiny component on the board, should be doable.

Do you guys have any idea if the METAL BASE can be replaced ?? Thank you ! And REALLY COOL VIDEO!

@gshockhighfashion

2 жыл бұрын

The metal frame at the top can be replaced. Need to find a replacement part first.

@ToshiroCR7

2 жыл бұрын

@@gshockhighfashion hey thanks for your answer!! do you know where could I possibly get one ??

I did a reset on my Gshock G-lide, and it’s not turning back on . Any idea how to switch it on. Please help me.

@gshockhighfashion

5 ай бұрын

whoa, never had this happen before, if this happen to me, I'd just try to swap to a different battery again, and perform the AC again but hold it in place for like 1-2 seconds longer. Idk /why/how, sometimes it helps. Make sure you connect/touch the right AC connection point though.

interesting how different it is from the GBD-200

Can you write new bios in motherboard so then can be usedwith all possible pushers?

@gshockhighfashion

Жыл бұрын

I'mm not smart enough in that regards. I wish someone would do it.

I have a question, is it ok to press the button when the watch is wet ? Worry about water penetration issue.

@gshockhighfashion

3 жыл бұрын

Totally fine for 20bar WR G-Shock

@joonyeephan2908

3 жыл бұрын

@@gshockhighfashion thanks!

@joonyeephan2908

3 жыл бұрын

@@gshockhighfashion wondering why g shock now no more tough solar for master of G series, is it really easy to change the battery ourselves? Despite it's easy to do so, but still embedded the risk of water resistant issue once we dissemble and put back the back cover.

Can you swap out the GBX-100 to the GBX-200? For me I like the fact that the band on the GBD-200 has a metal buckle and Wrist Guards. The GBX-100 Has cheaper plastic buckle and no wristguards. I don't know what casio was thinking when they decided to go with plastic buckle and no wrist guard, well maybe I do? Its all about the Money and more profit and giving us a cheaper product. Greed eventually catches up. Thanks for sharing this video, it was awesome.

@JohnSmith-ef8nr

6 ай бұрын

Yes you can

How can this model be shock resistant without having rubberized parts like other g-shocks? It has a rigid, hard plastic bezel and a steel one at the front. Btw I have it and love it but it still concerns me.

@gshockhighfashion

2 жыл бұрын

G-Shock released a full stainless steel and titanium watch even back in the 90's. Look for MRG-100 as an example, that thing still just as shock resistant. GBX-100 like this should be fine.

@mariuszsch.79

2 жыл бұрын

@@gshockhighfashion Thank you! Also, I noticed that the ,,plastic" bezel is actually a rubberized material just like on classic g-shocks. The steel bezel seems to be laying on the ,,rubberized" one, so if there is an impact, I guess the rubberized parts still absorb the shock.

hallo, i want to ask, my watch gb 5600b , cant you tell me position led

@gshockhighfashion

10 ай бұрын

I didn't have that watch yet, so I'm not sure. You'll have to disassemble it first.

Double sided tape isn't my idea of refinement for an external case compnant. I'd call it more of a flaw.

Is it possible to make the MIP screen positive by swapping the polarizer?

@UFCPR

3 жыл бұрын

I don't think is possible. The dark areas are not reflective in this MIP display, that's what I heard.

I have a question Why is there no alert in this watch between hour and hour? Like Casio digital watches?

Positive screen mod, GBD-100 in positive mod is great!

@dhdkhdd6017

3 жыл бұрын

It's probably not possible with that kind of screens

Band dimension 16mm ? or 26mm ? (i think 23-24mm) thanks.

@gshockhighfashion

3 жыл бұрын

Lug size is 16mm. The width size that met the bezel is 27.3mm~

@yolo7145

3 жыл бұрын

@@gshockhighfashion thanks a lot dude

@2204pc

3 жыл бұрын

@@gshockhighfashion Did anyone try to wear the gbx WITHOUT WITHOUT WITHOUT the metal plate ? (for obvious weight reason) (is it wearable? is it not too ugly?)

👍👍

Did anyone try to wear it WITHOUT WITHOUT WITHOUT the metal plate ? (for obvious weight reason) (is it wearable? is it not too ugly?)

Did this one have a quartz oscillator?

@deanagoes2791

3 жыл бұрын

No..that watches using alien tecnologies.

@tostada_gaming_93

3 жыл бұрын

6:11 i think the metal piece close to the center of the board is the oscillator

👍

Saya punya pertanyaan, apakah pada strap jam tangan gbx 100 sama dengan ga 100 ? Karena saya adalah orang dari negara Indonesia

@gshockhighfashion

3 жыл бұрын

GA-100 band size is compatible with GBX-100 lug size. It is bigger, but it can still fit.

@pendekardaulay2448

3 жыл бұрын

Thank you for answering my question, but I want to ask another one, what strap is what is fit on GBX-100 other than the GA-100 strap?

@azlanzahari8232

3 жыл бұрын

@@pendekardaulay2448 salam masbro! sy dari Malaysia🙏 Option lain band boleh pakai pada gbx100 ialah dw5600 dan dw6900👍

Include a tough solar feature...if casio do this.. it would be the best ever G-Shock..

@JeffreyBarranco420

Жыл бұрын

It would be perfect if this has solar battery! 👌

You know he had to do it to em

Kinda sad that the GBX-100 isn't available in Europe and the GBD-H1000 is mostly sold out.

@gshockhighfashion

3 жыл бұрын

BUYEE to the rescue

Why did Casio use cross head screws on the watch when they could have used hexes? Looks so cheap.

❤️ ⌚️❤️🎥🙏

Done subscribe

(Starts ti taje bezel off) BEEP! (What are you doing)

Say goodbye to water resistant.

@tazboy1934

3 жыл бұрын

Wat about putting it under tap water

Gbx100 look better...not too bulky.... Should have tough solar ver. too! But normal batt. Version is already nice!...

Help?

Why in the world are you using automatic drill that will totally strip it out

@gshockhighfashion

3 жыл бұрын

'totally strip it out' LOL Buy one man, it is cheap. You'll understand why that won't happen right away. 😂

Idk, I was a bit scared

👍👏🇨🇴🇪🇦⌚

Nice video but this guy just doesn't reply to comments 😒😒🤦

Donne moi ta montre que tu porte

Never try this at home

First

This is the reason why we are seeing alot of "C-Shock" in the market nowadays. Casio pls take some legal action to this guy. He is also selling merchandise under "G-Shock" wordings and photos which are totally not in compliance with.

@SoBek49

4 жыл бұрын

I don't know anything about the selling of trademarked merch,, but are you serious about your first point? This is literally just a teardown. Are you not in favour of personal mods and the ability to change parts yourself, as in the "right to repair" of the stuff you've bought and own? It just shows the love for the product, no-one this interested in it will buy the knock-off versions anyway. And if you really think someone would copy a design based on a video like this, and not their own research and teardown, you're dilusional.