Carved the USMC emblem using the
I decided to carve the USMC emblem. I used two bits. I used 60 degree vbit and a 1/4 down cut end mill. I first used shellac to help hold down the oramask then proceeded to carve. I believe a new 60 degree vbit is needed as it did not cut the oramask cleanly and contributed to tear out, but I still had decent results, enjoy!
Пікірлер: 53
Awesome work!!!
@encarwoodworking
3 күн бұрын
Thank you so much 😀
Great little project! i'm starting to use MDF more in my carving project. Seems to work really well as long as you seal it and a newer bit does help. As always, thanks again.
@encarwoodworking
4 ай бұрын
Thanks Ron! I like mdf too much.
Project looks fantastic. Semper Fi!
@encarwoodworking
Ай бұрын
Orraah!
Great job looks great i have been carving a lot of cherry with my CNC I will have to try MDF again its been a while
@encarwoodworking
17 күн бұрын
I like MDF a lot since it is inexpensive, but it is hard on the bits. I appreciate you watching and the kind words!
Looks great!
@encarwoodworking
4 ай бұрын
Thank you Brandon! I appreciate your kind words!
Beautiful, nice work. Just got my Onefinity and just subscribed to your channel.
@encarwoodworking
4 ай бұрын
Thank you for watching and subscribing! You will really enjoy the CnC and make wonderful things.
Nice job. Just got my Woodworker Elite. New subscriber.
@encarwoodworking
4 ай бұрын
Thanks for watching and subscribing Kevin! You will enjoy your elite. I think eventually I’ll do the upgrade to elite.
Lovely result. You are putting your machine to good use. Did you creat the vector yourself?
@encarwoodworking
4 ай бұрын
Thank you! I did not create the vector. I honestly don’t remember where I got it. It might have been from thingiverse or the numerous FB groups I follow.
Awesome
@encarwoodworking
4 ай бұрын
Thank you for watching and the kind words!
Je débute en cnc et quand je vois réalisé ce projet magnifique et surtout en mdf et votre papier collant (je sais pas ce que c'est comme papier) je me dit vivement que sa arrive chapeau M l'artiste.
@encarwoodworking
21 күн бұрын
Bienvenue dans le monde de la CNC. Je sais que vous apprendrez et réaliserez de grands projets. Merci d'avoir regardé !
@totoffe6234
21 күн бұрын
@@encarwoodworking Excusez moi j'ai une petite question c'est quoi le produit ???? que vous mettez à 0:23 de la vidéo Merci d'avance pour votre retour.
@encarwoodworking
21 күн бұрын
C'est oramask 831 (a.co/d/amj4gtr).
@totoffe6234
21 күн бұрын
@@encarwoodworking Merci mais page introuvable
@encarwoodworking
21 күн бұрын
Désolé, le lien ne sera pas publié pour une raison quelconque. Il vous suffit de rechercher oramask 831 dans votre navigateur ou sur Amazon.com
What bits did you use to make this? I have a friend who is a Marine so you definitely got my attention with this
@encarwoodworking
4 ай бұрын
I appreciate you watching the video!! The bits used were a 60 degree vbit for all the lettering and graphics then a 1/4 down cut end mill for profile cut
What exactly is the blue film you used? Semper Fi. RVN 30MF11
@encarwoodworking
29 күн бұрын
So sorry for the late reply. It is oramask. I got it from Amazon!
👍
@encarwoodworking
4 ай бұрын
Thanks Pete!
I am an old Marine and I have an Avid CNC. Would it be possible to get a copy of the G-code you generated? Thanks in advance for your help. Good video.
@encarwoodworking
2 ай бұрын
Ooorah! I tend to clear my thumb drive of the G codes but I’ll try to find if I have it.
@RayWest-su5xn
2 ай бұрын
Thanks sir!
@WabiSabiCustomsLLC
2 ай бұрын
Any luck for a Salty Dog?@@encarwoodworking
@iwannaapple7190
2 ай бұрын
@@encarwoodworking Just in case you ever want to do it because you deleted your files of your thumb drive, you might want to know that you really didn't and they can be retrieved. You can think of it as putting your foot in the mud. Your foot may not be there anymore but your foot print still is. It easy to google the code...or it used to be anyway.
@encarwoodworking
2 ай бұрын
@iwannaapple7190 that’s good to know. I’ll try to hunt it down that way
Where can I find the file?
@encarwoodworking
4 ай бұрын
To be honest with you Mark but I don’t remember 😭. But if I had to guess it would be from one of the numerous FB groups associated with CNC/Stl files etc. sorry I couldn’t be more helpful
Should be 03mf11
It's not a carving project if the machine does the carving it's a cheap Chinese type of product. That's all it is.
@encarwoodworking
4 ай бұрын
I appreciate you watching and opinion either way!
@rickenterkin4720
2 ай бұрын
Bro, why you so mad. You mad cuz you don't have the tools to do it? The machine to do it? The know how to make the machine carve it out? You mad cuz his hustle is better than your hustle? Poor guy.
@encarwoodworking
2 ай бұрын
@rickenterkin4720 I appreciate you my friend.
@rickenterkin4720
2 ай бұрын
@@encarwoodworking I want 1 of these so bad. So much potential. Keep up the great work ole son. Enjoy the videos. GOD BLESS.
@encarwoodworking
2 ай бұрын
@rickenterkin4720 thank you! 😊