got that right, man! it's pretty hard to find a worse welder than me. i'd be starving if i had to survive on this for a living!

@josueromero4728

5 жыл бұрын

El peldaño

@bhuchansingh

Жыл бұрын

Keep supporting my channel #bhuchansingh

Inspirational! Just what I needed to start my own recycled Christiania style bike. I remember seeing them in Copenhagen for the first time and just being blown away. Thanks for sharing. Much love from Australia

Nice demo - thank you - good to see you having a bash with the welding. May I ask if you actually used bearings on the pivot tube.? I am considering building a modular trike myself. I think they are brilliant. I daresay people like myself have gleaned a great deal from observing your build. Very generous !

Thumbs up to you and your kids. I think that considering what you have to work with, you seem to find a way to make it work, I admire that, not everyone has the money or the top of the line tools to get the job done, so us do it yourselfers make things work the best way we can, it may brake, but we fix it, or engineer it better. I also have sent many bicycles and parts to Africa and am happy to see bicycles in use. Keep up the good work.

@Strangernightg

7 жыл бұрын

michael carson Hey that was well said even if what you wrote was a year ago . Peace and much respect to you !

congratulations,, you are awesome job... yess. dammmm from venezuela

Beau travail, merci !

With that steering pivot, all you had to do was to brace it in three directions, from the lowest point to the bottom of cargo box. The bracing would be two side bracings and one front bracing, that would have held that pivot . You used a an unbraced Colum effect which pits a lot of lad on the base but if a column is braced as a high communication mast normally is then that would have held at any load. The braces would be able to take compression and tension so they would be pipes. and no need to weld them just crew them in. at about 45 degrees will do. .

What an awesome video! Great quality/production, excellent storytelling, super informative. Helping people in need with cheap, clean, simple transportation. You captured your family, your community --your life-- beautify. Inspirational on every level, thanks for your efforts.

@bhuchansingh

Жыл бұрын

Keep supporting my channel #bhuchansingh

top marks for effort mate , keep trying you will get better at it

ficou perfeito parabéns felicidade amigo

Very nice. I'd probably use my everlast mig welder if I attempted this project for myself.

Wuauuuuu bery smart man tanks for your adia

If every weld did that much good where it is needed this would be a better world. Respect!

Thsnk you as i am going to be building a few my self. And this helps me look at things to not do and things to try. Thank you for your trys and headaches.

@ebrohaugh

3 жыл бұрын

Thanks for your kind words!

parabens cara voce e um mestre das invencoes.

Fantastic helpers, GOD BLESS.

Make it easier for them, I can see six rear gears, make them operational, it's easy. I would also try to find crank arm with three speeds. That bike could go pretty much everywhere you want it to go. But nice job, I'm gathering ideas for something like this.

Wish my kids would build bikes with me! COOL!

Dang I wuna see more vids like this... cool stuff guys.. can only improve from the first prototype....

Two thumbs up for building something useful from scrap. Well done, considering what you had available to work with. I think the cargo platform might be more useful as a trailer that attaches to the seat base tube on a "normal" bicycle with a goose-neck type hitch.

@rolfpoelman3486

5 жыл бұрын

I am sure that it is always better to have an eye on the load when it's in front, when riding.

All my respect for the hard work. i think you should have put the tire closer to the steering bars I think there is too much weight on the center and nothing there to reinforce it.

Dude, sick build.. Hows it working out? Do you still have it? This video was published like 5 years ago lol

Legal a iniciativa!!!!

That's awesome, haha! Love it!

Молодец👍руки с правильного места

Those are some smart kids :)

How did the final mod hold up? how about switching the head tube pivot for a car wheel hub set up? I've seen it done on swing away rear tire holders, held up even with the weight. Also great to see bikes being put to use, I worked with a collective in Chicago and we used to send containers full out to africa. looks like awesome fun!

Muito bom. show

how is it going? is it working good now? good job!

Great Job! :)

ficou bom rssssss valeu

Very nice

It's still kicking around doing the job, but I prefer my newest build - a long tail cargo.

@rolfpoelman3486

5 жыл бұрын

I prefer watching the front load in my Long John.

Also on the christiana type trikes, the rear pivot is angled to help make the steering less twitchy

My inspiration for this bike was the Christiania style bikes that you see roaming around Copenhagen - they have two wheels in the front that swivel. I also might add a rear cargo rack to increase the capacity.

@artgasgv

6 жыл бұрын

se você quer que pare de quebrar neste lugar da direção deve colocar molas nas rodas para quebra o impacto com os buracos assim diminuirá o atrito que a direção recebe. vc esta de parabéns!

e ai jovem já resolveu o problema deste pino central?

you're the man

Specially with the older cargo bikes the bottom side of the steering pin has a support strip to the sides of the loading area. The joint has to take the big lever force between the passenger and the cargo.

😂😂xe đẹp lắm Anh ơi ❤️❤️

O BOM E USAR GARFO DE BEICICLETA DE CARGA ANTIGA OU DESSAS DE AMORTECEDOR NOVOS MAIS TEM QUE USAR UMA SOLDA MIG OU TIG POIS E MAIS RESISTENTE E NO CASO DE LEVAR PESOE BOM FAZER COMO VOCE FEZ POR UM PARAFUSO DE REFORÇO POR DENTRO MESMO ASIM SUPORTA TRANCOS MAIS UMA PAREDE MAIS GROSSA NOS METALONS ABAIXO VAI DAR MAIS RESISTENCIA AO PROJETO E DURABILIDADE MAIS FICOU LEGAL

Gap yoq 👍

eh?you're cutting with hacksaws and handsaws?what happened to the effortless two second job of using metal cutting chopsaws and angle grinders?guillotines?reciprocating saws? and so forth?

@ebrohaugh

Жыл бұрын

Right on, man! I'm taking any and all donations of chop saws, guillotines, and waterjets!

good job!!!

a very wonderful video

Ты молодец, veri good

Given how old this is, my comment is for other viewers..Welding on hardened steel like bearing races doesn't work, it cracks. What I did was use the entire forks of a bike and weld the forks to the metal, not just the pivot. hope that makes sense.

like it!

Aptera.....cool

Amazing..,bro,.....

Nice

me gusta su trabajo,soy de chile yo hago triciclos que le valla bien hermano buscame en youtube fabrica de triciclos y bicicletas

good thing hes wearing hes steel toe boots and leather gloves 👍

dose kid a very good

Good job 👊

But that’s very good ingenious

nice bro🤔 you're the man

There's a problem. The contact point between the cargo and bicycle body should be flat enough to tolerate weight and steering so you have to make a flat ball bearing base ..the is the only solution to avoid breaking of welding at contact point .

Much easier to just make a side-car. No mods to the bike, just place the 3rd tire in the correct spot. No added weight to the steering. Add a pillion seat and a single pannier (saddle-bag)

@rolfpoelman3486

5 жыл бұрын

Where does the pillion seat go, behind the bike or in front, or beside ie on the sidecar?

Hello, thanks for sharing this idea. I tried to produce something close to this and I find out that the rider almost fall off sideways when they do a sharp turn. How did you solve this problem?

@rolfpoelman3486

5 жыл бұрын

Is that the problem with all tricycles?

@rolfpoelman3486

5 жыл бұрын

If the rear frame can lean over into turns, would that be possible?

good kreytew maind

A uma esmirilhadeira ia ajudar muito em

nice work

Nice bro

grandeeeeeeeeeeeee

gud job god bless

Projeto falido infelizmente... mas gostei muito do vídeo.

,,,,,,,,GOOD JOB,,,,,,,

yu cann add bering.. on bucket.. can strong...

Considering where you are you have quite the styling shop !! You weld like me but what the hell eh ? What were your plans ??

Kreatif sekali

Hello, I'm really interest in to the project of building cargo bike in Ivory Cost. Can we tall about how you can help me on this project? Looking forward to your answer.

@ebrohaugh

6 жыл бұрын

sounds great! how can I help?

Show 👍👍

I really want a Christiana Box Bike but I don't have $2800 to spare. I'd love to try to build one myself. Is yours still doing the job?

Good morning can you give me driving how can I make home tricycle for cargo

Cool

Nice performance

Будь здоров!

Very naice

Factory onde bike tome womam model

Best

Brasileiros, reajam!

Sir Can u give the sketch of these?

Sujeitinho ruim de serviço aonde esta quebrando tem que ter 2 travessões 1 em cima outro em baixo ok.

👍👍👍👍👍👍

Prefeito

Knowlege for every humain in the earth

Very nice. Pls share the dimensions and your contacts pls

Tem que ser atraz, para puxar ! Empurrada não presta

Me inspiras, pero a la vez me haces sentir que he sido un inutil.

No offence but you need to learn how to weld because well first off your not holding a beed that tacking won't hold very good second stick arc thats only for heavy metal you need. Like a flux core mig it would be alot better and you can do alot more with it.. But good vid i dont want to sound mean just try to get a better welder

@ebrohaugh

9 жыл бұрын

Derek Graham Thanks for the advice. I've actually improved quite a bit since then. It is tempting to use a flux core (in fact if you send me one I'll use it!), but stick welding is king here in africa and I'm wanting to see developmental change (like folks making bikes like this to use as a small business, etc) from the inside and hence need to work with what they have. When in Rome, ...

@DerekGraham777

9 жыл бұрын

Holy shit your in Africa ok arc is good

Use a plate from a over stuffed swivel chair

Sloppy welding job... and the video cuts to much, so some solutions or problems are not talked about.. am i wrong ?

@ebrohaugh

7 жыл бұрын

no, you're probably right

bonjour je travail avec des velos porteur pour des personnes handicapés, et au niveau de l'axe sous le plateau mobile il y a un amortisseur de direction (style hydraulique) posé a partir de l'axe fixe jusqu'au plateau mobile. (super machine). Hello I work with bikes carrier for people handicapped persons, and in Level of the axis under the mobile tray(plateau) there is a shock absorber of Direction(Management) ( hydraulic put style) has to leave the fixed axis up to the mobile tray(plateau). ( Great machine).

We call it is "becak".

Keep supporting #bhuchansingh

basico y al punto!

LIKE LIKE LIKE

Your nice baby

Watermelons dude!

علي محمود