Carbon Bike Paint Giant Propel +DIY
Тәжірибелік нұсқаулар және стиль
How to paint a carbon bike with a single fade. That`s what I show you in this video. I have done also a little DIY if you want to paint your bike at home. Please find the stuff I use in the description below:
Check also my daily stuff on:
Instagram: / etoe.designs
Facebook: / etoe.designs
US links (European links underneath):
Montana Gold shock black: amzn.to/2sIMU2I
Montana Metallic Gold: amzn.to/30BzDoQ
Black Primer: amzn.to/2sHuvDm
1K Clearcoat Rustoleum: amzn.to/2G0umOt
1K Clearcoat Montana Varnish: amzn.to/379koWU
2K Clearcoat. amzn.to/35EX8hW
sand paper: amzn.to/33bihPD
masking tape: amzn.to/2Oe0nr2
fineline tape: amzn.to/36DkCom
scuff pad: amzn.to/2FK4ru0
EU links:
Montana Gold Shock Black: amzn.to/3646ROV
Montana Metallic Gold: amzn.to/2RvG0pN
Primer Schwarz: amzn.to/38hHSJB
1K Clearcoat Nigrin: amzn.to/2R5KowE
1K Clearcoat Montana Varnish: amzn.to/2tnzt8L
2K Clearcoat: amzn.to/2QNFB2R
Schleifpad: amzn.to/2XLGOJN
Schleifpapier: amzn.to/2QNeNAm
Abklebband: amzn.to/2pK5FRG
Fineline Tape 3M: amzn.to/2NiEjuA
Fineline Tape: amzn.to/36yoyqo
disclaimer: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. You have no extra cost using these links. You help to support the channel and allows me to continue to make videos like this. Thank you for watching! If you are interested in bike design, please visit also the website www.etoe.de/ Painter: Martin Grey
#bike #carbon #roadbike
Пікірлер: 265
I can't believe I spent 22 minutes watching a video about painting a bike frame. Then again, it was that good.
Awesome, Martin! Simple yet elegant. I love the fade effect.
As always, great video Martin!!
I think I could listen to you talk for hrs. Love the channel TY 4 time put in.
@kittrickriverastorage6530
4 жыл бұрын
Me too. The way he speaks makes his vids fun to watch.. Kinda like a fun dad
Excellent. Thanks for your work. I learned a few things. Keep up the good work.
Your are creating the best online diy painting video. Thank you !
You are very talented. I hope one day i can paint my bike as well as you can. Great content. Also that beard is looking pretty cool.
Du bist einfach ein cooler Typ, schaue seit Stunden deine Paintjobs an...
Great job as always Martin. Thank you.
Love your videos, I'm gonna do my carbon bike soon following this
Thank you for sharing your experience. I loved your work .
You just earned another subscriber, your videos are very informative and you drill the. Fact the preparation is super important.
Love the gold/black fade - classic
Love this man! So keen to paint my bike now
Love that colour gold fade.
Great video Martin! I can't wait to try it myself. I'm ordering the material off of your description list.
@ETOE
2 жыл бұрын
Have fun!
Love your job man!! So eager to repaint my toybike!!
Excellent! Loving these remarkable videos 👍💥
@ETOE
Жыл бұрын
Thank you.
super dope martin..!! amazing !!
I'm Japanese.I have painted my PROPEL this year. This video is very very interesting 😍 I'll subscribe to this channel!
@ETOE
Жыл бұрын
Glad you like it.
I watched your videos and sprayed a masterpiece… thank you!
@ETOE
Жыл бұрын
You are welcome.
Luxurious Color...amazing !!!
Love watching your videos. I will be doing Merckx Emx frame in few months and I think I need to remove two layers of paint as it has already signs of non standard paint 😂
awesome paint job.
기능력 Up. 기술력이 세계에서 ☞최고☜ 이신것 같습니다. 대단하십니다. ※파이팅※
@kaywoodparsons1874
4 жыл бұрын
for sure
Thanks for your Video's Martin. You are saving people lots of $$.
Hi Martin my giant defy look the same as the propel when you was half way from stripping the paint . I find it very hard to believe it can get a more difficult bikes to strip . Wanted to respray black and gold so I’ll try to copy the fade effect cheers ivor
Hey love these videos, it has inspired me to spray paint my helmet ⛑️. One question.... How long do you wait after spraying to wet sand?
Love your videos, informative and entertaining! I am attempting a bike paint job with my son using Montana paints as per your videos, it’s an aluminium frame but I’m not sure which primer to use? Do I need an etch primer and then 2k for a white base? I want to avoid any reaction from the primer to the top coat. Thanks!
Great job!
I love the color
Hey bro.i want my carbin bike painted.really love ur work.
Very nice, Martin. I'm really learning in every video you post lately. Maybe you can post a link of that die cut vinyl cutting machine or the something like it. Thanks.
Nice bike!!!
You are just amazing!
@ETOE
Жыл бұрын
Wow, thank you!
Very very nice....Greetings from Italy
Brilliant video, can the frame be sprayed with matt/satin clear cans or would it not work with the metallic ? I like the fade metallic but like matt/satin black frames too. Cheers Matt
that really is a beautiful paint job... I'd like to paint my bike but .... I'm a disaster at painting anything.. maybe I'll get some "junk" bikes to practice on ... amusingly if my bike was already bright orange I'd be quite pleased indeed.
After you apply your clear coat (2k), would you be able to wet-sand any orange peel out and then polish out to a haze free finish? Coming over from automotive painting and would love to try my hand on a frame!
Очень ловко! Лучшее по вело малярке!
magnificient paint job....
Your videos are epic due to two reason (in the following order): (1) dad jokes, (2) paint jobs.
I gonna try it to my frame
Can you make a video about your gun/air brush set ups and your air compressor set up 👍
Greg van Avermaet’s bike 😍😍
On several videos you mention not to turn the object rather paint around it. What's the math behind this ? Dust ? I'm going to build a smal aspirator panel and I was thinking to rotate the frame in order to spray always in the direction of the aspirator. Thanks Martin, I've already learned a lot!
Like two colors gold and black in mi Kona blast model 2000 year, thanks master
Does the black primer serve as a base code or do you need a separate base code before applying the gold color? Thank you!
Great video !! any tips to center logos at the same place on both side of the frame?thx
@ETOE
4 жыл бұрын
Using a ruler or measuring tape is a good idea.
With the 2k is it best warming the can before applying. Could you link the gaffic paper to use .
I like your videos , specially of your any kind of frame...can i have one🤗 Shout out sir..
thank you!!!
Martin! Great videos. I have a Specialized Tarmac frame I intend to paint, and would like to maintain the UCI cert logo on the seat tube as you have in this example. What did you use to protect the logo when removing the original factory paint? After applying the first layer of protective clear coat, what grit sand paper do you use before applying the 2-part final clear coat?
@timmannchicken
3 жыл бұрын
I have the same question, but from watching some of his other videos, I think the recommendation is to not keep factory logos, as they may bubble (air) when you try to paint over/around. Some of his other videos, I think he said 800 grit wet sand paper
thank you for sharing
@ETOE
3 жыл бұрын
Thank you for commenting.
Super nice Video. If not the best I have seen so far. Im thinking about a new paintjob for my bike. What temperatures are suitable for a good painting? Since I have to do it underneath my roof (or outside) without hetaing (in the fall/winter).
@ETOE
Жыл бұрын
25 degree Celsius
Hey. How long after painting can the film be removed (oracle)
Great stuff. Eighty four hours - Achtundvierzig Stunden :)
Thank you!!!!
Hey Martin, quick question if you wanted to thin some montana gold paint to stray through an airbrush, what would you use?
@ETOE What do you use to degrease the frame? Nice Video. Keep up the great work. ;)
@ETOE
4 жыл бұрын
Degreaser.
Have you painted any MTB forks? Could you make a video about that if you ever do that? Thabks
hi im a new subscriber here from the philippines.. , why you didn't use a chemical paint remover on your frame? hoping to your answer and your advice, thanks, more power to your YT channel..
Hey There. Do you wet sand prior to putting the vinyl mask logo on? And is it possible to wet sand metallics? Also, what do you clean the paint with ? And what vinyl do you use to make logos? And one last question, Do you polish after you clear?
Nice idol 😊
Ich feiere deine Videos jedes Mal. Vielleicht kannst du ja mal ein Video zu Candy Lackierungen machen!?
@tinoschmidt6316
4 жыл бұрын
Ok ich sollte warten mit dem Schreiben bis das Video zuende ist..!
My letters are very difficult to remove. Can you recommend a masking letters that remove easily?
Do you need to wet sand between the 2K layers? And do you need a final wet sanding, buffering or so for a perfect finish (to remove orange peel for example)? We are planning in making a video of bike built including custom painting and your channel is such a big inspiration/reference for us!!
@ETOE
4 жыл бұрын
If you are a bad painter you need a sanding to remove orange peel. If you are a good painter with lot of practice you need no sanding.
@dadandme
4 жыл бұрын
@@ETOE I see, we'll try to do our best. Thanks!
Great video ! Interested to know which kind of degreaser you use, exactly.
Hey Martin. Love your Content...Thank you. I got one simple Question. How do I remove old paint from nearly impossible to reach (properly) areas on a fork/ frame ? Near the dropouts of my fork the are little recesses I simply cannot get into with standard sand paper. The parts are bonded aluminium into the carbon legs of the fork...so technically I could use a paint stripper....any other suggestions?
@chewbacca848
2 жыл бұрын
I wondered the same thing. I thought I could use my mini sand blaster but it wasn't strong enough. Or maybe a buffing wheel? Or maybe I should just ask my girlfriend.
@edwardlow667
2 жыл бұрын
@@chewbacca848 If you can get your gf to do it...go for it! ;) I did use the chemical paint stripper and protected the adjacent Carbon with Aluminium foil. Needed about 2 to 4 applications cause you never get it perfect 1st try! I used an old toothbrush to get the little particles out of the crevices....Frame turned out great
Hi, Great stuff! How long you say that colors in aerosol cans last, once taken in use? From your way of saying it, it sounds like it's longer than 48h like the 2K stuff.
@ETOE
Жыл бұрын
Approx 2 days.
Is there any sanding required between coats and clearcoat?
Is it really that hard to get the frames bare to avoid the time consuming sanding process?
All nonsense aside, you can't just pop out with that level of pun, without knowing some hella fine English. Well done.
Which is the exactly gold color on can spray used on client’s bike because is different gold color used on tube. I know you used a compressor system to paint the bike but this gold color could be funded on cans spray?
Martin, you are the best, love your videos and I'm so impressed by your craftsmanship. I got hooked when I found your Canadian themed Trek by accident, and I'm not even Canadian. I have always done some diy spray painting in the past, but I feel like I am gaining so much knowledge while watching your videos. I wanted to ask you, I am about to undertake a Giant myself, and I'm wondering how long I can you leave the decal sticker before I peal it off to do a clear coat? I know if I leave it too long, I'll risk chipping into the actual paint, too short and my paint might not have cured completely and will bleed where it's not supposed to. What is a good guideline or good practices regarding this? Keep up the good work and shöne weekend noch :)
@ETOE
4 жыл бұрын
Try it on a test piece.
Hi Martin love this colour scheme but was hoping to do this but in matt , any tips for clear coat (matt )
@ETOE
4 жыл бұрын
Use matt clearcoat instead of gloss clearcoat.
so im using a black 2k primer to make my metalix red look darker , but i need some white accents , all the logos will be shock white , do i spray the primer and then the white mask with stickers , then paint he rest , or do i sand the white and primer first to make it smooth ?
How comes the metallic gold look so greenish?👌👌👌
Looks like greg van avermaet's giant tcr! Is it for him?:D
Wie lange schleifst Du so an einem Carbon Rahmen? Top Video, danke! LG (Kanal ist Abonniert, what else!)
And what is it your recommendation use a mask to paint inside or use a logo like you are using in your example?
@ETOE
4 жыл бұрын
Use a mask to paint as I use in my example.
Do you need to degrease after you sand the paint coats?
What are you cleaning the parts with? Water or alcohol?
Would it be a problem if these colours were reversed? I mean, painting the base colour as gold and the darker colour (black) over top?
Great video! 💥 What black primer do you recommend for carbon?
@ETOE
2 жыл бұрын
This one: amzn.to/3jTOCoE disclaimer: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. You have no extra cost using these links. You help to support the channel and allows me to continue to make videos like this. Thank you for watching!
@harrymaccycling
2 жыл бұрын
@@ETOE legend, thank you 🤝💥 hope you're doing well 👍
Great result. Why don't you use an exhaust system when spraying?
@ETOE
4 жыл бұрын
Too noisy for the mic.
@DanTuber
4 жыл бұрын
@@ETOE If you weren't filming, would you normally use it?
I was picking my nose when you explained "popel" LOL
Bravo 👌👌👌👌
Question: How long before you remove the masking tape / logo when using spray cans? Thanks!
@ETOE
4 жыл бұрын
10 seconds. Five minutes. Sometimes I have lunch in between. Depends on my mood.
what do you recomend custom painting a pinarello rs road bike
on the frame did you use Montana Gold Shock Black OR
I have a Matt black bike with glass lettering. I love the color scheme but I’m getting a little tired of it. The pain is in excellent condition but I’d like to add a little pizzazz to it to liven it up a bit. I was wondering, is there a clear coat DIY spray I could use over this provide a slight color shift or oil slick effect without totally starting from scratch?
@ETOE
Жыл бұрын
Just use this clear coat: amzn.to/3lC3sVt disclaimer: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. You have no extra cost using these links. You help to support the channel and allows me to continue to make videos like this. Thank you for watching!
Hi, I want to make custom transfer stickers. Where can I make that? You have German or Dutch online shops to make that? And what kind of sticker do I need because it should be removable and not take the paint with it.
Right now I really want to paint my bike!!!!!! But how about matt finish????
@ETOE
4 жыл бұрын
Please watch the matt finish video of the Cervelo !!!!
for fades, should you also mask the black part as well?
@ETOE
4 жыл бұрын
I do not mask the black.
what would you use to protect a matt finish?
You're funny. More vids
You have any tips on how to spray light colors ?because I have a pink can and its ligit transparent and looks crappy
@ETOE
2 жыл бұрын
On light base. White means light.
Hab Montana immer zum sprayen benutzt hehe
What type of printer is that for the logos?