"They're super easy to do." Looked like a real pain, lol.

@gs1100ed

2 жыл бұрын

His definition of “super easy” is kind of different than mine!

@benjy6358

2 жыл бұрын

Me reading this comment before get to the window part : Yeah it will be harder than normal car, but cant be that hard. Me after watching the window part : That is utter pain, probably a week job if do it myself, with millions problem afterwards.

@crazyman8472

2 жыл бұрын

Super easy; barely an inconvenience. 😎

@jowensblack48

2 жыл бұрын

That's why he's the ninja...

@jackbauer4607

2 жыл бұрын

it's like an inside joke at this point, I bet some amateur mechanics are cursing at Ninja trying to do the same things in the garage ;)

First gen CLS is truly prettiest CLS

I think car ninja does a great service to his community and fans! Keep up the good work Johnny!

Thanks, Jonny, you make it look so easy, you finish things in a couple hours that would take me all afternoon, or weekend, a dozen trips to the parts store, skinned knuckles, bad words, and have to do it again.

Might be "super easy" for Jonny the Car Ninja, but a lot of experience and manual dexterity required. Nice work ✅

Gotta love how Johnny says "it's Super Easy" then proceeds to do 150 steps 😂. This would take us atleast a whole day, maybe even a nap...then back at it lol Love this guy he's amazing. I took off the door panel on my 2010 BMW 750Li, and it was beyond simple. This looks like a nightmare in comparison lol. It's "Super Easy" should be on a shirt for his merch lol

That was one of the most involved regulators I have ever seen!

Just what I needed to stay in bed just a little longer 😂 Keep the vids coming. Won’t miss a one 👍

I love the w219 platform, cls 55 to be exact! Wouldn’t mind seeing more work done on them! Keep up the work car ninja

@diablocls55

2 жыл бұрын

I love mine

Glad someone loves working on those overpriced piles of junk,good job Johnny,your the man bro

You do Awesome Work, Johnny!!

Love you Johnny! Please buy and save an old school Mercedes from the 90s or 80s.’ I have 6 from 79-99, you’d be my go to guy if I was in Kansas. Keep up good work

Totally fantastic, nothing less expected!!

Wow, that is a lot of work 😲

Jonny is the reason why you need a good mechanic doing work. He makes each component smooth and sit perfectly with its surroundings. Why does a window regulator cost so much? Look at the mess, an artist needs to sort it out!

Lesson of the day: don’t rush and pay attention to details.

Love the Mercedes content ❤

It's just a matter of making it perfect...Love Jonny

Another brilliant video!

"Super easy to do" by ninja literally translate to "just buy a whole set of door from the yard" for me.

Hate pulling plastic trim always waiting for the snap 😢

Great video ... you make it look easy ! The tint on that window was pretty bad :)

@kerrylewis2581

2 жыл бұрын

That tint has to go

Good content, keep it coming!

Ninja I like your work seen you a while back working on hoovies cars , wish to have a guy like you here in uk to figure all the issues of my car , and the Cls window regulator came exactly one week after I done my one 🤣🤣

I have a CLS and I did this job it is a monstrous pain in the arse! He takes it in his stride!!

Get a spring-loaded pullback chisel to cut the heads off of the rivets after using the punch to knock the center out of the rivets. Then there's no need to drill. The kits also come with spring-loaded pullback punches too so no hammering a punch. Both are great, especially if you're in a tight area.

It’s nice seeing how to do repairs

Oh yeah don’t forget to get the rivet pieces you punched out in bottom of door bc they will rattle like crazy. Lol. Great job Johnny you are a MASTER!!

You’re a very smart man Johnny, specialising in cars that last just after warranty, I hope you’re making a killing. Aussie fan.

Good work

The window regulator replacement did not look easy to me. Jonny knows what he doing.

Door work is like keyhole surgery. You'd think manufacturers could include some removable panels where possible.

@gs1100ed

2 жыл бұрын

The window regulators in my 2006 Chevy truck actually are “super easy”. No window removal required, and the door card comes off much much easier.

@philb707

2 жыл бұрын

You think this is bad, you should see a B6 generation Audi A4 regulator replacement

@tylerniday8935

2 жыл бұрын

@@philb707 been there, the whole frame comes out. Its one of the oddest regulators in my time next to Bentley's that use chains.

The kraut car king!

Good job

Amazing!

We need a car ninja in every city!

That window tint....

Dirko grey sealer (made by Elring) is also excellent and is used/sold by VW Audi dealers - at least in the UK.

Ninja and co. If you ever get a chance it would be nice to see a blend door repair on these german cars. I currently have an issue with the IHKA system or possibly a detached/broken heater blend door.

Always enjoy your channel. BMWs suck but someone's gotta fix em

Legendary status

I have a 2009 CLS and a couple of weeks ago the window wouldn't go all the way back up when the door was closed. All I had to do was reprogram the window regulator by holding the window button up. There are several videos that show how to reprogram windows regulators on KZread.

I dread the day I will have to do window regulators on my 2006 CLS55 AMG lol

Thank you for that update on the 645. I have the same one. I truly enjoy that car. The idle pullies and belt tensioner should be service items on all MB's. I have had 3 different MB's with 6, and 8 cylinder motors and have had 3 idler pully failures.

@LynxStarAuto

2 жыл бұрын

Usually your best route to take is replace the all 4 items: grooved pulley, smooth pulley, tensioner, and belt. When speaking of the 272/273 engines.

@diablocls55

2 жыл бұрын

Went thru several idler pulleys and serpentine belts on my 07 E550

@thethomasj1795

2 жыл бұрын

@@LynxStarAuto The Mercedes-Benz is the only brand that has given me so many issues with belts and pulleys.

@Crusher103

Жыл бұрын

Sell it. Sell that 645i. This is coming from a former 545i owner. Don't argue just do it while you still can get decent money for it.

@thethomasj1795

Жыл бұрын

@@Crusher103 It's a 6spd convertible. It will probably always bring decent money

A job that in my hands would have led to blood, sweat, personal injury and mangled car parts, performed effortlessly, flawlessly, with elegance and care.

Love my cls550

I really like the inner door cover - most cars I've ever opened the door on have cheap-ass plastic which shrinks and tears easily. Otherwise, this is the worst door trim removal sequence ever :) . That window tint needs replacing.

Which Milwaukee impact wrench did you use for door panel please. I want that model

Just wondering How may times Jonny has poked holes in door speakers or accidently ripped the wiring from the tweeter ?

How about wind and exterior noise coming from the lower place near the b pillar after removing the window and changing the regulator?

Johnny, what is the exact model of Milwaukee impact you used , the small one?

Would be 2 weeks for me to do. Plus bandaids, Excedrin, and back pain meds.

Car Ninja, do you have to road test at highway speeds for air noise around the window?

Easy job: disassembles whole door, no screw untouched...

I have a 2005 x5 4.4i bmw. it has a peracetic battery drain problem. battery is dead after car sets for 24 hrs. Any specific areas i should look??

Had to do this on my old CLS500 and man it was not fun. The absolute worst though was the rear window regulator on my CLK500 cabrio, had to practically pull the entire rear interior.

Nice jonny was surprised to see only the 3 rivets - Q30 Infiniti ( basically mercedes ) has door module with everything on it - held in by about 8 rivets - they were a right chew on to swap out.

I'm not sure how different the 2005 CLS 500 (featured in video) is from my 2008 CLS 550, but I did not need to lower the window in order to access the bolts, nor did I need to punch out the rivets to remove the brace, but perhaps those steps simply made the job 'easier' (?).

@VideoplayerE

3 ай бұрын

Bei meinem 2005er muss ich das Fenster senken da ich oben kein Loch sehe für die Schraube

Notification squad 💪

You are also a car surgeon!

Nice work! Question: Do you guys work on Smart cars ? Since it's basically a Mercedes...

I wonder what the book time is for that job?

The smaller Milwaukee you used with 10mm bolts

lol that window tint

Hey what tool Y have in arm (video 4:02)

👍👍👍

If you do valve covers on an N62, and they come back leaking again in a short period of time, replace the entire valve cover. It's plastic, they warp, and shrink. These days, I just sell the customer the entire job with two new valve covers. Produces a much higher quality repair.

👍

I did both outer door handles on my 98 Corolla, was a complete headache. Drivers side took almost 2 hours fighting with the stupid clip to the right of the lock. Passenger side took 40min I just said f it and broke the clip because the new handle came with them.

It does look like a pain!

Jonny. I don't know about you but I hate pulling and popping plastic parts. Seems I usually end up breaking something. Any advice for us novices? When something breaks or cracks, do you replace with a new part, try to repair it, or just put it back together? I'm sure you run into cars that come in with broken plastic or broken fasteners. Do you repair them or put it back together being content that it came in that way?

@johnnykaraj6115

2 жыл бұрын

Well, it depends. If is repairable, fixed it. If it breaks beyond repair then you have no choice but to replace it. Just take your time when it comes to trim work.

@stephenwilliams6103

2 жыл бұрын

He works on German cars. They use plastic as it gets britol when getting hot'n'cold. Then when you lift the bonnet (hood), then look at it, it breaks before you eyes🤔😎🤣

I'm new around here, loving the videos! Does he do work in Mercedes as well? I feel like BMWs, Audis and Porsches are the worst Germans, Benzes not so much. Is it true?

This is basically the same kind of regulator they put in Fords and very similar to the ones they put in Hyundais (aside from the use of tubes rather than pulleys). They all turn into rat's nests once the reel starts to wear out. But it looks like a much harder job replacing this one; if MB is going to bury and rivet these things into the doors, shouldn't they at least spring for one that has a good chance of lasting the life of the car?

Wait, no door SRS airbag?

@mercedesguy

2 жыл бұрын

@@formatique_arschloch I had forgotten about those, DUH!

Did you use a new regulator motor?

@gs1100ed

2 жыл бұрын

Maybe they are really expensive? Maybe COVID supply chain causes sourcing issues? Maybe customer does not want working parts to be replaced until they fail?

Window Regular Repair - Engine out job

I guess it was easy for the Ninja........!!!!!!!

Ninja: A polite request. Could you add to the narrative the mileage of the vehicle , and the number of labor hours spent on it, soup to nuts? Thank you.

There’s a few miles left on that belt.

Really nice work, but I think cars that use the roll down before you open the door are waaaaay too complicated.

Super easy? It might be Super easy if you were trained in the German dark arts, but to a mere mortal that is a serious pain in the arse of a job. Have you guys worked on a VW Passat cc? I've got an intermittent front airbag fault, it's in the front driver's seat. I get it cleared then a couple of days the airbag light comes on again. Any suggestions guys. All the best from Scotland.

@stephenwilliams6103

2 жыл бұрын

Check the block connector under the drivers seat. There could be a little bit of corrosion on the pins of the connector. Which would cause a bit of high resistance on the wiring. I had this problem with my e39 a few years ago, all I did was pull the connector apart, sprayed the inside of female part of connector. Then put it back together 😁, no more srs light on dash.Got an audi A5 quotro now. Do 400 miles then it needs a top up of a litre of oil. I think its called 'running oil changes' between filter changes🤔🤣. Hopefully having it repaired under warrenty by Audi 🙏🤞. Otherwise I'm looking at a £4000.00 repair bill 😜

@2rueblue

2 жыл бұрын

@Stephen Williams thanks Stephen that makes sense and I've just realised it stays clear until the seats moved, my girlfriend, is much smaller than me so it could be the cable moving. For your sake, I do hope Audi honours your claim. Thanks again for the tip buddy

I shall never use my windows again!!

They totally changed the design again. My regulators on my 01 e320 are riveted in. No brace. The back is a simple design with four rivets. I didn't even punch them out. They drilled out easy. The front has 9 rivets, and I should have punched them out first because I ruined a couple of Harbor Freight bits and slightly oblonged the holes. Now, I have to do one of the back ones again, and I got a punch this time. You cannot use that hand riveter on genuine mercedes' rivets! They are too hard. They do not design cars for easy repair but ease of assembly at the factory. I think that is why they went to rivets instead of bolts for a lot of stuff.

This type of job was way easier on my Buick lol

SUPER EASY:? LOL

I’d charge $2,000 for that

I just had an episode of PTSD. I had an N62 powered 545i. It was great for all of 2 years then the problems started. What a piece of shit motor.

Many many reasons not to buy a crappy mecedes benz changing the window regulator it would be easier to pull the engine out of my toyota hilux power windows l don't have no problem winding the windows up and down infact the toyota hilux workmate still has manual windows only two of them but the latest model also serpentine belts another not so great my hilux dose not have one and power steering l pulled mine out and l drive it around without power steering it's good no problem

Jonny, I thought you would have more integrity than to leave that dogsh!t window tint on there. It would have looked better with just the tint on the driver’s door gone! LOL

Who in their right mind would own a 15 year old MB? The poor bastard must be hemorrhaging money trying to keep that thing on the road.

TELL YOU WHAT IN MY EXPERIENCE THIS IS THE BEST 2 HOURS LABOUR YOU WILL EVER PAY ANYONE TO DO FOR YOU THESE WINDOW MECHANISMS ARE SO AWKWARD, EXPENSIVE AND THE DOOR FRAMES WILL CUT YOUR HANDS TO PIECES ESPECIALLY IF YOU ARE WORKING WITHOUT POWER TOOLS AND EXTENSIONS LIKE ME. NEVER AGAIN!

Why not clean the whole window?

Remove that horrible window tint while your at it lol. That stuff looks awful

I'm gonna buy a $80,000.00 car and refuse to spend more than $200 bucks on the tint. That's how I know this poor car is on its third owner.

Jesus so over engineered for just a window. I expect my bmw coupe will be the same as it drops the same way.