That’s awesome! Thanks for your great work 🤩 I‘m still building up my equipment at the moment, but will definitely purchase this when the time has come 🙏🙏🙏

@davidjoshuaford

2 жыл бұрын

Let me know if you have any questions when you get your gear!

Would love to see you review and compare the N300 and N500 to the new N100 just released. Since you are one of the few creators on KZread using Canon PTZs would really like to see a deep dive. (Canon should totally lend you the models you don't have including the new controller)

Hey thank you for all informative videos, there is a shortage of companion tutorials video showing how to pass strings and variables. Could you do a video or two please showing us how to configure button without using preset . I am trying to turn lights using IFTTT and it gave me hard time to use shell. The one to connect lightkey to the companion and streamdeck will be highly appreciation.

Great work!

@davidjoshuaford

2 жыл бұрын

Thanks Michael!

Hey great video! Can you record Iso on the CR-N300 USB-C port? or how would you do it? Thanks! 👍

Swithching from testint with Companion on my laptop to the computer we are going to use for production, I get all the functionality on the Streamdeck and profile except for going between the 10 presets, nothing happens, though I can still record the positions by long-pressing, just not switch to them afterwards, PTZ-controls and other stuff still works. Same version of Companion, Same network, same everything :)

@RasmusPetterssonVik

Жыл бұрын

Figured it out, hadn't enabled OSC in companion settings :)

@davidjoshuaford

Жыл бұрын

Yep, was going to say it sounded like OSC wasn’t switched on 👍

Hi David! Can you tell me which teleprompter mount/glass/screen/anything else I'm forgetting/etc you are using in 0:39 of this video? Teleprompter + Ptz Camera is usually a weird fit or SUUUUUPER expensive, from my looking around.

Great jobb! Are you planning to make a similar solution to work with the Sony ptz like the fr7 ? Or cámara and zoom control to the Sony FX series?

@davidjoshuaford

9 ай бұрын

Not at this stage, the profile is specifically built on Canon’s XC protocol, so would require a rewrite to port to other brands.

Hey David! Awesome videos and thanks for this video. This video in particular is what inspired me to get a Canon CRN300 + StreamDeck and has been fantastic! I was playing with the CRN300 recently alone and control using the IP address from Safari. The next day, when I brought it into a studio to attach it with my stream deck,, it says it’s connected on BitCompanion, but it won’t do anything that is pressed on the SD. Is there any advice or suggestions you have on functions for checking if maybe the CRN300s in not letting the SD so it’s things? Would really mean a lot to get your advice and help. Thanks a ton!

@davidjoshuaford

Жыл бұрын

Hi Marlon! Glad you’ve been enjoying it! I love my Canon PTZs! If you moved the cameras to a new network in your studio, chances are you’ll need to update the Target IP address in the Companion PTZ module to match that of the cameras.

@marlondesilva8863

Жыл бұрын

​@@davidjoshuaford ! Thanks so much for this. I greatly appreciate this and your response. To understand so there is a difference between an IP Address and the Target IP Address? I did try changing the IP Address of the camera that I normally use, however it still oddly did not budge. Any suggestions or tips? Thank you again kind sir.

Hi David.. Is the PTZ programing for the stream deck universal or is it talyored for each of the manufacturers? In other words. Can you write automation for diffrent (PTZ Cam) manufacturers? I am very interested in you work. Keep up the good work! GSS

@davidjoshuaford

Жыл бұрын

Hi Greg, at the moment this PTZ profile only supports Canon cameras with the XC protocol. I am thinking about building a general VISCA profile for the majority of other camera brands, but I need to get my hands on one to program, and also some of the features aren’t comprehensive to a single companion PTZ module, which makes management and deployment more tricky.

Excellent application! I use CR-N300 cameras to feed an OBS live stream. Any thoughts of doing a profile for the Loupedeck Live, especially one that takes full use of its rotary dials?

@davidjoshuaford

Жыл бұрын

I haven’t tested a Loupedeck Live, but from others I’ve spoken with, it sounds like the touch screen doesn’t handle long-presses, but just records multiple single presses. If I get some time I’ll test it out!

@brianfischer788

Жыл бұрын

Thanks@@davidjoshuaford ! I also have the mid-sized Stream Deck as well as the Loupedeck. Looking at what you did with the XL, I might just upgrade to the XL. When I first looked at the Loupedeck, my thought was to use the rotary dials down the right side for pan, tilt, and zoom, with one dial covering each axis. However, I suspect that the rotary dials consist basically of 360 individual short presses. I really like your inclusion of aperture and color balancing parameters in your build.

I used your software for a corporate event this week and it worked great! One question… I noticed the Tally lights on the Cannon cameras didn’t work. Is there a setting I’m missing? Should this be working with gang mode?

@davidjoshuaford

11 ай бұрын

Glad to hear it worked well for your event! When companion upgraded from v2 to v3, the tally options built into the module went away. You will need to set up Tally rules using the new Triggers tab instead.

Hi David, have you played with the auto tracking upgrade for the CR-N500 yet? I’m not seeing much out there from creators besides Canons official videos. I’d love to hear your take on it. I’m thinking of upgrading one of my cameras.

@davidjoshuaford

Жыл бұрын

Hi @jt1021, I don't have my hands on the firrmware update just yet, but do plan to when I can get it and will let you know after playing with it.

Any Memorial Day promotion coupons 2023?

Thanks a lot. Do you confirm that this system will only work with canon PTZ ? I Hesitate to buy Birddog model and one important factor for birddog is the free autotracking software. There is no solution like that with canon ?

@davidjoshuaford

Жыл бұрын

Correct, this particular profile only works with Canon PTZ, because it uses Canon’s XC protocol. Canon has face tracking focus, but not pan tilt zoom tracking. I have spoken with Canon reps and they’re thinking about that, but could be a challenge of whether to implement the processing on the camera level or external computer. If you buy birddog, there are other Companion VISCA modules that will control it. I went with Canon because all my other gear is Canon and wanted the images to be complimentary.

Any chance these would work with the BMD 2ME ATEM? Would be nice...

@davidjoshuaford

2 жыл бұрын

They should work, up to the point of hardware limitations, as all ATEMS are similar software - ie it’s written for 1ME, 8 inputs etc, as per the Extreme ISO’s capability, so would control the first ME

Great plan and execution. Any chance for BirdDog cameras?

@davidjoshuaford

2 жыл бұрын

Thanks Bill! I might look at a VISCA version at some stage, though it would require a ground-up rewrite. Will consider it.

@poucedeleon

5 ай бұрын

Does Canon use a different protocol than other cameras, such as the Panasonic? I love the feature of being able to select between multiple cameras.@@davidjoshuaford

@davidjoshuaford

5 ай бұрын

@@poucedeleon you can use VISCA with Canon, but I’m using the XC protocol here

How do you get the tally like to work? Using to set up.

@davidjoshuaford

Жыл бұрын

You can assign tally in the module settings tab in Companion

so i just ordered an Aida PTZ camera, and the controller is on back order, can i build a similar profile for that camera? will be switching using and ATEM HD (newer version is called the ATEM m/e 1)

@davidjoshuaford

2 жыл бұрын

You can probably build using VISCA modules within companion. I was using that initially for the Canon cameras, but found I had to use a few different modules to get all the functionality.

@jadefinchscene5644

2 жыл бұрын

@@davidjoshuaford cool, i will see what i can do. hoping i can avoid ordering an different brand of controller.

Hey, David! Before I buy your wonderful Canon PTZ controller on the Stream Deck XL, I have to ask - can I use my other Stream Deck set up for animated super source in ATEM at the same time? Stream Decks connect to the same computer and probably use the same Companion software.

@davidjoshuaford

Жыл бұрын

Hi Martin! The PTZ profiles uses pages 86-94 in Companion, so you can use any of the other 1-99 pages outside of that for other purposes. I also have a profile that combines the PTZ profile + ATEM Extreme + ATEM Pro if that's of interest. What software are you using to "animate" the supersource? Companion can alter SS layout via an instant cut, but not animated over time. You can have multiple stream decks connected to companion at the same time.

@martinmae6825

Жыл бұрын

​@@davidjoshuaford thanks for replying! I use Super Source animations by Brian McGuigan of A2Z Productions. I really love it and I hope it and your product can work together. My idea is to use the animations in the 5x5 Stream Deck and yours in the Stream Deck XL.

@davidjoshuaford

Жыл бұрын

@@martinmae6825 Ah Brian! Yes that will work, as long as they are installed on different pages of companion you can run it all on the 1 companion installation with multiple stream decks.

@martinmae6825

Жыл бұрын

@@davidjoshuaford tomortow I will try it out! And when I need help, I turn back to you. Btw, I sent an email too, did you see it?

@martinmae6825

Жыл бұрын

David, can you please check your email!

Is it possible to use the PTZ N300 via ethernet only? Or do you have to use the HDMI / SDI Out?

@davidjoshuaford

6 ай бұрын

Yes, you can use Ethernet only if you have a POE+ switch for power and control, and can run video over NDI. A little bit of latency and compression vs SDI, but works well, especially if you’re placing cameras in tough places!

I just use an xbox controller with vmix 😁 also 3x5 streamdeck

Hi. Does it work cr n700 cameras as well? Thanks

@davidjoshuaford

Жыл бұрын

Yes - they are the same protocol

Can I use any other PTZ brand?

@davidjoshuaford

Жыл бұрын

Not at this stage - the profile is built using Canon’s XC protocol, so it only works with the Canon PTZ cameras.

Hello, at 0:22 of the video, what is the reference of the attachment system you used to attach the camera to the bar please?

@davidjoshuaford

8 ай бұрын

It's a Superclamp, attached to a "Manfrotto 208HEX Head Mounting Plate with Hex Stud - 3/8" Thread", attached to a "Manfrotto XPRO Magnesium Ball Head with MSQ6PL Quick Release Plate" for leveling. Also recommend using a safety wire!

@Archimoon

8 ай бұрын

Thx !@@davidjoshuaford

will this work with ptzoptics cameras?

@davidjoshuaford

3 ай бұрын

This uses the Canon XC protocol, so it's only compatible with the Canon PTZ lineup

What instances are you using to connect the PTZs?

@davidjoshuaford

Жыл бұрын

Canon PTZ

@AlexSanchez-bq9ej

Жыл бұрын

@@davidjoshuaford got it. I was in the wrong version. Thanks!

can it control c300MK3?

@davidjoshuaford

Жыл бұрын

I haven’t tested it with a C300mk3, but it might, given it’s based on the same Canon XC protocol

PTZ cameras are fine for certain settings. But nothing, not even a robotic camera, can take away a persons attentiveness or awareness while being on camera. And if you have no operators then you would be watching all the cameras and setting up your own shots instead of the operator doing it for you. There is also the fact that PTZ's are limited in their versatility. Forget having only PTZ cameras. I'm sticking with having operators on my cameras.

@davidjoshuaford

Жыл бұрын

Different tools for different jobs and budgets, I'd say. I couldn't run this YT channel on a weekly basis without the PTZs, but then for big corporate clients it's either dedicated camera operators on C300s or a hybrid mix.

@TheHanson

Жыл бұрын

@@davidjoshuaford I agree, different circumstances call for different equipment. I'm not saying that PTZ cameras shouldn't be used. But not for a broadcast that would call for quick decision making and attentiveness. For a KZread channel, sure.

(GOOGLE trans KOR-> ENG) Hello subscribers. I purchased the Canon N-300 after watching the video above. It felt good to use, moved and installed, and it was very good. I have a few important experiences to share. 1. When installed next to the audio woofer, it did not work well. I don't know exactly why. (around 30 cm) large speaker woofer Solution: It operated normally after moving about 1M. (Is the cable not connected properly or is there another cause?) 2. The N300 has an RS-422 port directly attached to the rear, so I connected it without thinking and the device burned. (The N500 had a rear RS-422 shield and was far from the LAN porter.) When I connected the camera, I didn't connect it by looking at the porter, but I did it like a LAN porter. It's broken and it's not true POE was a huge electrical power with 50V electricity (normal equipment is 12V-24V level). Result: Hit AS because it didn't work. What the AS says Connecting for a short time (RS-422) is not a problem, but more than 5 minutes? If it does, it's broken and the motherboard needs to be replaced. AS Amount: Approximately $1,400 in US money came out. ㅠㅠ I understood the basic knowledge of POE while watching this equipment. I am very disappointed with this equipment to Canon. Surely someone else could make this mistake. If RS-422 is designed far away (N500 is far away and blocked by gender) or if rs-422 is blocked, this failure does not occur. Please be careful when using POE. (KOR) 안녕하세요 구독자 입니다. 위 영상을 보고 CANON N-300을 구매하였습니다. 사용감이 좋고 이동하고 설치하고 아주 좋았습니다. 몇가지 중요한 경험이 있어서 공유합니다. 1. 오디오 우퍼 옆에 설치시 작동이 잘 안 되었습니다. 이유는 정확히 모르겠습니다. (30cm 전후) 대형 스피커 우퍼 해결: 1M정도 이동해서 운용하니 정상적으로 작동하였습니다. (케이블 접속이 제대로 안된건지 또는 다른 원인이 있는지는?) 2. N300은 후면에 RS-422 포터가 바로 붙어 있어서 아무 생각없이 연결했다가 장비가 타버렸습니다. (N500은 후면 RS-422 가림막을 설치되어 있고 LAN 포터랑 거리가 멀리 있었습니다.) 카메라 연결할때 포터를 보고 연결한것이 아니라 LAN 포터 연결하듯이 했습니다. 고장나고 안 사실이지만 POE는 전기가 50V로 엄청남 전기 파워였습니다 .(통상적인 장비들은 12V-24V 수준) 결과: 작동이 안되서 AS를 맞겼습니다. AS에서 하는말 잠깐 연결하는것은 (RS-422)은 문제되지 않는데 5분이상? 하면 고장나서 메인보드를 교체해야한다고 합니다. AS금액: 미국돈 대략 1,400$가 나왔습니다. ㅠㅠ 저는 이 장비를 보면서 POE의 기본 지식을 이해했으며 CANON에 이 장비에 대한 실망이 큽니다. 분명 이런 실수는 다른 사람도 할수 있을건데 RS-422을 좀 멀리 떨어져 디자인했거나 (N500은 떨어져 있고 젠더로 막아놓음) rs-422을 막아놨으면 이런 고장은 생기지 않는데요 여러분은 POE 사용할때는 주의하시기 바랍니다.

@davidjoshuaford

Жыл бұрын

Hey, thanks for your comment and sorry to hear about your experience. An easy mistake to make given both ethernet shaped ports are side by side. A good PSA reminder and I will be sure to gaff over the RS-422 port to prevent this.

@user-kr6hu2bi9x

Жыл бұрын

@@davidjoshuaford Thank you for quick response. There are also various audio mixes such as LAN & Snake / s-link, so you need to be careful. (when using POE)