Was able to replace my ink absorber pads by following this video. Thank you :)

Simply and superbly done, thank you

This exactly corresponded to my printer. So helpful. Thanks!

Thank you! You saved my printer!

THANK YOU! This works! I just changed the ink absorber kit of my G2000 and saved money (shop quoted RM80, bought the kit from Shoppee for RM20 and changed it in 5mins)

@idealprinter3113

4 жыл бұрын

Great !

@BetterBevs

3 жыл бұрын

What shop you chose in shopee to buy the absorber kit for g2000

@azrulshahimy

3 жыл бұрын

@@BetterBevs ampersandsolution was the name of the shop

Very nice. Thank you. I'll probably be needing to change my printer's diaper in the near future.

Done subscribe. Informative. I'll try it out cause my G2000 printer had the same issue now. Thank you so much for the knowledge

Very helpful sir. Tq so much

informative vid!

terima kasih. Menjadi. Printer berfungsi semula.

Thanks

Thanks for support 🎉

Perfect

Hi, do u have a vid on replacing ink absorber for ts307?

Hello! I unplogued accidentally the rubber tube going to the waste tank that you are pointing to at 2:45 ish in the video, could you tell me how to replug it? Thanks

So this is how you change diapers of a printer.

Thanks for the video. It looks easy. But, how do I clear the error code and reset the ink counter? Do you have a video for that?

Hi. I have a Pixma G3200. Will this absorber kit procedure work on my printer?

how to dismantle Cannon TS8150 for exchanging absorption pads ?

Hi! Where did you bought the ink absorber pads? Thanks

Would this stop my paper from feeding?

Where can you buy that replacement pads?

why you didn't wipe with paper towel the tray before putting in the new pads ?

Do we need to open the printer as well to clean it fully??

Hello, I'm searching for a reset method for a G7050. Currently I can't access service mode. Any idea?

Hi sir....do we need thw service tool reset?

What about software? Dies de printer automaticly detect with some sensor the full ink absorbers or must some reset in the software be done?

@SameerJee-yv4id

24 күн бұрын

There is a sensor

Where I can find the colour ink wastage tube in canon pixma g3000

Is it the same code for canon pixma g2010?

Very nice Video Sir. I assume this will work for a Canon G3200 (as that is part of the G3000 series) correct?

@idealprinter3113

3 жыл бұрын

YES

Sir will this work on canon e470 ???

How many times, can I do this before needing to do a complete change

where can i buy the ink absorber kit?

Where did you bought the ink absorber pads?

@davidrboland

3 жыл бұрын

Loads selling cheap on Ali Express. I got mine from there. A few quid for a set if I recall correctly.

Will you please tell when to replace absorber sheet

@idealprinter3113

4 жыл бұрын

You can search online or local canon store/IT services shop in your own country by this part number (QY5-0558-000)

Shd the shape of the new ink absorber be same as the old onee??? And is the ink absorbers specific to printer model??

@idealprinter3113

4 жыл бұрын

yes, thay are same shape, we use canon original part.

@kennethchan1986

4 жыл бұрын

I bought the parts. There are 6 pcs. But you mentioned only to use 3 pcs. May I know what are the other 3 for?

@johne6081

3 жыл бұрын

@@kennethchan1986 There are 3 more pads on the bottom of the unit. These require additional disassembly to reach.

Where should the plastic ink overflow tube go? On the top of the pad?

@johne6081

Жыл бұрын

A better fix is to drill a hole in the back of the printer and route the overflow tubes out the back into an overflow tank (small plastic bottle) you provide. Keeps the inside of the printer a lot cleaner.

@Prem_infogate

Жыл бұрын

Thanks John for your advice. I would like to know where I can find color ink tube in canon pixma g3000 to out for potty. I found black ink tube simply on back of the printer. Please advise

Hola dónde se puede comprar estas almohadillas para hacer el reemplazo de las que ya están usadas?

I have g2000 series, is it same size for ink pad absorber in g1000 series?

@idealprinter3113

3 жыл бұрын

yes

can this work in Canon G3010

Hey, found someone selling the replacement sponges ebay. You can clean them once or maybe more if really careful.. And thanks for the video... did mine a while ago on a G1200

Hi sir, Which one we need to do first? the replacement or reset?

@idealprinter3113

4 жыл бұрын

No rule , depant on your steps.

@aleveen lim ko,ini habis di ganti absorber ny harus di reset atau di reset dulu baru ganti absorbernya?

@idealprinter3113

2 жыл бұрын

tak ape boleh sja, reset dulu atau ganti absorber.

What about the other ink absorber?

Pde kaya cloth n lng ilagay dyan as ink absorber? Tnx

Hi admin.... If i not follow steps u wrote below.... Just change the waste absorber

Sir so we should only replace few ink pads not every ink pad is it OK sir

@johne6081

3 жыл бұрын

Someone else on the Internet claimed that you'll get ink spilling out of your printer if you don't change the other pads. There are 8 total -- the 3 replaced here, plus 3 more on the bottom, plus a spill pad under each ink tank. The kit comes with 6 pads -- everything except the spillers under the tanks.

sir canon g2010 showing p02 error what to do

Good day sir! where can we buy Ink absorber kit for G4000 series? Thank you!

@ruansantos6501

2 жыл бұрын

AliExpress

Do we need to enter the service mood first ?

@idealprinter3113

2 жыл бұрын

No , You can replace it before or after absorber reset.

Respected sir pleas tell me from where to by ink absorber kit

@idealprinter3113

4 жыл бұрын

Hi Sweta ,You can search online or local canon store/IT services shop in your own country by this part number (QY5-0558-000)

@johne6081

3 жыл бұрын

@@idealprinter3113 Can't find it anywhere. Dead links. Thank you for the part number. Any verified suppliers?

Great video, except the the replacement pads are unobtainable.

@davidrboland

3 жыл бұрын

Aliexpress is your friend.

@johne6081

3 жыл бұрын

@@davidrboland Thank you. After posting, I did eventually find pads from a supplier in China. Why the hell they are not readily available and easy to find I can attribute only to corporate greed and planned obsolescence, which is why the planet is increasingly polluted with plastic and e-waste.

@davidrboland

3 жыл бұрын

@@johne6081 That's not the half of it. Consider the fact that the absurd cost of printer consumables & spare parts leads to truly phenomenal levels of repairable printers going to landfill. You'll find shedloads of MG cartridge fed printers being thrown out with printhead burnout (partly due to the fact that Canon make no attempt to warn users of some simple steps to reduce the risk of this, like enabling quiet mode, never running inks down past warning symbols and being wary of compatible inks with potentially lower cooling efficiency). Genuine new print heads can be double the cost of the printer itself and the scandalous cost of genuine inks means that even if consumers are aware of the risks of compatibles it is vastly more cost effective to accept the likelihood the printer lifespan will be reduced, as its often cheaperto chuck it out and get a new one than repeatedly buy genuine inks. Given the current attention paid to waste and climate change by governments and pressure groups, I'm astonished printer manufacturers haven't had their collars felt.

Canon 2010 printer showing p10 problem and half print but stop

May I know why only half of the absorber kit is used and not all?

@idealprinter3113

4 жыл бұрын

Good question. Full ink absorber kit ony use in manufacturers assembly. For next maintenance waste ink full counter for G2000 is between 65% . So just need replacing half absorber kit .

@syafiqrodzi9864

4 жыл бұрын

HI Sir. The additional absorber all is in different shape. How do we replace it partially?

@johne6081

3 жыл бұрын

@@syafiqrodzi9864 Additional disassembly is required. I am going to see if I can reach the other pads by pulling the side and front panels (both are pretty easy to do).

The same way on G6000series?

@idealprinter3113

4 жыл бұрын

Almost same , you need to reset waste ink counter before changing absorber kit.

Pwede bang linisin nalang yung absorber?

Sir g570 ink absorbtion price sir..

Don’t you have to reset the ink sponge count in the printer?

@idealprinter3113

11 ай бұрын

yes, must reset the ink absorber counter

@SimonStewart75

8 ай бұрын

@@idealprinter3113 might you be able to share how to do this?

Where to buy the absorber kit?

@davidrboland

3 жыл бұрын

Ali Express. Costs a few quid for a set.

yan po ba yung error code 5B00

Fom ki cost kya hoti h sir

HI,, WHERE TO FIND NEW INK ABSORBER PIECES

@idealprinter3113

Жыл бұрын

i have put the link in my description

After replacing foam then what? still have error with printer

@idealprinter3113

4 жыл бұрын

To put Canon G2000 printer in service mode and reaet absorber counter. Step 1: Turn off Canon G2000 printer Step 2: Press and hold Canon G2000 printer’s RESET button Step 3: Press and hold printer’s POWER button. Step 4: Released Canon G2000 printer’s RESET button, POWER still pressed Step 5: Press and released Canon G2000 printer’s RESET button 5 times Step 6: Released Canon G2000 printer’s POWER button Wait till green light become stable. Now, Canon G2000 printer on SERVICE MODE condition. Step 7 : To enter reset key. press reset button 5 time then press power button 1 time to enter. Turn your printer off , then restart . Cheers !!! Good luck!!!

@tonynes3577

4 жыл бұрын

The reset button is the red triangle button, I assume. I didn't change the absorber but I tried resetting it. It didn't work. Yeah Good Luck.

@darkestmon

2 жыл бұрын

@@idealprinter3113 hi, after step 7, no steady green, just 7 orange blinks. does it mean I need to replace the internal absorbers too?

Will this get rid of the 5b00 error message??

@idealprinter3113

4 жыл бұрын

Hi Tony , Your must reset your printer

where to by ink absorber kit

@idealprinter3113

4 жыл бұрын

Hi Shenal ,You can search online or local canon store/IT services shop in your own country by this part number (QY5-0558-000)

@kurama5073

3 жыл бұрын

That’s very detailed thank you 👍

@johne6081

3 жыл бұрын

@@idealprinter3113 Lots of luck reaching them by phone. (No email link provided.)

I have MG5350

Guy's walang reply sakin kung pwede ba ang cloth as pamalit na ink absorber kaya sinubukan ko sa trabaho ko, sa printer sa Office so far so good naman po.. Wala issue sya kaya pde pala ang cloth.. Printer head cloth ng Tarpaulin Printer ang eksaktong inilagay ko sa Canon G4000 ilang weeks na la nmn issue sa Canon G4000.. Tnx

@absarne9237

Жыл бұрын

Cloth rin ang plan kong gawin pamalit sa ink absorber sa Epson L3150 sa Office sa work ko.. Pag nag reset ulit ako ng printer nato.

Link pembeliannya pak

@idealprinter3113

Жыл бұрын

link inside description

if they can make tank for ink, why can't they make another tank for waste ink ?? why use stupid pads ?? these companies are evil,

How to Reset Canon Pixma G2000 Series error Ink Absorber Full [5B00] STEP 1 - Enter Service Mode Service mode operation procedures: 1) Turn off a printer 2) Press and hold the STOP button 3) Press and hold the ON button (do not release both buttons) 4) Release the STOP button (do not release the ON button) 5) While holding the ON button, press the STOP button 5 times **, and then release both the ON and STOP buttons together. Wait till green light become stable. Now, Canon G2000 printer on SERVICE MODE condition. STEP 2 - Reset error Ink Absorber Full [5B00] 6) Press reset button 5 time 7) Press power button 1 time to enter ( Printer now printing D=00 page) 8)Turn off the printer (wait 10 seconds) 9)Turn on printer and printer ready to use MAINTENANCE PART Ink Absorber Kit www.aliexpress.com/item/32847964259.html?aff_fcid=fa8d2d47251341f686da6e5f924af995-1690351054273-00302-_DFjmQRd&tt=CPS_NORMAL&aff_fsk=_DFjmQRd&aff_platform=portals-tool&sk=_DFjmQRd&aff_trace_key=fa8d2d47251341f686da6e5f924af995-1690351054273-00302-_DFjmQRd&terminal_id=e249505e79744a6fa7ce97076782337a&afSmartRedirect=y Good Luck.

@ggavidiagal

4 жыл бұрын

Does this apply to canon G1100?

@idealprinter3113

4 жыл бұрын

@@ggavidiagal yes same way

@bubudacat

3 жыл бұрын

hi Sir.. why my printer cant enter Service Mode?

@ma.cheskafernandez6654

3 жыл бұрын

Hi sir. Does this apply to Canon g1000?

@idealprinter3113

3 жыл бұрын

@@ma.cheskafernandez6654 yes