Boy, you made a TERRIFIC job with these C70 detailed settings info!!! Thank you soooooo much!!!

I seriously cannot believe that you took so much time to make this video. Instant sub. This has saved so much time thank you!!

This is a much-needed all-in-one-place video series on the C70. I wished this would have been around when I purchased my C70 6 months ago. Thank you!

Great deep dive into the Canon C70. I took a supposed masterclass on this cinema camera last summer but it left me with so many unanswered questions. I spent the next six months simply setting up test scenes to learn how to best use the camera. Not a bad way to go, mind you, but very time consuming. Then, I stumbled upon your two part tutorial for the C70. Filled in nearly all the blanks I still had, including the ideal ISO setting to use. All I ever read was 800, but as you explained it depends on the profile you're shooting in. So, many thanks, Ian!!!

Excellent video, well done and thank you.

WOW. Outstanding video, well done. thanks for sharing!

So informative, thank you!

Thanks for taking the time to put this together. It covers everything needed to fill in any blanks a person might have in their understanding of the C70.

Great overview. I've had the C70 for two years and I learned a lot from this Tech Guide. Thanks Ian. Great job.

Just bought this camera! Excited to create with it!

I have watched so many videos for learning my r5c that have helped me but, oddly, this one is the best as most functions carry over. Thank you so much. Subbed.

Amazing video with tons of useful information for beginners. I’ll have to watch this a few times to soak it all in, and then watch the second video. I just got my C70 this week. Thanks again.

I know this video took FOREVER to make! Always dope to see people using the same camera you're using! LOVE MY C70! 🤩 A little bias.

Nice Video Bro. Nice jump roping too!

So nice that this is free

Lot of terrific information for a brand new C70 owner - thanks. I still prefer shutter speed over shutter angle because it's easier for me to understand being a still photographer turned cinematographer. I came from a C100 M2 so right now I'm shooting WideDR, but I want to use Clog2 more - the Clog1 in the C100 was really a pain to grade and I lost interest in it. Now shooting 422 10bit it's a whole new world!

Amazing video!! Do one for Canon R5C

amazing- thank you

woww. thanks, so perfect.

before i was checking skintones also with zebra and WFM. but now i think, fals colour only is enough, to create the szene. thank you for that very clever manuel.

Thank you for this guide. Quick question re manual focus guide: does it work with vintage lenses?

You need to send the camera in for repair to fix that hinge. I've been fighting Canon and plan on filing a class action to make them redesign it., I've already threatened Discovery. You should definitely get that hinge looked at though.

Great video. I want the C70 mii to have a 6k sensor, a boxier design, full size XLR ports and it would be perfect to me.

@ianthurstan

Жыл бұрын

Mini XLR’s don’t particularly bother me, the mini versions seem to work fine on all the C70’s and Blackmagic cameras I’ve used, and the sound I’ve gotten from the C70 with a Sen 416 mic has been really good ☺️ Personally I’d like to see open gate recording in either in 4K or 6K, and I’d prefer a redesigned hinge for the lcd screen. The screen is excellent in terms of clarity and adjustability, but the hinge just feels a little loose and flimsy. I’d prefer the mounting option to be more like the C300iii

@torsrive8920

7 ай бұрын

RED KOMODO....

Great Video! When you talk about exposure and false color, what do you mean with white point?

@ianthurstan

6 ай бұрын

The white point refers to where a white piece of card should be exposed at. White is normally one of the brightest parts of an image. Objects brighter than white are normally some kind of speculative highlight such as a window reflections/the sun/reflections off metallic objects. If your white point is correctly exposed it means you have less chance of blowing out highlights ☺️

hi thanks for the great video. I was wondering if you could help me with this. I recorded footage the other day on mp4 file format but had previously recorded XAVC format. When I try to view the clips on my pc from the SD card only the XAVC clips show but when I go to media on the camera all clips show including both formats. How do I get access to the mp4 files on the SD card (i.e. (copy them to my pc) to work on. Thanks

Hi Ian, how do you set the slow shutter below 1/15 sec? I choose "slow" in "shutter mode" but I can't go below 1/15. I can only increase to 1/30.

The greatest video tutorial I´ve ever seen, better than payd tutorials. After having watched that I figured out how many things I was doing wrong. Thank you so much, Ian! Just one question that bothers me since I have the C70. Mostly use BT.709 WDR profile. My images for some reason tend to be magentish. What can I do to solve the problem? Thanks and good luck in you so sifeul and well done work!

@ianthurstan

5 ай бұрын

You may need to go into your kelvin temperature settings and adjust the Green/Magenta tint; you may have accidentally adjusted it and not realised, or you could use a grey card and perform a manual white balance. this should you give you an accurate kelvin range :) hope this helps

@jumberbolkvadze78

5 ай бұрын

Thanks@@ianthurstan

Hi great video can you tell me what handle & nato rail do you have fitted to the C70 ?

@ianthurstan

8 ай бұрын

Hiya, it’s just a simple small rig handle and small rig cheese plate with an additional base plate,(came as one package) no NATO rail on it, just a 3/8ths screw with 2 locking pins at the side of the main screw, it’s small rig number 3190 and is about £130. There are bigger and more fully kitted out options now but we got these when the first C70 was first released. As it’s low profile and designed for portability, I ’d prob upgrade to a nato rail system at this point as there are lots of options now ☺️

Question: The Focus Guide 2nd Frame is greyed out on my Canon C70. Does anyone know why that is?

Great stuff. If I shoot in the new Canon 709 codec, and I do, is that base 400 like WDR codec? Or 800 base? Thanks? I just subbed. This is so complete and amazing info bud.

@ianthurstan

11 ай бұрын

I would assume it’s either 400 or 160, as I think a standard 709 is 160, but with the new Canon 709 having a similar dynamic range as WideDR it could be 400, id have to look into it to be 100% sure ☺️

@scottievee7467

11 ай бұрын

@@ianthurstan Odd. I've watched many videos that were all things C70 and didn't even know to change the base ISO. I was under the impression it was 800/3200. There have been times 400 ISO would have been easier to shoot with outside. Thanks!

I wish I could limit file size somehow without recording stopping like gopros do. Why? Because dropbox limits to 50GB files for uploading through website and also to reduce corruption risk of losing all of a bigger file. Such as by static, SEU, etc. Does anyone know if limiting file size is possible other than cutting often.

what is the difference in 90 or 270 with osd orientation lcd? when do you choose to use 90 ? when do you choose to use the 270? thanks

@ianthurstan

6 ай бұрын

I think it’s referring to which way you turn the camera on its side, i.e is the grip handle facing up to the sky or facing down to the floor. 90 and 270 both turn the lcd information vertical just in the opposite direction

grg bro

Head start for 3rd year lol

🌟🌟🌟🌟🌟

If c70 had open gate and 6k it would be a desirable camera. By the way there is no such thing like correct motion blur. Me personally cant stand the smeary image the shutter rule gives.

IRE values are a thing of the past. The Ed Lachlan zone system is a more accurate system of exposure derived from the analog world and more adapted to the digital world. Also, the C70 sensor is one of the rare sensors that lets you expose for the shadows ( old school way ;-) Leave ETTR to the Sony fan club guys 🫢

@ianthurstan

Жыл бұрын

I personally prefer false colour over most things (simple because individual IRE values are a pain to remember lol), or Gio scopes on a RED camera , and yeah modern sensors don’t need lots of overexposure in log profiles, even the newer Sony ones like the fx6 and 9 don’t really need it, but I still know lots of people that prefer to add an extra half stop/stop, and a lot of people who still shoot on the last gen sensors and then feel comfortable with that method and carry it over to newer sensors ☺️ I agree that it was critical for older Sony cameras to ETTR lol, I mainly mentioned it in the video because I think it’s important to gain an understanding of why stuff like IRE levels were once valuable in the leaning process ☺️, when I first started out it helped my understand log profiles much more easily ☺️ I personally also still love using external light meters and spot metering, which is how I shoot with my medium format photography cameras (I think that’s why I find false colour so useful), since it’s essentially just a newer variation on the analogue spot meters, but provides the individual readings all at once across the different colours ☺️ I’ve not used the Ed Lachman system so I’ll look into it, thanks for the recommendation 👍

@jmbaillard7015

Жыл бұрын

m.kzread.info/dash/bejne/oaR8ysqTnaSah9I.html

@mmolokichrystie9760

11 ай бұрын

I looked into the Ed Lachlan zone thing, but couldn't really see any advantage to it unless you were already used to working in stops and wanted to transfer that learning over to digital. I don't see how measuring in stops or IRE is going to be more or less 'accurate' so long as you are using those measurements wisely.

@jmbaillard7015

11 ай бұрын

More precise in the highlights ( speculate). Advantages are: 1/ Standardization 2/ DoPs have more control on where and how they want to expose ( no DITs or other colorists intervention) 3/ If you need to come back and re-shoot, the conditions will be identical…) Did you listen to the whole interview I posted? Those guys are seasoned DoPs, if Ed Lachman patterned his system that’s because he knows he’s gonna make money out of it. Reason is: when professionals realize how interesting and worth that system is, they will pay to have it implemented in their cameras. If you’re happy with the FC stay with them.

@ianthurstan

11 ай бұрын

@@jmbaillard7015 I can’t see any interview you posted? If you post a link I’ll happily watch it ☺️