Cannon Smoke for RC Tanks Part 2
This is a new video, an update since part 2 (Cannon smoke for CL*RK, now since removed, as the previous video is redundant)
I've found out how to make the cannon smoking mechanism work reliably for CL*RK, IBU, El-Mod etc, even IR Targets!
the cannon smoke mechanism is available from my webstore:
www.rctanklegion.com/products...
Пікірлер: 107
This is one cool mod.. best rc tank dude I know of. Congrats
Brilliant stanlley great work as always 👍
That’s awesome, thanks for showing Stanlley.
Nice work Stan👍
Awesome video Bud, next week i will get my Smoke and Flash unit
@StanlleyLegion
3 жыл бұрын
looking forward to your order!
Thanks for the share but this can be done even easier by simply connecting the smoke, pump, and recoil trigger directly to the Airsoft trigger port on any TK6.0 board. Probably a 10 - 15$ job. And you can even control the duration of the smoke. Thanks Legion.
@StanlleyLegion
3 жыл бұрын
There is the specific HL smoke version of this, which I did the 1st video. I found the recoil switch method is not reliable.
Amazing
Very cool, I need one for the 1/10 scale Tiger II I'm printing!
Great work as always Stan but does the trigger switch come with a CLARK?? Or do u have to purchase it separately.
suuuper !!!
Awesome! It looks realistic with the recoil. Imagine if it works with BB.
@StanlleyLegion
3 жыл бұрын
no- can't fit the BB in there, sorry
@darkhadif8426
3 жыл бұрын
@@StanlleyLegion can you recommend any bb rc tank in malaysia?
@StanlleyLegion
3 жыл бұрын
@@darkhadif8426 All Heng Long RC tanks are BB equipped.
@darkhadif8426
3 жыл бұрын
@@StanlleyLegion ouh okay thanks for info.... I'm still new on this hobby 😅
Hello and Goodmorning from to Spain! Great Idea Stanlley, it,s the only part or opption, that we lacked in our tanks. I have both Clark, elmod and openpanzer boards, in addition to the DMDs of each Tamiya model that I have and it would not be a bad idea to try that this system could be coupled to this system because as I see the only thing that is to change a connection of the recoil, no I know how far and how this could be achieved or achieved. Thank you best regards! Antonio
@StanlleyLegion
3 жыл бұрын
in theory, as longs as your board has the cannon flash output with 2 wires, this should work fine
Great video as always Stanlley. Can you make a vehicle smoke like the target with the Tiger 1 turret on it. I mean when a tank gets hit on the 5th hit (kill shot), smoke comes out of the turret?
@StanlleyLegion
3 жыл бұрын
Possible
LOL @ the End. Thanks
Very cool! The electronics on RCs are totally new to me. I am trying to wire an fpv camera into my heng long panzer 6.0 power supply so that I don't have to run it on a separate battery. Do you have an instructional video on something like that would you? Or a suggestion on where to look for how to do this.
@StanlleyLegion
3 жыл бұрын
one of the ports supply 6v constant- perfect for FPV, it's covered in Part 1 of this cannon smoke series
@toddpickens
3 жыл бұрын
@@StanlleyLegion excellent! Thank you very much. I will watch it again
👍👍🎈🎈Super👍🎈
Hello Stanley, greetings from Holland, What does a Challenger Cost ,whit full options ,no BB gun ,but led flash and Smoke A good Smoke unit .
Do you sell the trigger board separately for people that have the older cannon smoke unit ?
@StanlleyLegion
3 жыл бұрын
yes I do, please check my website Www.rctanklegion.com
GOOD!
@user-jz3ox3fy2u
3 жыл бұрын
Thank you
@StanlleyLegion
3 жыл бұрын
@@user-jz3ox3fy2u domo-arigatou-gozai masu
that's nice. the video didn't show the color of the barrel flash. if using bright orange (absolutely no red) for barrel flash with 1/2 seconds of delay will look if Incendiary/armour piercing around had just left the barrel?
@StanlleyLegion
3 жыл бұрын
This particular flash is white
Ok. I have Clark board and wired it as in 2nd vid. So now I can use led flash plug in TK board instead of limit switch? But I dont have this little green PCB.
@StanlleyLegion
3 жыл бұрын
you need to get it from me
Can the Smoke Unit work with Taigen's V3 MFU?
Hi, how can I prime my metal road wheels, I tried different primers and it just doesn’t grip, thanks
@StanlleyLegion
3 жыл бұрын
just clean them with alcohol and use metal primers - I use Krylon spray cans
@solidtactics
3 жыл бұрын
Clean with soap and water, then use AK Interactive Fine Metal Primer.
Really nice, is it possible for 21centry RC boards?
@StanlleyLegion
3 жыл бұрын
Unfortunately I have no idea
do these work on Henglong M1A2?
Where did you get the rubber bellows for the Challenger barrel,cant find them anywhere.
@StanlleyLegion
3 жыл бұрын
I sell this on my website
@StanlleyLegion
3 жыл бұрын
www.rctanklegion.com/products/bellow-for-main-cannon-1-16
Hello Stanley, I would like to take the pump from you to simulate the smoke of the cannon, but I have a basic ibu2 from a few years ago, can you kindly explain to me how to mount your smoke pop on this board? of course after buying it from you. thank you Fabio g.
@StanlleyLegion
3 жыл бұрын
We have for IBU ;) please check my website
Stanley, can you do a video explaining all the acronyms? I'm new, and can't find any resources that I can refer to Thanks.
@StanlleyLegion
3 жыл бұрын
what do you need to know?
so when i plug the trigger board wire into the clark flash port....i already have the flash wire plugged into this port! what do i do with the flash plug i removed for that to fit in? how does the flash bulb operate without being plugged in!
@StanlleyLegion
3 жыл бұрын
the flash is plugged from the trigger board
I have a question: I left my battery plugged in on my M41 Walker bulldog for over six month's, the battery obviously was ruined and that's easy to replace, but it also ruined the plug . Where could i purchase this plug and is there a name or item number for it. Thanks for the vid.
@StanlleyLegion
3 жыл бұрын
hi! now's the time to upgrade to LiPo battery, and XT60 connectors, the white Tamiya connectors are shit anyway. Best to get a smart Lipo charger too
@monti409
3 жыл бұрын
Thanks I made these essential purchases, to upgrade all my tanks
@monti409
3 жыл бұрын
I believe i have these connectors since i also fly RC planes , but there is one observation. Why not have an onboard charging plug for all tanks. So that we do not need to flip the tank over to remove the Battery for charging. thanks again
Hi all please may i ask a question i have just got a challenger 2. i have a problem the turret turns great on the left direction but it sticks/jams when moving in the right direction not all the time and even when turret is moving slowly. Any one have any ideas how to sort this??
@StanlleyLegion
Жыл бұрын
The turret may have a sticky spot, you need to find out where exactly
@hereandthere1111
Жыл бұрын
@@StanlleyLegion hi i found out what it was, It was the wires inside fouling the gearing for the turret< thanks for your reply
What recoil systems will this work with?
@StanlleyLegion
Жыл бұрын
Most, depending on the tube clearance
@mrmanmaning8957
Жыл бұрын
@@StanlleyLegion thanks
Do you have a set for the 7.0 M1A2 Abrams
@StanlleyLegion
Жыл бұрын
Yes we do
How to make bullet bits gun in that tank?
@StanlleyLegion
3 жыл бұрын
?
Hello friend, do you have a video on how to do it in a long tank?
@StanlleyLegion
3 жыл бұрын
Hi, what is a long tank?
Hello, is this unit could be suitable for Abrams made by Tamya?
@StanlleyLegion
2 жыл бұрын
unfortunately no
@Onkelrico
Ай бұрын
@@StanlleyLegion just came across this and intrigued to try. I could simply run separate power wires to the pump through the trigger board and trigger it via the led for the muzzle flash, no?! Or is the voltage of the Tamiya flash less than 6V so it wouldn’t trigger it?!
@StanlleyLegion
Ай бұрын
@@Onkelrico you can try it should work. Usually Tamiya has no space..
Thanks for all yours greats videos, my question is, can we intalls this upgrade on Tamiya DMD module.....?? Where I must connect that on DMD module...??
@StanlleyLegion
3 жыл бұрын
Unfortunately I don't know how to do this for Tamiya DMD
@delvescoa
3 жыл бұрын
Get rid of Tamiya obsolete electronics and replace them with something serious...
I’ve got a TK7.0 challenger 2. Can this be done for that too?
@StanlleyLegion
Жыл бұрын
Yes sir
@TinyTank77
Жыл бұрын
@@StanlleyLegion Amazing. I’m really surprised you’re replying to comments from a video two years ago so thank you very much and I think I’ll look into it. Have a nice day
@StanlleyLegion
Жыл бұрын
@@TinyTank77 always happy to help
Is this firing smoke system works with BB firing mechanism ? I mean with T90- pro .
@StanlleyLegion
3 жыл бұрын
no- the BB mechanism is removed, and this is covered in my 1st video in this series. kzread.info/dash/bejne/n22lpaSolaXYqMo.html
@iftikharhussain8701
3 жыл бұрын
@@StanlleyLegion so we can not use together ... or is there possibility ? Could you please tell me how we can make smoke fluid at home ...
@StanlleyLegion
3 жыл бұрын
@@iftikharhussain8701 no, you can't use both together, impossible. we use MegaSteam smoke fluid from USA.
@iftikharhussain8701
3 жыл бұрын
Hi Stanley, could you please tell me how can I make my T-90 professional tank to water proof, I mean we can run it into little ...
when will the Smoke unit be back in stock?
@StanlleyLegion
3 жыл бұрын
soon!!
Can you please teach you how to install POWER PRO MG 90 SERVO on Henglong 7.0 thank you~
@StanlleyLegion
2 жыл бұрын
V7.0 cannot support any servo.
Will this work with the Mato Tank?
@StanlleyLegion
Жыл бұрын
Yes, get the Clark TK version
@LarryDavidshow
Жыл бұрын
Thank you Do you have a phone number to call you tomorrow to order the part or website to go to with part number? I really appreciate all the help!👍
@LarryDavidshow
Жыл бұрын
I actually went on your website your sold out will you be getting anymore in?
Do you ever review Hooben tanks?
@StanlleyLegion
2 жыл бұрын
rare enough- I did work on 2 but didn't film those.
@charlesdrain8602
2 жыл бұрын
@@StanlleyLegion what do you think of Hooben tanks
@StanlleyLegion
2 жыл бұрын
@@charlesdrain8602 poor quality!
could you combine this with recoil also?
@StanlleyLegion
3 жыл бұрын
Yes of course
@StanlleyLegion
3 жыл бұрын
The cannon is recoiling too if you watch the video
Do you know who sells a 1/16 scale m60, or m48 tank?
@StanlleyLegion
3 жыл бұрын
nobody made these tanks, but I know of conversion kits based on the M26 Pershing
@j1035ak
3 жыл бұрын
@@StanlleyLegion okay what are they
@leeleehon4667
3 жыл бұрын
So special 👍👍👍👏👏😘
@PieAndChips
2 жыл бұрын
DKLM OKMO produce a semi 3D printed M60 kit
Screw your mask comment at the end. But i have a question, how do you maintain 360 rotation with a smoke tube going up to turret?
@StanlleyLegion
2 жыл бұрын
You don't. The wires and tubes will twist, just unwind the turret
Make it work on T-72