I am disgusted with the vast footprint standards. This industry should have elected to have two standards, SMALL and LARGE. That’s it. So stupid.

What threads are supposed to be used to mount a 507comp to the tti combat? The screws that came with mine wont engage the threads of the canik tti combat

@calculatedkinetics4026

6 күн бұрын

@@HazardousRob you need to use 6-32 screws. We have some that are 11.3mm long and provides great engagement. We haven’t experienced any thread issues with the RMR screw holes but have had a handful of customers who have had problems with machining on the slides.

@HazardousRob

5 күн бұрын

@@calculatedkinetics4026 i used the 6-32 screws like you said and they worked great, thank you. I used the m4 screws that came with the Canik because it said to do so and couldnt get any engagement.

@simpleflipR6

16 сағат бұрын

@@HazardousRob they’re engineers aren’t so bright they didn’t think. That pistol doesn’t deserve a 500+ buck optic lol

I was trying to put an olight osight on my tti ?? But seems the screws are to short have u heard any problem with this an if so do yall sell any screws that would fit ?? I have used yall before bought a plate for my elite sc an still use it its great ...thanks for ur time!!

@calculatedkinetics4026

6 күн бұрын

@@jordansuarez7556 it is a problem with that setup. The screws that they use have a custom head. We have some that are close but not the same head angle.

@calculatedkinetics4026

6 күн бұрын

@@jordansuarez7556 and thanks for the order!

@jordansuarez7556

5 күн бұрын

@calculatedkinetics4026 the screws yall have will they work tho?? If so I'll order them?

@calculatedkinetics4026

5 күн бұрын

@@jordansuarez7556 yes! You want 6-32 x 11.3mm under our hardware selection.

@calculatedkinetics4026

4 күн бұрын

@@jordansuarez7556 yes they work! www.calculatedkinetics.us/collections/gun-accessories/products/optic-hardware?variant=48387549135142

I wonder if you can run an optic, and still use the iron sights?? Just in case the red dot does not work - would you still be able to use zhe iron sights while the red dot is attached? Thank you!

@danielbrunner7730

Ай бұрын

Yes you can definitely co witness depending on the optic you get. I bought the MeCanik MO3 which in my opinion is their attempt at an SRO. I'm barely able to cowitness with it but i don't plan on carrying it ever. I bought the Mete SFT so i put a light on ut and carry that instead! I actually traded in my TP9SF to make room for the TTI but them figured i would never probably even be able to see one in person for at least a year so i ordered the Pro... Then a week and a half later one of my local dealers called me on the way tho work saying they had one and i was first on their list! So within 2.5 weeks i purchased the pro and TTI! LoL oh well right 😂. Also i personally prefer the MO3 over the SRO and you can also find it you had for a half to a this

@florianwagner5535

Ай бұрын

@@danielbrunner7730 Thanks for the info

@simpleflipR6

24 күн бұрын

Am guessing you’re planning to carry and compete with it. You need the higher sights to do that

Does the tti work with the 508t without a plate

@calculatedkinetics4026

5 сағат бұрын

@@St.Louis_81 technically you could but if you ever bumped the optic, you could knock it off zero as you have 2 flat surfaces and no front and back bumpers to keep it centered. You need the recoil lugs from plate to gun and gun to optic to keep it straight and zeroed.

@St.Louis_81

5 сағат бұрын

@calculatedkinetics4026 what optic can I run that I'm able to co witness with

Delta Point Pro for M&P?

@calculatedkinetics4026

2 ай бұрын

In the lineup! Probably mid July sir.

I want to know who makes those co-witness sites? 👀

@calculatedkinetics4026

Ай бұрын

Night Fision. These are prototypes, we are working with them to make them just a hair shorter for the best co witness.

@toddbernal2183

Ай бұрын

@calculatedkinetics4026 thank you!! I'll br on the lookout for them!

Piece of junk can’t even get the mounting plate right. No 507C, 507K, vortex doesn’t fit on it. Yet manual says it does. I would take any of my SRO off knowing none of your screws work it’s not long enough. Who engineered this junk? CZ p10 competition, sig Icarus, zev hypercomp, zev long pistol, cz shadow 2 are all better choice than this in terms or quality and reliability build.

@calculatedkinetics4026

24 күн бұрын

@@simpleflipR6 you sound frustrated. Shoot us an email so we can help you resolve this. calculatedkinetics@gmail.com

@simpleflipR6

24 күн бұрын

@@calculatedkinetics4026 I sent the trash back already something else is wrong with it. I have other pistols that I can use. My hypercomp and long zev shoots better. The cz s2 and p10 competition is better than this. Slow pistol. Made a mistake of bringing this to shoot along with my scheckmate and erebus 😂

@simpleflipR6

24 күн бұрын

@@calculatedkinetics4026your idea is actually better than Caniks engineers. You need w holes there or any other optic with the plastic lock in the back. Their adapters wouldn’t work on 3 optics. I’ve come across this problem before with CZ and other pieces that’s not easy to get

@simpleflipR6

20 күн бұрын

@@calculatedkinetics4026 Canik confirmed that the 507, 407, vortex optics does not fit because they only have screws provided that doesn’t fit so you have to buy a separate t10 screw and different length t20 just in case. If your gun wiggles it’s because you need rear studs flushed on there or the screws are not long enough. Too long night cause your gun to malfunction. Shadow system also had that problem the screws had to be of perfect length. .02 cents on your video if you sell the footprints. I will grind their adapters down and drill another hole to make it fit lol

@calculatedkinetics4026

20 күн бұрын

@@simpleflipR6 what exact optic (407c, 407k, 507c, 507k, RMR, ETC) and what exact model of gun canik mete or TTI are you trying to run? We may have a plate for that so you don’t have to drill your gun.