This is the best explanation against shooting a 40S&W to a 10mm gun. I watched several videos on You Tube advocating shooting a 40S&W to a 10mm gun. This so called experts should pull their videos immediately. Common sense dictates that shooting an ammunition NOT indented for firearm is dangerous and ill advised. Very good presentation. Thank you sir,

@rangehotcom

Ай бұрын

Thank you very much. I appreciate your kind words.

@barelylewd4549

13 күн бұрын

Glocks can safely shoot 40 s&w, other pistols not so much, shooting 40 s&w out of a 10mm Glock you lose about 15 fps, so not much, just because someone can make a video about something doesn't mean they know what they're talking about, as far as accuracy, it's barely effected.

@rangehotcom

12 күн бұрын

@@barelylewd4549 incorrect. Still headspacing off the extractor.

A good rule of thumb: if something can kill you or seriously harm you, use it as designed, dont push it beyond what it was designed to do. This goes for anything, not just guns.

@rangehotcom

4 жыл бұрын

That is excellent advice for sure.

@jefife750

8 ай бұрын

@@rangehotcomyeah, but there’s always “that guy”!

Based on your thorough explanation of why you shouldn't shoot 40 out of your 10, I subscribed to your channel. Your the first guy I've come across to mention the wear & tear on the extractor. Good job.

@rangehotcom

2 жыл бұрын

Thank you very much Eric.

@myrealfakename6068

2 жыл бұрын

Same here.

@joer6525

9 ай бұрын

#metoo

@henryettacollins9095

6 ай бұрын

That's dumb cuz it would be less than the wear and tear of the 10 mm science science science

Your head spacing explanation was exactly what I expected to hear and verified exactly what I suspected, even given my limited experience with the issue at hand. Good video with good advice.

@rangehotcom

2 жыл бұрын

Thank you very much Wayne.

@domsugar9160

Жыл бұрын

Not enough to stop shooting 40 in the 10mm at the range understandable not to depend your life on it but at the range why not. Extractor problems? It's the same width? But why not make a video not to I understand likes views👍

@diceydie-c

Жыл бұрын

I was under the assumption the extractor would keep the 40 casing with the same headspace as the 10 mm is that not correct? Because the picture you have in the video is the bullet down in the barrel without the extractor holding it in place

@henryettacollins9095

6 ай бұрын

Yeah the extractor thing is bullshit. It's the same size and less kinetic energy. It's for sure going to bring and the sky is falling chicken little

A couple of years ago I ran about 100 rounds of 40 through my 10mm as an experiment. I had no ignition problems but a lot stovepipes because the round doesn't have enough power to compress a 10mm recoil spring. Other than that I have no permanent issues. I knew about the powder residue problem so I cleaned out the chamber after the range session.

@rangehotcom

3 жыл бұрын

John, I believe it would take far more than a 100 rounds to do any real damage but knowing you can get away with 100 rounds is something.

@thisismagacountry1318

2 жыл бұрын

Would +P 40 cal ammo have the cycling power you mentioned?

@bryson1992

Жыл бұрын

@@thisismagacountry1318 Thats a good question, i would assume so

@diceydie-c

Жыл бұрын

The Recoil spring isn't different unless you bought a different recoil spring but Glock OEM is 17 lb 40 or 10 mm

Excellent explanation! Best I've heard! I bought a Glock 20 and was tempted to shoot my 40 ammo in it. Thx for helping me not make that mistake! I'll get a 40 barrel!

@rangehotcom

4 жыл бұрын

You are very welcome Matt. Good call my friend.

@CALVINLNIKONT

3 жыл бұрын

I bought a Ruger Single-action 10mm revolver with an extra .40 S&W cylinder. I don't have to chase my brass! I have shot .40 S&W ammo out of my Glock model 20, 10mm and it works just great. Other guys have shot 25,000 rounds of .40 S&W out of their 10mm pistol and have never had any extractor problems. The recoil pushes the brass back toward the extractor and doesn't put any wear on the extractor. What would happen if you shot some 10mm ammo that had brass that was trimmed a little short? NOTHING ... ABSOLUTELY NOTHING!!! calnikont.com/extrastuff/the4552zulugun.html

@texasbeast239

3 жыл бұрын

Just stock up on the weak 10mm loads for practice. Don't try to make your gun something it ain't just by shooting something else out of it. I had people recommending .40 to me as my practice round, but I thought they were stupid for saying that. I didn't get me a .40. I got me a 10. You remember that Spinal Tap movie? Well this one goes to "10", mate!

@truthrecon4404

3 жыл бұрын

Got a 40 kkm for my g29, play it safe.

@westwoodsouthdenver9613

2 жыл бұрын

@@CALVINLNIKONT 🐎 💩

I agree ... if the barrel says 10mm ... duh it's 10mm

@rangehotcom

4 жыл бұрын

Keanon, one would think it is just that simple huh? I look at it exactly as you do and yet so many folks insist it is fine and will not ever be a problem.

@sandiego7433

3 жыл бұрын

Just like 357 and .38 it just has to be hot 40 ammo

@KeanonGilliamSlang369

3 жыл бұрын

@@sandiego7433 You can switch barrels out but it's not advised to use the calibers interchanged.

@johnterry8958

2 жыл бұрын

@@sandiego7433 Looks like you didn't even watch the video and learn why it damages the gun using 40 S&W in a 10mm, NOT AT ALL like using .38 in a 357 mag.

@KeanonGilliamSlang369

2 жыл бұрын

@@aj-uy6br You're preaching to the choir! I agree with you 💯 👍

Thanks for the very informative and honest explanation. I was going to use .40 out of my glock g40 because of a few other videos I watched on KZread until watching your video I now have a true understanding of what damage is actually happening. much appreciated thank you sir.

@rangehotcom

2 жыл бұрын

You are very welcome Gabe.

This guy should run for president. He's very point blank simple in his explaining the situation. Breaks it down to where even a toddler can understand. I like that!

@rangehotcom

2 жыл бұрын

Thank you very much Willie. I will let you know when I through my hat in the ring for president.

💯brother! One thing I learned at an early age that has served me well in life is ‘just because you can do something doesn’t mean you should do it’. This is especially true when it involves anything potentially dangerous.

@rangehotcom

Жыл бұрын

You are exactly right.

It took me a while but I was able to navigate the page and I was able click subscribe. I had to use my gps to get me there, however I did it. Also I never shot 40 Strong and wonderful out of my 10 mm Colt Double Eagle.

Maybe, just maybe, a 10mm would make a fair choice for a shtf weapon. In a pinch being able to shoot 40 cal if 10mm wasn't available to protect yourself or feed your family could be a benefit. As long as you can obtain the proper ammo I agree there is little to no reason to shoot ammunition that is not designed for the weapon.

@twestgard2

2 жыл бұрын

But if that’s the strategy, you’re best off to select the most common caliber around, which for most or all of us is 9mm. It’s definitely not 10mm or .40S&W.

@twestgard2

2 жыл бұрын

@Atman Gotango ha, sure, but which obscure ammo should you buy the gun for?

@clist9406

2 жыл бұрын

In a SHTF moment, the chance of you finding 10mm is slim to fcking none. You will find plenty of 9mm for your chic gun

@henryettacollins9095

6 ай бұрын

It isn't something you should just expect, One shouldn't just try. Jamming rounds into guns to see if it works, but if you're 20 30 years or 20 30 guns in the shooting and you're looking to add something that works with other things that you got asking, this question doesn't deserve a belligerent answer. Especially if you like carbines and pistols or 357s and 38s

One of the best reloading posts I have seen in a while Congrats! And you are absolutely correct in responding the way you did . Nice photo on the start which shows the problem.

The Gospel is preached here. Well done, mister.

@rangehotcom

4 жыл бұрын

Thank you very much.

You just earned a new subscriber my friend, for 1- great breakdown of the reasons why one shouldn’t use the incorrect ammo “just because it fits and fires” (just because you can don’t mean you should) & for 2 your chastising of me for watching your videos without being subscribed was absolute truth so I navigated to the sub button and hit it, and turned on all notifications. Much love from Tennessee my brother 🤜🏻🤛🏻

Glad I tuned into your valid advice. Been loading rifle for a long time and picking up my first handgun .40S&W today . . . GLOCK 29 for a New Year's present a few months down the line and I'll be handloading both. Thanks for the video!

@rangehotcom

3 жыл бұрын

You are very welcome James.

Great commentary. I own both calibers and would only try using .40's in my Glock 20 in the most dire of circumstances.

@patriot4life386

3 жыл бұрын

I shoot lots of 40's out of my Glock 20, but I first change the barrel to a Lone Wolf 40 cal conversion barrel. He is totally correct about damaging the extractor.

@rickyjohnson9594

2 жыл бұрын

I wount stop it's not for a 10 mm he right fre boar space mades it not shoot true and it's wereing it gun out extrater

@desertsoldier41

Жыл бұрын

I have put thousands of rounds of .40SW through my Glock 20. The pistol can handle almost double the chamber pressure of .40sw. My extractor is fine. Also most 10mm ammo now is basically .40SW anyways. so who gives a shit. I can also link you to an Austria Mil TM where .40SW is an adequate alternative to 10mm. There is no difference in accuracy compared to my G23.

Thank you, this is what I've been saying for years. In a parallel universe I have seen 460R cases with the mouths ripped off because they were running 45 ACP. The shorter ACP case creates a carbon ring and then comes the high pressure Rowland that gets traction on the ring. Same smell, different flavor.

@rangehotcom

11 ай бұрын

Exactly right.

Agreed. Just because you can doesn't mean you should.

Nothing like a straightforward video with no cheesy music and animations to get the point over👍

@rangehotcom

3 жыл бұрын

Thank you very much.

That’s wild cause I was wondering this for a long time because I’ve been hearing people say that you can do it and no one Has yet to explain the damage it could do..Ive been KZread researching it for the past two weeks now....I was going to try it this weekend......I truly appreciate this man.... please continue doing what you’re doing… Keep up the good work brother

@rangehotcom

3 жыл бұрын

Thank you very much my friend.

I subscribed because of your ability to clearly and accurately explain a relatively complex topic. You're legit.

@rangehotcom

2 жыл бұрын

Thank you very much, I appreciate that.

Wow! That was the best explanation for that question. Period!! Thanks!

@rangehotcom

2 жыл бұрын

Thank you very much.

Most intelligent explanation I've seen so far on this topic. I am dismayed by all the videos I see about it just to save some coin only to ruin their handgun.

Thanks for the clarification. I was thinking about buying a 10mm pistol because I could shoot both calibers out of it .. but glad I checked here first. Can't get something for nothing in this world .. and nothing is for free.

@rangehotcom

3 жыл бұрын

Amen Bob. You can always get a .40 barrel for your pistol though.

I have a lot of .40 ammo leftover from 25 years in LE. I have a Glock 10 mm and just ordered a Ruger SR1911 10 mm. I’ve been researching this topic and have watched a lot of videos. This is by far the best explanation I’ve come across. I agree, I’ll stick with shooting .40 out of my 40’s. Oh, and as far as subscribing, I don’t subscribe to much because I think content creators are out of control and there are too many wannabe tactical Jacks putting out useless and incorrect information. I watched a couple other videos from this channel that I also thought were very helpful. I’ll be adding this channel to my short list of subscriptions.

@rangehotcom

7 ай бұрын

I truly appreciate your kind words and subscription. I will do my best not to let you down. However if you see an issue please bring it to my attention. Again, thank you and welcome aboard.

A buddy of mine who’s a gunsmith told me the same reasons you just mentioned 👍 can you do it? Yes. Should you? No.

@rangehotcom

Жыл бұрын

I am glad to hear my info checks out. Thank you.

Common sense, no nonsense, experienced answer. Thank you. I once accidently fired .380 ammo out of a 9mm. Yes, it will fire but the discharge does not always cycle the slide and you will get Excess powder residue so that when you go back to 9mm the gun jams.

@rangehotcom

9 ай бұрын

Exactly the same principal.

I would say shooting 40 S&W out of something like a Glock chambered in 10mm is one thing as you can get a new replacement barrel and extractor probably for $120 to $150 or so….. but out of a nice higher end 1911… I would say NEVER EVER!! Good points made brother, very well stated.

@rangehotcom

Жыл бұрын

Thank you very much my friend.

I've seen people doing this recently, I got hyped for getting a 10mm as "versatile" to go with my M&P40, but you bring up many, many good points on it. No way am I going to risk a CMMG Banshee on this lol. Thanks for sharing :) Maybe in some sort of emergency and all I had was .40 S&W...

Thank you. Message received. Hadn't done it but in the time of 2021 and ammo shortage I ended up here for advice.

Just bought glock 29, I was going to shoot up the old 40 cal ammo I had laying around since getting rid of all of my 40 guns, NOT NOW!! THANKS FOR THE INFO.

@rangehotcom

2 жыл бұрын

Anytime my friend.

I am thinking about getting a glock 20 in 10mm Auto, but also a conversion barrel for .40 S&W and a complete slide for .45 ACP. You can have 3 different calibers on one frame. I like that idea.

@rangehotcom

6 ай бұрын

That is the best way to do it.

This too is one of my pet peeves as well. The 10mm is one of my favorite rounds so I too often hear people claiming it perfectly ok to run 40 S&W in their 10mm and when I bother to respond I'll point out everything you did in this video. Technically it works, just like it technically works firing a .380 Auto out of a 9mm Luger, but it's not a good thing to do unless it's an imperative (i.e., post apocalypse supply issues or something of the like). The only reason I can figure why shooting the 40 S&W out of a 10mm has become so popular is the lack of commercially manufactured practice/target rounds, which is why I got into hand loading. I hope your video becomes the stock response every time somebody asks if it's ok to do.

@highxj

Жыл бұрын

It's nothing like shooting a 380 out of a 9. The 380 case is straight walled and smaller diameter, and will bulge and possibly rupture in the fatter 9mm chamber.

I TOTALLY AGREE, Thank You this needed to be said long ago!

You are the only one who explains why it's not a good idea. Good advice. Thanks.

@rangehotcom

3 жыл бұрын

You are very welcome.

Not gonna lie, subscribed because of "hotter n fish grease". I do also appreciate you explaining to the masses about how an auto does headspacing. Good job.

@rangehotcom

3 жыл бұрын

Thank you very much, Durwood. I appreciate the kind words.

"Horseshit! Don't do it." 🤣

I agree totally but it is nice to know in an emergency that you can run 40s But I would not make an habit of it

New subscriber here. Thanks for clearing that up. I have a .40, thinking about getting a 10mm. Now I know it won't be a used 10. Didn't realize there were shooters doing that. Been reloading since Clinton was in office. He's actually the reason I started. It ain't as cheap to get started as it used to be. But if I had a 10mm and wanted .40 ballistics, I'd just download the 10, staying within the loadbook specs.

@rangehotcom

8 ай бұрын

You are very welcome.

Thanks. I was on the fence about this, but I'm glad I saw your video. Very informative with good reasoning.

@rangehotcom

2 жыл бұрын

You are very welcome my friend.

This is the first video of yours I've seen and it was solid info with no B.S....im subscribing

@rangehotcom

3 жыл бұрын

Welcome Dick, thank you very much.

Very well said. I just purchased a RIA 1911 FS Tac II in 10mm and that is all that she will ever see. I do reload and do it regularly for my 9mm's and 45ACP. I have all the dies for the calibers of guns I have and will be reloading for .38 Super, 10mm, 50AE, 30.06 and last but definitely not least, my .50BMG AR-50.

@rangehotcom

3 жыл бұрын

Excellent collection and thank you very much for your kind words.

@frankmmiii

3 жыл бұрын

@@rangehotcom It was my pleasure and Thank You for passing on valuable information. I just saw a video where the guy loaded his 10mm 1911 with 10mm, fired off a magazine, then loaded another filled with .40 and fired it off without a hitch. Seeing that video would make someone think it is OK to fire .40 caliber out of their 10mm pistol.

@rangehotcom

3 жыл бұрын

You can do it, but on the long term it is not good for the gun.

Awesome, explaining why not to shoot 40 short & weak min a 10mm. I had 40...and I love the cheep, available ammo. Absolutely nothing wrong with it with some Underwood ammo. However I’ve moved on to the 10mm.

@rangehotcom

3 жыл бұрын

Thank you very much Michael.

Best reason I have heard so far

I am glad to hear you say get a conversion or proper barrel to put in the gun for converting from 10mm to 40s&w

Good video. It's nice to see someone on KZread who knows "why" they believe what they believe.

@rangehotcom

9 ай бұрын

Thank you very much.

I had a hillbily friend who trimmed off a 3mm long ring off a steel 10mm case. He then inserted that into the chamber. This allows him to get proper headspacing for .40 S&W when he wants to use it, because it will headspace off that insert. Pretty slick, huh?

@rangehotcom

Ай бұрын

I wouldn't trust it.

Great information. Well reasoned and delivered.

@rangehotcom

3 жыл бұрын

Thank you very much Rich.

Accurate info, well said. There is only a few in world that take the time to educate the masses of this gun ignorant world. Thank you!

@rangehotcom

3 жыл бұрын

You are very welcome my friend.

Very good info and great explanation of why you should not shoot the 40 through your 10mm.

@rangehotcom

3 жыл бұрын

Thank you.

Sir, you are absolutely correct....and fun to watch / lesson to. It's like talking to an old friend......Because of this I have subscribed.

@rangehotcom

7 ай бұрын

Thank you very much. I appreciate that. Welcome aboard.

One of the things you didn't mention, is some brands of guns can fire out of battery. If you build up a carbon ring by shooting 40 S&W out of a 10mm, can possibly cause a catastrophic failure.

@rangehotcom

2 жыл бұрын

David, you are correct.

you are right on people do not understand about your point even if it still shoots good the extractor and espeically the chamber will over time be damaged. you know its about gun owners think they can save money by not having to buy two guns. They do not understand a revolver handles a shell size different the an auto

Exactly right! Can you? Yes. Should you? No.

@rangehotcom

2 жыл бұрын

My point exactly.

Awesome video brother. . I just bought a G40 as was thinking of using. 40 caliber. But after this video I will just shoot the 10mm

@rangehotcom

3 жыл бұрын

Thank you very much Joe. You can always get a .40 conversion barrel if you want to run .40 in your G40. Lone Wolf does a good job with them.

Great informed and educated response backed by great science. I think I will def pass on trying .40 Short and Weak out of my Grand Power P40 10mm with the rotating barrel. Its my favorite pistol next to my CZ Shadow2. With that rotating barrel, it feels like a 9mm +P with original power 200-220gr loads going 1250fps.

@rangehotcom

3 жыл бұрын

Thank you very much Patrick. I appreciate your kind words.

@rangehotcom

3 жыл бұрын

Oh and I love those CZ pistols as well.

Solid advise best ive heard in a long time for firearms on youtube. Thank you.

@rangehotcom

Жыл бұрын

You are welcome Nathan.

Im glad I found your video. I was debating on buying 40sw to practice with. But now I'm not. Thank you!

Thank you for giving the technical explanation on this subject!

@rangehotcom

2 жыл бұрын

You are welcome my friend.

People have been doing it for years with 100% success in Glock 20s and 40s, I cannot speak for other 10mm semi auto pistols.

@rangehotcom

2 жыл бұрын

Yea, basing fact on what humans have been doing is futile at best.

Thanks sir very good info maybe people will listen maybe not but you put it out there for all the newbies thank you again for touching on this one sir great channel

@rangehotcom

4 жыл бұрын

You are quite welcome Les. All you can do is try.

I could substitute tinfoil for a blown fuse, and it'll work. I don't think the outcome will be desirable, but it will work. My findings conclude that there is no substitute for precision, tenacity, or morality.

The most intelligent explanation I've heard yet. Thank you!

@rangehotcom

Жыл бұрын

I appreciate your kind words, thanks.

just picked up my 10mm and only ammo 10mm super understood bro rock on firearm jesus

@rangehotcom

14 күн бұрын

@markeffend165 thank you very much my friend.

This happened 10 years ago. vendor at the gun show trying sale 40 sw to a customer looking for 10mm. He stated that it's the same.

He's right I've done it a few times but he's Right again in every way he described

@rangehotcom

Жыл бұрын

Thank you very much.

Thank you for the best explanation that I've heard.

Thank you for a solid straight answer, ive been in the market for a 10mm, and everyone says its too expensive, unless you run 40 through it......I got a 40 for that dummy.

@rangehotcom

2 жыл бұрын

You are welcome Shannon.

Never seen your channel before but this was a good in-depth explanation. Shows me you know what the hell you're talking about.

@rangehotcom

2 жыл бұрын

Thank you very much.

man i love this man thank you so much and thanks to you tube for promoting your video i just came across am glad that i will definitely not being doing that all thanks to you .

@rangehotcom

2 жыл бұрын

I appreciate your kind words.

@theoversphere7023

2 жыл бұрын

@@rangehotcom always chief I love how you broke this down very well the haters can't handle you because you too real but I can and appreciate you 💯 for that . Subb

@rangehotcom

2 жыл бұрын

Welcome aboard my friend.

Excellent straightforward explanation.

@rangehotcom

2 жыл бұрын

Thank you very much.

Finally! Thank you!

@rangehotcom

3 жыл бұрын

You are welcome my friend.

Your right.

Thanks. I appreciate your outlook on the subject. I have not fired any .40 out of my Glock 29 yet. After watching your video I won’t be doing it.

@jimgordon3206

Жыл бұрын

Besides that I bought 10mm for the power. Shooting .40 seems like a giant step back.

@rangehotcom

Жыл бұрын

You are very welcome, and good call.

FK BRNO not only says .40 can be shot of their PSD pistol with the 10mm configuration without changing anything (barrels, magazines etc.), but actually encourage people to use it. It means the damn pistol can shoot 10mm, .40, 7.5 FK AND 9mm. Wow.

@DanTheWolfman

2 жыл бұрын

@@natetyler5565 Do you believe that is same for 1911 pistols, as well as others, or just the FKinBruno? U believe no major issues, even with 1911's whose extractor can get a bit too loose? I'd do it in a glock, wondering if could be done a lot in a Ruger 1911 or a Tangfo Witness, or just in the Bruno on a pretty regular basis or not? thanks

@DanTheWolfman

2 жыл бұрын

@@natetyler5565 not gotten into 10 yet buy when do want to be able to shoot .40. A gp100 maybe is first

@DanTheWolfman

2 жыл бұрын

@@natetyler5565 is that witness good ? Looks awesome in stainless. What is stock spring rate and can u shoot .40 no problem stock or what? Same barrel mags etc right ??? Thanks would u recommend that or a ruger 1911 10mm to often shoot .40?

10mm is the bomb!

understood bro 10mm only you just saved me money and im subscribed

Thanks for the lesson. Your very correct sir

Best explanation I've ever seen

@rangehotcom

3 жыл бұрын

Thank you very much, Jonathan.

Just because ya can don’t mean you should…just sayin’. You are spot on!

You are so right. It might blow up. They build to spec..

Don't shoot ammunition "..that ain't the gun won't meant for". Cheers to that bit of advice. 🍻 Hillbilly Lingo... I can make fun because I are one. 😉

That's the bare assed truth, I've been shooting and reloading for 40+ years. Most don't understand!!!!!!! Keep telling it like it should be!!!!!

@rangehotcom

3 жыл бұрын

Thank you Rick, I appreciate the support.

U said it right bro. 100% correct.

I really enjoyed your explanation! straight and to the point not beating around the bush excellent! don't put Volkswagen beetle wheels on a Cadillac Escalade enough said, thank you again for your video!

Subbed all and liked this morning, great explanation...

@rangehotcom

2 жыл бұрын

Thank you very much Chris.

I agree with getting an aftermarket barrel to run .40, and I assume the short and weak comment is tongue in cheek.

@myrealfakename6068

2 жыл бұрын

If you don't already know about it, may I recommend that you research the origin of the 40 Smith and Wesson? In doing so you will quickly discover why it is often referred to as Short & Weak. Cheers! 🍻

Thanks for the breakdown.

You are soooooo right!

Great information. Thank you.

@rangehotcom

3 жыл бұрын

You are welcome, Andy.

Never did this but always wondered... I think the 5.56 vs 233, 7.62 vs 308, 45LC vs 410 shootgun, etc... was pushing me to risk it. Like the rifles... the gun is made for the more powerful round so it show take the 40 without blowing up {which might be a topic all on it's own). After your video... will stay away. Your right and it's pure commen sence. Not sure how the judge 45LC/410 fits into this but a assume the 410 round has something to due with it. Thank You!

@henryettacollins9095

6 ай бұрын

I think you probably hit the nail on the head. There's such a thing as close enough and things can be within a tolerance and be fine. But if you have a pocket protector and you think Kimber is the only gun worth buying yeah whatever eat me

Very good advice.

Moral of the story. You can but please don't.

I don't own either caliber ; but that was a very clear explanation of the issues . I can't see if people care for their firearm , they would do that. Maybe to save your life if zombies are approaching. Before I knew better , I have dropped a round in the chamber on a 760 remington 3006 pump and maybe my 1911 a couple of times then jammed the bolt or slide home. I learned how un-cool that was.

@rangehotcom

4 жыл бұрын

Yes, the push feed bolts so not care for snapping the extractor into the extractor groove. I have done it myself, as we all have to learn. I would agree, in an emergency you do what you have to do but for standard range use and such keep the .40 out of your 10mm.

Good info, Hunter. There are lots of KZreadrs showing the world the wrong thing to do with your 10mm. Shoot 10mm am from your 10mm platform. Buy a 40 Cal to shoot your 40 Cal ammo.

@rangehotcom

3 жыл бұрын

Thank you, Douglas.

Awesome right on.

I have recently purchased my first 10mm pistols. I picked up a 1911, and a Glock 40 .10mm. I suspected exactly what you discus here. Just because you can, doesn't mean you should. Thanks

@rangehotcom

Жыл бұрын

You are welcome.

Great Video !!

@rangehotcom

2 жыл бұрын

Thank you very much.

Just subscribed I already knew never shoot different calibers thru one side arm buying a new gun to replace a awesome gun cause their using 40 in a 9mm and vise versa is plain stupid you called it bro I love ya

@rangehotcom

3 жыл бұрын

Thank you very much Mark. Welcome aboard brother.