Download MARVEL Strike Force on iOS & Android and battle in the MARVEL universe here: pixly.go2cloud.org/SH31K . Thanks for watching! What should we make next ??

@jordanezell5132

2 жыл бұрын

Will you please try to make a balisong sword?

@grahck4391

2 жыл бұрын

Awesome job! I'd love to see you guys try the kurgen's sword from the first highlander movie.

@thecosmicknowingknowing3099

2 жыл бұрын

You guy's FN ROCK.......BOIIII. PERIOD POINT BLANK, OOPS BAD HUMOR ON MY PART.....

@Paradox-vk9fe

2 жыл бұрын

Awesome work still hoping for the Katan from the original highlander movie

@BlackStarZero19

2 жыл бұрын

Do a historical build next like a tetsu-ken. The testu-ken is basically a truncheon shaped like a wakizashi and it has no sharp edges.

The two of you are what got me watching Man at Arms. I can't watch it without you in it. Your builds are so much better and you show alot of the work that goes into the builds. Keep up the work.

@ThatWorks

2 жыл бұрын

Thank you so much! That means a lot to us!

@0zux45

2 жыл бұрын

It's the same for me!

@JimIBobIJones

2 жыл бұрын

Have they left the show over at AME? Haven't seen either of them in the new Man at Arms videos and is a real shame!

@Nukem962001

2 жыл бұрын

Same for me

@knallpistolen

2 жыл бұрын

same here

Oh man! You made it out of TITANIUM!!! Thats awesome! One time, along time ago, I thought about doing a sword out of titanium but decided cautiously see how a knife went before jumping into the sword. I stopped at the knife cause that is no JOKE! Keep the forge lit!

@ThatWorks

2 жыл бұрын

Yea it sucks to finish. Fun to forge, but no fun at all on the grinder.

@Slum1776

2 жыл бұрын

Soon as I saw titanium I immediately thought I wonder if Timothy Dyck has seen this lol

@MrZetor

2 жыл бұрын

@@ThatWorks "Fun to forge" - Utter bulls*it! Forget the idiotic CP grades and try forging at least Gr5. Not fun at all!

@bmxriderforlife1234

Жыл бұрын

@@MrZetor ......certain grades of titanium are just no fun to work with in Any way shape or form.

The passion that the team has for bladesmithing really shines through in the final product. The level of skill and attention to detail on display is awsome to watch. Thanks for another great video.

@ThatWorks

2 жыл бұрын

Thank you Eli! The final 10% of the finishing can really make or break a project

From an actual ingot into a sword, now that's really cool!

@ThatWorks

2 жыл бұрын

Yea when that bar of Ti showed up I was like...Neat! This will be fun.

@rodyhmar8034

2 жыл бұрын

Tamahagane is cooler😎

@mcshortking3632

2 жыл бұрын

@@ThatWorks n

i love to watch Ilya forge something. Watched the Episode "Forged in Fire" where he won with his amazing shield. Stunning. Keep up the awesome stuff you do!!!

@ThatWorks

2 жыл бұрын

He doesn’t back down from a challenge that’s for sure!

27:28, I SAW THAT... I SAW IT!!

@ThatWorks

2 жыл бұрын

Retractable !

@madrrio

2 жыл бұрын

@@ThatWorks HAHAHA!!🤫

(possibly spoilers) if i remember right, even in the hawkeye series you first see the sword in a scabbard. and if i also remember, the retraction works not only in lenght, but also width, so it actually can go inside the handle. but having it as a properly made solid piece definitly is better! i think they did the retraction thing in the series so the guy who took it home first could do so more easily.

@chaos_omega

2 жыл бұрын

They should have just given him a longer coat, would have been cheaper.

@ThatWorks

2 жыл бұрын

Its like they haven't seen Highlander or something.

@DivyanshusCreation

2 жыл бұрын

@@chaos_omega i have made Retractable one 😉 You can check it out

I love CNCed aluminum, myself, though I'm beginning to imagine how Hawkeye's sword would feel, if the handle were triple-butted aluminum. 😄

@ThatWorks

2 жыл бұрын

Its neat what you can do with it and how fast you can do it!

TIL titanium scale turns green. A really nice quirk that makes it easily visible that you're working with a totally different material, even if it's white when hot and grey when cold like almost all other metals.

Nice job guys! I was committed do a knife out of a titanium rod that was removed from the guys leg recently. This gave me some good ideas of how to go about it...along with the advice of Master Schwarzer! Keep it up

@katsumiskytower8714

2 жыл бұрын

thats really cool, I have a 440 stainless steel plate in my hip that I would LOVE to make a knife out of someday :)

@iansmith8944

2 жыл бұрын

Make sure you know exactly the grade of titanium you have as each can have very different properties. It’s not a great idea to forge titanium since titanium dioxide is absorbed deep into the metal and weakens it. Would be a cool piece just to have but extremely unpractical.

@ThatWorks

2 жыл бұрын

Steve is the man! How did it turn out?

@craigwiess1656

2 жыл бұрын

How did you get the rod? Hospital wouldn't let me keep the titanium from my shoulder replacement. Was wanting to make a jockey shifter for my bike put of it, 7 more years before they replace the shoulder again.

@katsumiskytower8714

2 жыл бұрын

@@craigwiess1656 its still inside me, im not sure how im going to keep it, i might have to steal it idk lol

So happy I found this channel. You two were the best part of man at arms and I'm glad you stuck together to do a new channel

Just found out today that yall were thankfully still doing videos over here, Man At Arms was never as good without yall, so glad to be able to watch you're quality videos.

You guys do awesome work!!Ilya’s skill forging out the tip on the power hammer and Matt’s grinding skills!! Thanks guys

@ThatWorks

2 жыл бұрын

Thank you!

Great work Ilya always does amazing work on the fordge I've learned so much from watching your channel

Nicely done. I've been following your works for a while now and you guys are just amazing. Really. This specific work you do and the way you present it in these videos, it is just incredible. Just a big THANK YOU to you guys, that you do this awesome work. I am grateful for that!

Lots of cool video shots in this one, great video as always!

@ThatWorks

2 жыл бұрын

Thanks Felix. We tried a bunch of new stuff and will continue to do so!

the handle looked WAY cooler with the machine tooling marks left on it, smooth up where its held of course but it really did look better with all that minute detailing on it

@ThatWorks

2 жыл бұрын

I agree. I almost left it as is. I just didnt want people to think I half assed it.

You guys are absolutely Masters of your craft.

@ThatWorks

2 жыл бұрын

We are slowly getting there :D Thank you!

Awesome, I haven't even finished the video, but very pleased that the slots were punched like that I was worried the slots were gonna be cut in with a cnc or plasma something like that. I like to see as much forging and hot cutting for whatever reason I just like to see those techniques way more than just utilizing technology!!

That works team are so true to their work,passion and the artwork itself and share lot of knowledge about the build. It great to see both matt and ileya(extremely talented duo) keep doing what you do the best.

Congrats on y’all’s first Marvel build! Looking forward to the next one. When Black Knight eventually comes out, y’all gotta tackle that one!

@ThatWorks

2 жыл бұрын

That might not be a bad idea.

@jacksonsabre4606

Жыл бұрын

@@ThatWorks or even the Necrosword from Thor: Love and Thunder

*Gotta ❤ Ilya's craftsmanship & dedication.*

@ThatWorks

2 жыл бұрын

He is truly good at what he does

Amazing work! It's so cool to see you guys take on challenges like this.

If anyone was wondering, all of those divots and cut outs are to make the sword lighter while still maintaining stability. Also to make it look cool.

This is unlisted, yet I somehow found it by checking your channel page? Great build.

@ZekeAxel

2 жыл бұрын

@National Socialism I saw a different video and thought of That Works, as I went to check the channel, this was top of the playlist.

@ZeroSeriesMMX

2 жыл бұрын

The bell icon would be your best friend regarding that, my friend.

@ZekeAxel

2 жыл бұрын

@@ZeroSeriesMMX For literally finding it before it was public? No bell does that

@ThatWorks

2 жыл бұрын

sneaky !

Absolutely gorgeous build. Cannot wait for the next!

@ThatWorks

2 жыл бұрын

Thank you illmac!

@DivyanshusCreation

2 жыл бұрын

I have a retractable one,you may like it, please check ☺️

Some of the machine marks left on the hilt looked great, they looked like printed circuits and added an extra high tech appearance.

Fantastic build!!!! Well worth the wait!!!!

@ThatWorks

2 жыл бұрын

Thank you Suz!

16:36 I said the same thing. If the sword was retractable it wouldn’t made any sense of Clint carrying it like that. I think it was a dumb idea for the Hawkeye show to retract so the swordsman could be able to steal it.

@andrewli6606

2 жыл бұрын

I commented on a YT video that I thought it being made retractable was kind of stupid, and a bunch of people flamed me, saying I shouldn't question fiction. I pointed out that it didn't retract in Endgame as well. Now I don't think that makes the entire show bad; I think it's the best D+ Marvel show imo. How can we praise Iron Man's intricate and well designed armors if we can't point out and criticize this dumb feature of the sword?

@ThatWorks

2 жыл бұрын

@@andrewli6606 Yea...I see your point. It's all good to me. Just doesnt seem to have been planned out to retract at first.

Every time there's a titanium build, I can mentally picture some grinding belt salesman greedily rubbing his hands together with a big grin on his face.

Love these guys man. Every episode is a treat. Commenting to support that algorithm!

Finally i have been waiting the fire forge to be Lit, and the sound of you hammer and grinder on work

You guys have been massively inspiring to me! I'm 31 and seriously considering changing careers from barber to blacksmith. There is a very high regarded college and course in my area and I'm thinking about enrolling, cutting hair in my downtime to keep myself financially secure and eventually transitioning to full time blacksmith when my skills are where they need to be and the work starts coming my way! Do you guys think I should do it?

@ThatWorks

2 жыл бұрын

I would certainly start as a hobby and see where it takes you. It’s one hell of an investment to make before knowing if you are any good at it…

@nerdwithahammer8751

2 жыл бұрын

@@ThatWorks very fair comment. The plan is to learn while still working as a barber and see where I'm at a few years down the line

@MissionSilo

Жыл бұрын

If I remember correctly barbers also used to be blacksmiths and dentists. Also veterinarians. Stick with being a barber then add to it as you go along

I absolutely loved this build. I was kinda expecting to see a "Ronin/Clint Barton signature on the tang. The end stunts and scenes were the best

@DivyanshusCreation

2 жыл бұрын

I have a same surprise but with a twist in my chanel, please check ☺️

Great job on the sword guys! Very impressive to say the least!!

100% i will be turning an old band saw into a bench filer..... that is the coolest custom tool idea i have seen in i dont even know how long! you guys are awesome

@ThatWorks

2 жыл бұрын

There are butterfly filers available out there. I do understand the drive to want to make your own though. Ive had the same feeling of making a hand sanding assistant.

I was taught in my practical training during my university time as mechanical engineer, that you only tap one side of 2 parts you want to connect via screws. the other side from which you screw it in, is just a through hole of the appropriate size of the screw. Dont think it makes much of a diffference in your build, but you might save some time while taping.

@ThatWorks

2 жыл бұрын

in some cases that may be true but in this one I had to have screws coming from both sides to create the right look.

@No_Way_NO_WAY

2 жыл бұрын

@@ThatWorks makes sense. thx for the reply.

@copitzkymichael3313

2 жыл бұрын

It seems fortuitous that I've seen this post

Every blade you are making is a piece of art. I want to request Ichigo's bankai blade from bleach since the last arc is coming in October this year.

@ThatWorks

2 жыл бұрын

It is time we do something from bleach

@brettkoran5532

2 жыл бұрын

I second the request for a sword from Bleach! Just please not Nozarashi (Kenpachi's blade)- I would be sad to see you guys put in the work to make a katana just to bludgeon it against a lot of stuff to make it authentic to the character (even tho Kenny himself is awesome) lol

This music makes me feel like I’m in the middle of an Ocean’s 11, 12,13 heist… or my team is in the finals and we’re overcoming a Goliath contender in a tearfully heartwarming manner…. learning life lessons along the way.

That is just amazing work! Titanium is difficult to work with, but you guys sure made it look easy.

OK, first comment from me. I love the very first showing of titanium, where it is visually explained why no-one actually makes swords or knives out of titanium. F-ing brilliant. Also, someone was incredibly concerned about mass to make cut outs in a titanium blade. It's much bulkier than a sword should be, but I'd wager it's still lighter. Background on Aluminium Oxide, aka Aluminum Oxide. It IS very hard and durable. Anyone with Al frame windows can probably attest though, that a thin coloured coating is no where near indestructable. Much more resilient than plain Al though. But, doped version (aka Al Oxide with impurities of various types) have common names as crystals, like ruby, emerald etc. Now, the real challenge is "forging" Tungsten. :)

@ThatWorks

2 жыл бұрын

Ive thought about it....There are ways, but why.

@dogmaticpyrrhonist543

2 жыл бұрын

@@ThatWorks yeah, it would be pretty awful. It would snap at the first sign of any impact. And, at three times heavier than iron, it would be horrible to use. At best, a joke weapon. At worst, a self imposed death sentence.

@andrewspencer7804

2 жыл бұрын

@@ThatWorks I wonder if tungsten might be useful as the head of a striking weapon rather than a blade? That concentrated mass would work in its favour..?

@AndreiH1605

2 жыл бұрын

​@@andrewspencer7804 tungsten steel war hammer FTW

@UncleAntiClaws

2 жыл бұрын

Macuatl or Aztec machete... What is the highest technology varient you can make using the best material for each part? Why would monosteel weapons even work in today's world? I do believe something like exchangeable blades is better. I actually head an ancient martial arts organization and there were ideas like these going bach to turn of 19tg century in Asia and Europe. Pirates may have mastered special weapons. Design and it's funny that my org has connections to both European and Asian piracy going back. Most pirates and Viking type people began as fisherman and farmers forced to pay superior warlords demanding tribute. Survival shaped them into something stronger by necessity.

the new intro was pretty sick! How much does 1kg of Titanium bar actually cost? Loved all the little Marvel stuff as well

@TheKiltedYaksman1

2 жыл бұрын

$325 on Ebay.

@ThatWorks

2 жыл бұрын

I got it for $150

Awesome build and video! Thanks for sharing!

I just finished the previous video and this popped up, a blessing

@ThatWorks

2 жыл бұрын

What timing !

This is amazing! Any idea what the final weight on the sword is? It has to be remarkably light, I would think.

@MrZetor

2 жыл бұрын

@Mike Mann It sure as F was light after @27:28!

@mrkiky

2 жыл бұрын

Well considering it has a jumbo aluminum handle, it's probably not overly light. Aluminum may be light compared to steel, but compared to usual handle materials like wood, it's heavy.

The amount of skill that went into this build, both old and new school, is impressive. Good job!

@ThatWorks

2 жыл бұрын

Thank you! It took the whole team!

@Vibranium_man

2 жыл бұрын

@@ThatWorks this might be difficult but can you make a captain america shield based on the falcon and the winter soldier show made of titanium?

@ThatWorks

2 жыл бұрын

@@Vibranium_man ehhh. So many people have done it. Maybe though.

Beautiful work Guys!!

Absolutely stunning work! Truly inspiring

@ThatWorks

2 жыл бұрын

Thank you Narciso!

Great work! Quick question, did you have to heat treat the titanium blade in the same way you would for a steal blade? Or does titanium not need heat treating?

@DopetheWind

2 жыл бұрын

Titanium is often "aged". Sort of similar to quenching steel, titanium is heat soaked in a furnace for a precisely determined amount of time (referred to as "in solution"), then quenched in a prescribed fluid. Immediately after quench, the part is "aged" by maintaining temperature for extended periods of time (2-24hrs) at a lower, but still very high temperature, then left to cool as slow as possible. Also unlike steel, the times, and temps of each process varies drastically based on alloy.

@ThatWorks

2 жыл бұрын

@@DopetheWind yea what he said

@jeffforbess6802

Жыл бұрын

How was it weighted? It looked a little cumbersome in the hand, with that large handle. Do the two metals interact? Does titanium oxidize?

Rad! Did this feel any different as a finished product compared to a comparable(ish?) sword given the different materials used?

@ThatWorks

2 жыл бұрын

It was lighter. Thats about it.

Another great video. That looked super tricky too but, came out freakin epic

@ThatWorks

2 жыл бұрын

Thanks brother!

The “Slot Shaming” comment earned my 👍🏻

Ah... did the sword break? During the testing phase, when Matt gets the sword the second time, starting at 27:25 to about 27:30. He swings at some water bottles, and it looks like you can see the blade if you pause it before the strike. But in the follow-through, it looks like there is no blade. In fact, it looks like the tsuba is gone too. Like the tang snapped in the hilt and everything above his hands went flying.

@ThatWorks

2 жыл бұрын

Nah it just retracted.

@szombatimarcell9961

2 жыл бұрын

Yeah I rewatched it like 5 times to make sure.

@DivyanshusCreation

2 жыл бұрын

@@ThatWorks retractable!!!? yes it's possible 😁 Check my one 😉

I would love to see a showdown on Forged in Fire where one of y'all goes head to head with Ben Abbot over forging this sword with the parameters you had to follow. (Although being able to machine shop the handle would likely be not possible).

@Olordrin

2 жыл бұрын

Closest you'll probably get is that Ilya was on an episode of Forged in Fire, back a few years.

I think that man at arms subscribers are still not aware of this chanel...you guys deserve more than 1M subs..

LOVE the Marvel/That Works opening

@ThatWorks

2 жыл бұрын

Yea I thought that was a fun touch!

Great looking blade I only have one question about the handle it was pretty blocked how comfortable was it to weld

@ThatWorks

2 жыл бұрын

It wasn't incredibly comfortable when you hit things. Not really because of it's shape but because its solid metal. No give.

Nice job, always interesting to see you work with titanium. Looking forward to something from Elden ring.

@ThatWorks

2 жыл бұрын

That game is over the top! Like all the cool weapons smashed into one game.

Matt's grind work is out of this woooorld. Damn thats beautiful work

You definitely made the right choice with making it one solid piece rather then retractable. Also this weapon is an amazing feat of technical skill, you guys are the best! Is there nothing you can’t do?

27:28 did you actually make it retractable 😆. Nice work guys!

@DivyanshusCreation

2 жыл бұрын

I have 😉, please check ☺️

This actually looks better than the one in the show! Great job guys!

@ThatWorks

2 жыл бұрын

A couple of people told us that when they saw it in person. TY!

Awesome video! As much educational than fun to watch!

You guys make it look so effortless, even though it's far from that.

Amazing work! For your next build, could you guys do any big sword from Elden Ring please? That would be very nice!

@ThatWorks

2 жыл бұрын

That game is beautiful isnt it.

Man I think Clint Barton himself would be very proud of this. Job well done and it looks so freaking badass

@ThatWorks

2 жыл бұрын

Thanks Kurgl !

Yunno watching what you guys are capable of making got me wondering, would it be possible to make a fully functional replica of Jetstream Sam's sword?

Cool that you guys are getting some big name builds with the budget, really cool to do a Ti build. Nice fantasy build, but I don't think anyone would make a sword or knife from Ti except for sentimental reasons, far as I understand it it's much more brittle than steel, so it would most likely shattered in the first, proper sword fight - was expecting you guys to comment on/to this at the end. Would have been curious to see Ilya try it with the rolled up matts :-D

@ThatWorks

2 жыл бұрын

Because this is pure Titanium it didn't hold the best edge. I wasn't worried about it breaking or being brittle. The tang is super chunky.

How about a Star Wars build? Like the gaffdi stick the Tusken use?

@ThatWorks

2 жыл бұрын

It is possible!

@isaackim7675

2 жыл бұрын

@@ThatWorks thankfully there’s now a reference on how to make it

@ThatWorks

2 жыл бұрын

@@isaackim7675 that is indeed true

Awesome great Sword working

@ThatWorks

2 жыл бұрын

Thank you Peter!

The best work on titanium I've seen consisted with a higher tech mod of lost wax method and an acid dip that was some kind of enzyme process. More complicated than just acid for refining details. It replaced using any hand tools altogether. Looked finished but then there was some kind of coating like an electroplating technique using powders... I'm not quite sure. It seemed like alien technology to me. Beautiful work. Can't find now but if I ever do I will add.

Great work on this sword. You guys should make Hiemdal's sword at some point

@ThatWorks

2 жыл бұрын

We are actually friends with the guys that made the one for the movie. That's why we have stayed away from it.

@pegcitykid

2 жыл бұрын

@@ThatWorks that’s fair. And a shame lol

27:27 the sword was broken i saw it

@ThatWorks

2 жыл бұрын

Just retracted !

@AcridMonkeysphere

2 жыл бұрын

@@ThatWorks 🤣 Legendary reply, love watching you guys work. Great vid

Overall it looks pretty cool. IIya does some great work. The slots could still be cleaned up more though with a file though. It looks like it was given up on and unfinished because it's a pain. Even if you had it sent out to be machined out like the handle, it would tie it together better I think.

that reciprocating file is genius

well done again , fellas love the work

@ThatWorks

2 жыл бұрын

THank you AK

Those sparks are so satisfying.

@ThatWorks

2 жыл бұрын

I tell you what...While you are working on it...It gets old pretty fast. Like staring into a lightbulb all day.

Back in the day the used stones and spinning stones to grind / sharpen. Do they offer a better finish than sanding belts? Maybe a different way of grinding for titanium is needed? Amazing as always!

Whoooo yeah baby I’ve been waiting for this since the teasers

@ThatWorks

2 жыл бұрын

What did you think?

Those machine marks on the handle looked amazing. If you weren't doing a recreation, they would have enhanced the end design.

@ThatWorks

2 жыл бұрын

That's exactly how we felt about it. We will have to do another one that is of our own design.

The machine finish from the CNC would give a great cybernetic finish.

if there ever was any doubt that Ilya is the best, this sword wouldn't have worked for many masters out there, exceptional skills, you make the impossible look easy,.

@ThatWorks

2 жыл бұрын

He often does doesn't he.

A blooper reel at the end? You spoil us xD more of this pls

@ThatWorks

2 жыл бұрын

check out this channel for more content like that kzread.info

that mounted file setup is genius

@ThatWorks

2 жыл бұрын

yea its quite handy

This is awesome good work man 👏👏👏👍👍👍👍

Very cool! Can't wait to see how the Titanium works.

@BeardedDanishViking

2 жыл бұрын

Not well. They made Blade's sword some years ago, and Ilya explained why titanium is a subpar sword material.

@OG1

2 жыл бұрын

@@BeardedDanishViking Thank you. I have seen Ti dive knives online but this my first time seeing a sword ever.

@ThatWorks

2 жыл бұрын

There are alloys that do a decent job but pure doesnt hold the best edge for cutting/slicing.

@jameswhatsit

2 жыл бұрын

Can you make a steel edged/titanium spined sword, or do the materials not weld?

@ThatWorks

2 жыл бұрын

@@jameswhatsit there are ways. Possibly even with a mechanical bond not a weld

Awesome video! Cheers!

That’s awesome. It’s what I was waiting for was the fun at the end. What’s the sense in making something cool if you can’t play with it. Good for y’all

@ThatWorks

2 жыл бұрын

Thanks! Yea we had some extra fun filming the demo this time. More of a story.

I'm curious: was the slot punch used to put the slots into the blade something you already had, or was it made specifically for this build?

@ThatWorks

2 жыл бұрын

It's one ilya uses for punching guard slots.

from my limited knowledge of what ive heard and read of titanium I cant even imagine the probably insane number of hours it must have taken to file and grind that sword

I think Clint converted it into a retracting blade after he gave up the Ronin name so he could hide the thing easier. After all, he never intended to use it or that Ronin suit ever again. He wouldn't care about potential retained functionality. Until it got stolen, it was probably in a closet somewhere in the Avenger's Compound, likely awaiting someone to destroy it.

The chatter on the cnc mill looked like it was made by this old Tony 🤣

Anodizing aluminum gives you a hexagonal structure of aluminum oxide that builds up on the surface. That aluminum oxide is technically the Anodizing. But it's transparent, so adding the dye fills those hexagonal cells oh, and then the last operation basically closes the hexagons off. Like a tattoo. If you were to anodize the titanium, you rely on a different method called interference light refraction to develop colour. Light that hits the oxide surface first, bouncing some light back at your eye, then what's left of the light hits the actual metal surface and bounces back, and depending on how thick your oxide layer is you can get a rainbow of colours as you match both the oxide and the metallic surface reflected light at certain intervals that we might call red or purple or green or whatever colour

@ThatWorks

2 жыл бұрын

Isnt that exactly what I said ?

Just another day at the office for Ilya... they said challenge, but he's not feeling it at all.

Great Build!

A very great futuristic build! 😃

Wonder if you guys will do more transforming stuff in the future, like you did for Bloodborne.

@ThatWorks

2 жыл бұрын

If there is a realistic reason to do so, then we will

Cool build. At 27:29, did the bolts holding the blade into the handle break?

Awesome! Good job!