No video

Can I Lift a Load With My Pulling Winch? - FAQs

Watch this video to learn if we recommend that you lift or lower a load with a Dutton-Lainson pulling winch.
0:00 Intro
0:09 Don't lift a load with a pulling winch
1:28 Outro
Dutton-Lainson pulling winches can be purchased here: www.dutton-lai...
Check out our channel to watch additional videos about DL and our products: / duttonlainson
Subscribe to our channel to get all of our videos in your feed: www.youtube.com...
See more questions answered in our FAQs Playlist: • FAQs
Thanks for watching!
*Music- "The Creek" by Topher Mohr and Alex Elena
Here is the transcript of this video:
"People often ask us if they can vertically lift a load with a Dutton-Lainson pulling winch, but the answer is right there in the name.
While many call non-brake hand operated winches intended for pulling applications hand, manual, or ratchet winches, we call them pulling winches to emphasize that we do not recommend using them in vertical lifting applications.
While it is possible for these winches to lift a load and hold it in place when you let go of the handle, you're leaving it and the winch in a very precarious position. If there is a load on the pulling winch and you lose control of the handle when the ratchet pawl is disengaged from the drive shaft gears, the handle will violently spin and your load will freefall to the ground, which could seriously damage you, your load, and the people around you.
Because of the potential dangers, a pulling winch should never be used to vertically lift or lower a load. Instead, you should use a winch with an automatic brake built into it, such as a brake winch, a worm gear winch, or an electric winch without a clutch lever. There aren't any levers to mess with on these types of winches, and they are designed with vertical lifting applications in mind.
Thank you for watching this video!
Please visit our KZread channel for more videos about D-L winches, and contact us to let us know what video we should do next!

Пікірлер: 33

  • @woodworkerroyer8497
    @woodworkerroyer8497Ай бұрын

    Thank you! This answers my question, and isn't just an ad for your products (no offense intended, I just need to know what winch I need for lifting, and you answered that perfectly without just telling me about a product. Though they do look good!)

  • @rrw65
    @rrw652 жыл бұрын

    Dang. Been using the wrong type wench for hoisting deer to skin, for 45 years! Lol

  • @lordjaashin

    @lordjaashin

    2 жыл бұрын

    lol dang 45 years?!

  • @NoferTrunions
    @NoferTrunions2 ай бұрын

    If they are unsafe to lift, they are only safe to pull on level ground - and unsafe to pull vehicle out of a ditch or up the side of a ravine.

  • @KarasCyborg
    @KarasCyborg2 ай бұрын

    ...automatic brake or worm gear won't help you one bit if the cable breaks.

  • @therosses5
    @therosses5 Жыл бұрын

    Another dream shattered...it's a good thing.

  • @woodworkerroyer8497

    @woodworkerroyer8497

    Ай бұрын

    Better your dreams than your head LOL

  • @therosses5

    @therosses5

    Ай бұрын

    @@woodworkerroyer8497 hahaha so true!!

  • @bradd5961
    @bradd59616 ай бұрын

    How did you mount it to the pole?

  • @KielSkaggs
    @KielSkaggs Жыл бұрын

    Thanks for the video. I need a winch for a simple tilt welding table and got a two way one thinking it was right. I think I need a break winch. I believe they are the same ones used on construction lights that you can pull behind a truck.

  • @user-ss8tz5ky6l
    @user-ss8tz5ky6l2 жыл бұрын

    عندي نفسها أيضا يدوية ترفع لكن ماتنزل ما هو الحل وكيف إصلاحها

  • @awominaga3276
    @awominaga32763 жыл бұрын

    Make different types of winch video

  • @benfletcher9659
    @benfletcher96599 ай бұрын

    Hello what type of winch would you recommend for pulling a trailer up and lowering down a steepish driveway? Thanks

  • @DuttonLainson

    @DuttonLainson

    9 ай бұрын

    Thanks for your question! Many people would use a pulling winch in that scenario. One of our models with a hand brake (such as the DL2000AB- www.dutton-lainson.com/proddetail.php?prod=14730) is designed for applications like you described. However, you could also use a brake winch if you wanted the additional safety factor of the automatic friction brake in that type of winch.

  • @gschady
    @gschady Жыл бұрын

    I had an accident this way and died

  • @JuiceBanger1
    @JuiceBanger14 жыл бұрын

    Interesting

  • @matthewe4024

    @matthewe4024

    4 жыл бұрын

    Indeed

  • @61riaz
    @61riaz3 жыл бұрын

    Where I can buy this winch in Dubai

  • @dariusharrod6305
    @dariusharrod63053 жыл бұрын

    Hi, I just wanted clarification on what your chain drive break winches are meant for?

  • @DuttonLainson

    @DuttonLainson

    3 жыл бұрын

    Thanks for your question, Darius! Our chain drive brake winches are intended to be used on boat lifts and operated with a large boat lift wheel instead of a handle.

  • @EricSmith-mn5om

    @EricSmith-mn5om

    3 жыл бұрын

    There is a small brake winch for lifting

  • @truhunk1
    @truhunk14 жыл бұрын

    Ok, so you can use an electric winch as a hoist ?

  • @woodworkerroyer8497

    @woodworkerroyer8497

    Ай бұрын

    They said so. Just as long as it has an auto brake without the lever thing.

  • @EmiAgriDiY
    @EmiAgriDiY Жыл бұрын

    Great job 👍👍👍

  • @boomstickkid
    @boomstickkid Жыл бұрын

    Is a brake winch or a worm gear better for lifting? I fear a brake winch has more parts that could fail.

  • @DuttonLainson

    @DuttonLainson

    Жыл бұрын

    Thanks for your question! Both D-L brake and worm gear winches are suitable for lifting applications, and there are pros and cons to using either type. We offer a much wider variety of weight capacities in our brake winch lines and they offer a much faster operation than worm gear winches, but they require a minimum load to function properly. Worm gear winches do not require an minimum load to function properly, but they are much slower to operate than brake winches and are only available in two weight capacities.

  • @boomstickkid

    @boomstickkid

    Жыл бұрын

    @@DuttonLainson i just purchased 3 of your worm gear winches with the hex drive for my jack system to lift my truck camper on and off my truck. the previous jacks had regular pulling winches which looks like a disaster waiting to happen. i almost went cheap and bought china winches but i like supporting USA manufacturing.

  • @fabianmontoya4851
    @fabianmontoya48514 жыл бұрын

    Cuánto es el peso que puede subir

  • @stephenrobbins7632
    @stephenrobbins76323 жыл бұрын

    Is there a bracket available that enables me to secure a manual winch to a scaffold pole?

  • @DuttonLainson

    @DuttonLainson

    3 жыл бұрын

    Thanks for your question! The only mounting bracket we offer that might work in this application is the 6565 universal mounting bracket. You can learn more about it here- www.dutton-lainson.com/proddetail.php?prod=24110

  • @stephenrobbins7632

    @stephenrobbins7632

    3 жыл бұрын

    @@DuttonLainson Thanks for taking the time to reply, this would be perfect for what I want. Can you tell me the dimensions for the hole centres please?

  • @DuttonLainson

    @DuttonLainson

    3 жыл бұрын

    @@stephenrobbins7632 All of the dimensions for the 6565 bracket are listed in its dimensional drawing, which can be viewed on our website here: www.dutton-lainson.com/assets/pdf/drawings/DD_6565.pdf

  • @afzalblhmntaknolwaaja8488

    @afzalblhmntaknolwaaja8488

    3 жыл бұрын

    Bolh d pesan