You guys have the best videos!

@wKKnDwarriors

Жыл бұрын

Thanks Tony! Appreciate you taking the time to post a comment 🤗

You have to be kidding me!! This has to be one of the best videos I have ever seen on KZread. The detail. Great. Thank You so much!!!

@wKKnDwarriors

Жыл бұрын

Hi 👋 Thank You!! Glad our video was able reach you and help in anyway 🤗

I love the detail and the explanations you guys put into your videos. It is appreciated. Keep up the good work! I also have a jet boat and a CanAm w toy hauler. We're in Havasu all the time. We are also getting ready for off-roading season. All the local places (ie..0El Mirage) and multiple trips to Glamis. Hope to see you guys out there one day.

@wKKnDwarriors

2 жыл бұрын

Thanks for tuning in and providing us with your feedback! We appreciate it and if you do see us, feel free to wave/flag us down 🤗

thank you for the detailed video and narration it helps!

@wKKnDwarriors

9 ай бұрын

Thank you! Appreciate the support! Glad we were able to help

This video is the best by far. Thank yall so much. Helps a lot.

@wKKnDwarriors

2 ай бұрын

Thats great to hear! Thanks for your input and feedback! 😁

great video ! Thank you both I'm about to inspect mine today after a huge 5 days in Glamis. I already ordered my Rollers.

@wKKnDwarriors

2 жыл бұрын

Thanks! Wow you must of had a great trip!

Thank you so much for this tutorial - it helps us a lot ☺️☺️☺️ greetings from Germany 😇

@wKKnDwarriors

2 жыл бұрын

Awesome! Glad this helps for you. 🤗 Thanks for tuning in!

Thanks good video!

@wKKnDwarriors

Жыл бұрын

Thank you! Appreciate the feedback 🤗

I just did my secondary rollers on my X3 and fully disassembled the clutch . Was a massive pain . I was wondering why it needed to be completely disassembled. Doing one at a time i suppose each pin keeps the helix from unclocking . A 4mm skinny neck socket works perfect for tapping the pin back in for roller reinstallation . I went with Cubic Dollar OffRoad Rollers.

@wKKnDwarriors

8 ай бұрын

Oh man, well glad to know youre all fixed and back to shredding 🤙 Thats what really matters 😁

Thank you... Before you changed the rollers, what was were the signs or issues?

@wKKnDwarriors

6 ай бұрын

Hi, welcome to the channel. Before the roller replacement it made a pretty loud rattle noise, and the drive felt like it was stuck and we had to gas a bit more.

That rear tire carrier is very cool! Nice and low, I love it! Your other video showed some nice clean wiring, nice work! You should do a walk around video of the X3. I’m curious about the huge Intercooler, the rack and pinion, etc…

@wKKnDwarriors

2 жыл бұрын

Thanks! Well definitely work on adding more videos to the X3 playlist of our channel. Thanks for tuning in!

Hi when you put the new rollers in, as you are not disassembling, should these rollers need to spin freely or because these are still under pressure they don't spin?

@wKKnDwarriors

Жыл бұрын

Hi correct its always under tension will not spin freely

I saw a video that disassemble the entire clutch, is that necessary?

@wKKnDwarriors

Жыл бұрын

Hi we did not diassemble and was able to replace them with no issues.

How did you get the rollers in mine wont go in might have order wrong ones?

@wKKnDwarriors

9 ай бұрын

Hi we had to buy the tool for it. But there are comments in this thread where someone was able to work around it.

How have the rollers been performing ?

@wKKnDwarriors

2 жыл бұрын

Hi 👋 they've been pretty solid, no issues 👌

Does anyone know why my belt doesn’t want to get tighten after I replaced it? Could it be my primary or secondary clutch? Any ideas? I even out the original belt and it still not tightening

@wKKnDwarriors

9 ай бұрын

Hmmm...may be best to take it apart and reinspect everything. Maybe a washer sliped out

Did you get a check engine light?

@wKKnDwarriors

2 жыл бұрын

I dont think we did. We only knew it was broken from all the noises.

What you torque to?

@wKKnDwarriors

Жыл бұрын

Hi we torqued it with 56ft lbs

Do you have this special tool for sale?

@wKKnDwarriors

Жыл бұрын

Hi the tools can be found on amazon Can Am X3 Maverick Sport Defender G-Boost Clutch Rhino Roller Kit amzn.to/3m1njdf Dcp26 Can Am X3 Clutch Roller Pin Extractor Removal Tool amzn.to/3Ne3FqA

Why did you have to replace the rollers

@wKKnDwarriors

2 жыл бұрын

Hi they were broken to pieces. Clutch was no engaging.

Salut tu a un claquement au démarrage à la fin de ta vidéo tu sais d’où ça vient ? Je te remercie car ça me le fait aussi à chaque démarrage et j’arrive pas à s’avoir pourquoi

@wKKnDwarriors

7 ай бұрын

Hi yes we think its from the primary. We think it may be the weights rattling. Hope this helps.

@antoinericci4499

7 ай бұрын

@@wKKnDwarriors je te remercie j’ai trouvé d’où ça claque tu doit avoir le même problème que moi

@wKKnDwarriors

7 ай бұрын

Awesome, great news @@antoinericci4499

Did the rollers come with new washers

@wKKnDwarriors

2 жыл бұрын

Hi, it did not come with new washers. We used the same ones.

Didnt need the $100 tool,just 2 c-clamps and basic hand tools.#outdoorboys205youtube

@wKKnDwarriors

Жыл бұрын

Cool thanks for the update. Glad you were able to find a way around it 🤗

@Gorealaracer38

Жыл бұрын

@@wKKnDwarriors thank u! All info is good info imo.#outdoorboys205youtube

@wKKnDwarriors

Жыл бұрын

@@Gorealaracer38 Agreed! Appreciate you sharing your updates. Will help a lot of peepz out 🤗

When you drive was it making lots of ugly noises

@wKKnDwarriors

2 жыл бұрын

Hi, yes it did. It sounded like grinding noises.

@mru5170

2 жыл бұрын

Dang i have just a basic maverick sport 2019 and it’s grinding and I took cover off and noticed my secondary is open putting no tension on the belt

@wKKnDwarriors

2 жыл бұрын

@@mru5170 Yeah similar to ours. No tension and it was stuck

@Gorealaracer38

Жыл бұрын

@@mru5170 im about to change mine too,SAME RIG 19 ms 'base' model 1100 miles on it.#outdoorboys205youtube

@Gorealaracer38

Жыл бұрын

@@wKKnDwarriors is the clutch tool ABSOLUTELY necessary? I dont wanna spend the $100 4 the tool if theres another way,rollers were only $60 lol.#outdoorboys205youtube