Can Am X3 Limp Mode/ What Happen? /How I fixed Limp Mode Issue

Автокөліктер мен көлік құралдары

In this video i will share the error code and also discussed what i experienced during limp mode.
Fault Code: P0301,P0302,P0303
Also, please subscribe to support the channel. We are trying to come out with a video once a month.

Пікірлер: 65

  • @socallawdog
    @socallawdog2 жыл бұрын

    Great Advice. Was in baja my limp home mode came on and changed my belt and ran great for 200 miles.

  • @sxs_krew9443

    @sxs_krew9443

    2 жыл бұрын

    Awesome. I hear Baja has some great riding spots. That’s on the bucket list.

  • @joseluismeza8312
    @joseluismeza83122 жыл бұрын

    Having same issue. Only had it for 2 months and when I go past 50mph it goes into limp mode which is very frustrating considering these are very $$ and over all practically new. Great video. Very helpful

  • @sxs_krew9443

    @sxs_krew9443

    2 жыл бұрын

    Thank you for the positive feedback. Let me know what fixes your car. Try switching the belt and see if that helps.

  • @adamjurrens1897
    @adamjurrens1897Ай бұрын

    My 2020 Can am Maverick X3 with 1300 miles and the oil light came on and she sputtered a little and went limp under like 15mph. ( Full with 91 Octane/seafoam ) I changed oil and air filter and it idled perfect. Then went up the road and the engine light came on and limped back. I am waiting for that clutch piece so I can change the belt. I do want to try this before taking it in. I hope she works !! Like the video and subscribed. I'll put my feedback on here once I change that belt.

  • @raekwonwillis102
    @raekwonwillis102 Жыл бұрын

    The belt issue is separate from the limp home mode. The only time you see that is if the ecm detects a misfire. Any time we see this issue it’s typically caused by either poor fuel octane, or driving the machine hard while it’s still cold. If you shut the machine off and let the gauge power down, the machine will come out of limp home mode.

  • @sxs_krew9443

    @sxs_krew9443

    Жыл бұрын

    That’s strange because ever since I swapped the belt, the limp mode never came back. It happen to me twice with the same belt and once the dealer swapped it, it never came back. Interesting.

  • @Beast556g
    @Beast556g Жыл бұрын

    did it have a flashing check engine light?

  • @dirtworxphotography245
    @dirtworxphotography2452 жыл бұрын

    I have a 2017 stage 5 on e85. Drove it to work running fine. On lunch break i got on it a little and it back fired. Ran fine after that. Then got off work and jus casually driving jus nothing 35mph and check engine. Shut it off for 15min looked it over and away i went with all power back and no check engine. Could mine be the plugs?

  • @sxs_krew9443

    @sxs_krew9443

    2 жыл бұрын

    That’s tough as you have a tune. Depending where you got the tune from they probably could read the logs and pin point the problem.

  • @StraightBassin
    @StraightBassin3 жыл бұрын

    I had the same problem with my car...they changed the belt and updated ECU. Ran good for about 25 miles and then LIMP MODE again....with code P0302. Any suggestions?

  • @sxs_krew9443

    @sxs_krew9443

    3 жыл бұрын

    Really? You changed out the belt with a brand new belt? My car has not gone into limp mode after we replaced the belt. I have heard that some people had to re-flash their ECU on 2021 models. what year and model do you own?

  • @chrislopez7006

    @chrislopez7006

    3 жыл бұрын

    @@sxs_krew9443 I have the same exact problem and I have a canam xrs 2021

  • @sxs_krew9443

    @sxs_krew9443

    3 жыл бұрын

    @@chrislopez7006 so my car went into limp mode the other day because an intake hose came loose. Double check the intake hoses. I’m sure you already changed the belt. On my buddies 2021 he had to reflash the ECU. Luckily it happened as soon as we were trying to load it into the trailer at the dealer.

  • @304trails8
    @304trails8 Жыл бұрын

    Anyone know why an x3 would overheat idling then cool back to normal when moving but overheats as soon as I slow to a stop. Road most the day like this just kept an eye on the temp. But at the end of the ride it pegged out went into limp mode started to smell coolant so tried to limp it back but suddenly smelled burnt oil so I shut it off pulled the dip stick and it was smoking with no ooo showing hardly on it. Developed a tick so towed back in neutral engine off. Now trying to figure out what might need fixed.

  • @sxs_krew9443

    @sxs_krew9443

    10 ай бұрын

    Wow! I don’t know to be honest. Have you checked the coolant level and the oil level? Is your car eating oil?

  • @304trails8

    @304trails8

    10 ай бұрын

    forgot about even asking in these comments about haha. ended up having to get a new motor put in. don't know exactly what happened to it but my guess was a and thermostat which caused it to get hot enough to melt the water pump which then just grenades the motor.@@sxs_krew9443

  • @PHXmove
    @PHXmove3 жыл бұрын

    I just got a brand new can am x3 turbo rr not even 50 miles & it started doing this !!!

  • @austynaubry299

    @austynaubry299

    3 жыл бұрын

    Having the same problem. Just bought mine from RideNow. Any luck with yours?

  • @franciscocontreras39

    @franciscocontreras39

    3 жыл бұрын

    Having the same problem

  • @PHXmove

    @PHXmove

    3 жыл бұрын

    @@franciscocontreras39 I just took it back & they changed my belt & its been working good now im sure you’re frustrated but just get on they ass good luck !

  • @PHXmove

    @PHXmove

    3 жыл бұрын

    @@austynaubry299 Yea finally I had to get the managers involved bc its a new unit & they changed my belt & it seems to be running good now dont let them take advantage & wish you the best of luck !

  • @ricardoholguin6342
    @ricardoholguin63422 жыл бұрын

    Hey Tengo 2017can am X3 max D's y El problema ke tiene es cuando ledoy con la llave la performance de primero si seba recio y despues llano kiere dar mas de 30 no tedras idea ke pueda aser

  • @DavidPerez-tk5cp

    @DavidPerez-tk5cp

    Ай бұрын

    Me pasa lo mismo, encontraste la solucion?

  • @EldeLalobo
    @EldeLalobo3 жыл бұрын

    Hola. Tengo el mismo problema , mi x3 es 2020 y tengo la luz del motor prendida y no tiene potencia, será solo la banda?

  • @sxs_krew9443

    @sxs_krew9443

    3 жыл бұрын

    sí, pude ser la banda. cambia la banda , pero no tires la banda original. solo a si podemos ver si es la banda. Dime que pasa.

  • @EldeLalobo

    @EldeLalobo

    3 жыл бұрын

    @@sxs_krew9443 ok mañana la reviso y te digo como salió gracias por el consejo 👍

  • @sxs_krew9443

    @sxs_krew9443

    3 жыл бұрын

    @@EldeLalobo de nada.

  • @ramongamez1757

    @ramongamez1757

    Жыл бұрын

    Si usas gasolina con bajo octane eso sigue pasando usa la de 91 eso paso conmigo

  • @miguelsaldana2334
    @miguelsaldana23342 жыл бұрын

    Hi I have a 2021 can am x3 xrs turbo rr and check engine light came on and the code is p0234 what can it be

  • @sxs_krew9443

    @sxs_krew9443

    2 жыл бұрын

    Dude have you tried to Google the code?

  • @gamaliersantanasierra6666
    @gamaliersantanasierra66663 жыл бұрын

    Tengo un ryker 2021, apenas lo compré el 2 de junio y las tres veces que lo he corrido a terminado en la garantía. Solo marca en el tablero Vss y limp Home mode.

  • @andresneira9745

    @andresneira9745

    2 жыл бұрын

    Solucionaste algo. A que se deve eso

  • @mamayel
    @mamayel3 жыл бұрын

    Hey boss I have the same issue , I checked the oem belt and it seems fine, I can't see anything wrong with it , is there something I need to look for on the belt?

  • @sxs_krew9443

    @sxs_krew9443

    2 жыл бұрын

    Hey bro. Sorry for the delayed response. You know, my belt looked brand new. I swapped mine to the EVO belt and haven’t had a problem since. I doesn’t hurt to try to switch belts, if you don’t feel like switching belts, I would take in the car to the dealer and have them scan it.

  • @jasonweir8147

    @jasonweir8147

    Жыл бұрын

    I'm currently dealing with exact same. I have 2020 1000RR. Was told belt, open cover and belt looks totally fine. My temp sensor was faulting though too. Fixed it and same problem. Going to swap belts. After reading these comments, I'm hopeful that's it. Thank you!

  • @jorgeolivas1714
    @jorgeolivas17143 жыл бұрын

    Same thing with mine, clutch humming and everything. Replaced belt with a Trinity Racing Sandstorm Belt and its still stuck on limp mode, any suggestions? 2019 Can am x3 Xds TurboR

  • @sxs_krew9443

    @sxs_krew9443

    3 жыл бұрын

    The humming is the clutch bearing. You might have to take it to the dealer and get the computer re-flashed.

  • @jorgeolivas1714

    @jorgeolivas1714

    3 жыл бұрын

    @@sxs_krew9443 I'll check it out, thanks!.

  • @albertsanchez759
    @albertsanchez7593 жыл бұрын

    Am getting P0301 and P0303? You think is the belt...

  • @sxs_krew9443

    @sxs_krew9443

    3 жыл бұрын

    Dude -I would definitely try it out. Is the car still running the original belt that came with the car?

  • @albertsanchez759

    @albertsanchez759

    3 жыл бұрын

    @@sxs_krew9443 yeah it has the original belt. But I took a look at it and it looks brand new btw it's a 2020 can am x3 xrc turbo.

  • @sxs_krew9443

    @sxs_krew9443

    3 жыл бұрын

    @@albertsanchez759 I would try it out. Don’t throw away your belt just in case that’s not the issue. Same here, my belt looked brand new as well. Let me know what you find out.

  • @albertsanchez759

    @albertsanchez759

    3 жыл бұрын

    @@sxs_krew9443 alright thx man. Got any good recommendations for a belt?

  • @sxs_krew9443

    @sxs_krew9443

    3 жыл бұрын

    @@albertsanchez759 yeah, I run EVO bad ass belt. They are strong and built for abuse. Check them out. If you buy it from their website make sure to use the promo code in the description for free shipping.

  • @papispaint1719
    @papispaint17193 жыл бұрын

    I have same issue just got it today new from dealer

  • @sxs_krew9443

    @sxs_krew9443

    2 жыл бұрын

    Did you get fix?

  • @denissandoval8244
    @denissandoval82443 жыл бұрын

    Yes I have the same problem I got to 50 milles and check emgene go on and go dow 30 milles

  • @sxs_krew9443

    @sxs_krew9443

    3 жыл бұрын

    Try swapping out the belt.

  • @Alan1michel
    @Alan1michel3 жыл бұрын

    I've seen 2 of your videos, great content, but horrible audio. can barely hard to hear it a full volume. thought I'd leave an honest comment. good content.

  • @sxs_krew9443

    @sxs_krew9443

    3 жыл бұрын

    Thanks for the honest review. Just starting the KZread channel. Working with what I have.

  • @aukevinj
    @aukevinj2 жыл бұрын

    The car? 😂

  • @fabiobonatti
    @fabiobonatti3 жыл бұрын

    I had the problem "LIMP HOME" I have an X3 2019, I speak from Brazil. After taking the car to wash, returning from a trail, I started it in the garage and the warning appeared on the display. After reviewing everything, I saw that the negative pole of the battery was loose, so I pressed it tightly, and the message disappeared. I went for a trail the next day, I walked about 25km, all right .. Then I went to accelerate everything, on a straighter road, and LIMP HOME appeared on the display and cut the accelerator! I disconnected the battery, waited, connected and the message disappeared, then I went to accelerate again (+ - 50-60mhp) and cut the accelerator in half, showing a LIMP HOME message followed by another message "Check your engine" !! I came back from the track with a controlled speed, + - 15-20Mhp, and now I'm going to check every engine, whip, etc.

  • @sxs_krew9443

    @sxs_krew9443

    3 жыл бұрын

    Let’s us know what you find out.

  • @fabiobonatti

    @fabiobonatti

    3 жыл бұрын

    @@sxs_krew9443 kzread.info/dash/bejne/p4aasqiugbHHobw.html

  • @sxs_krew9443

    @sxs_krew9443

    3 жыл бұрын

    @@fabiobonatti so it’s fixed?

  • @fabiobonatti

    @fabiobonatti

    3 жыл бұрын

    @@sxs_krew9443 So, after tightening the poles of the battery, and walking + - 23km of trail, I went to do some accelerations (kzread.info/dash/bejne/p4aasqiugbHHobw.html), and it was in these accelerations that LIMP MODE appeared. again! So I walked the other 23Km back with LIMP Mode activated, walking at a slow speed between 20-40Km / hr .. Then I had the UTV washed, and in the garage I turned it on again and I was no longer giving LIMP HOME .. !!! So I called the mechanic, to do a general overhaul, and he found a thin hose that was loose, that hose was connected to the turbo sensor, maybe with a car wash it released! We did a test by speeding up the street and the LIMP home didn't come back.,. I hope that on the next track it won't show up again!

  • @gustavoalvarez744
    @gustavoalvarez7443 жыл бұрын

    I have the same problem bro fuck

  • @sxs_krew9443

    @sxs_krew9443

    3 жыл бұрын

    Try switching out the belt. Let’s hope that fixes it.

  • @gustavoalvarez744

    @gustavoalvarez744

    3 жыл бұрын

    @@sxs_krew9443 I check the belt it’s in good condition

  • @sxs_krew9443

    @sxs_krew9443

    3 жыл бұрын

    @@gustavoalvarez744 it’s not the condition of the belt. Trust me when I replaced my belt, it looked brand new. Just try it. Doesn’t hurt.

  • @abramguenther9789
    @abramguenther97893 жыл бұрын

    Tengo el mismo problema

  • @sxs_krew9443

    @sxs_krew9443

    3 жыл бұрын

    Qué año y modelo tienes? ¿Has cambiado el cinto?

Келесі