I have a 2017 can am x3 rs with 16400 miles replaced 6 belts both clutches brake master cylinder 1 rear axle upper a arm front sway bar 2 sets of bfg kr2 35s

I have the 2021 x3 turbo r also this is a great informative video. Thank You 👍🏼

Excellent review! Keep em coming!

@WvTrailN

4 жыл бұрын

Thanks!

We came from a commander to an x3! Big change!! I agree, I'm a big guy and getting in and out can be alittle hard!!

@WvTrailN

4 жыл бұрын

Yea that a big power increase from a commander.

The door handles that go on the inside are awesome. You just have to dremel the plastic piece up a little. But they’re the best upgrade I’ve done to mine so far. I couldn’t stand the factory pull straps.

@WvTrailN

4 жыл бұрын

I may be in the market for some soon. I’ll check those out too. Thanks.

These X3’s are a blast for sure.

@WvTrailN

4 жыл бұрын

Super happy with mine so far!

Awesome review.

Does it have a turbo and wat does x3 mean

Really like your channel you ride the trails I ride when I come down my old man live on old coal dale Mountain. I have the same machine looking to jump up to 32’s what’s your wheel combo your running? And what offset are you running on your wheels. Ty!!

@WvTrailN

4 жыл бұрын

Thanks a lot! 30-10-14 carnivores with 5+2 system 3 offroad wheels. I may try some 32’s myself at some point.

Does every x3 have a turbo

4:48 i know for a fact people dont belive in break in periods lol. But i have a little bit of automotive background and seals starting to leack is a result of what many other problems rise when you dont do a proper break in and i repeat almost 75% of people don't believe in break ins but heres the secret, motors and all metal moving parts in a car when they are brand spanking new come with tolerances from the factory meaning from one car to another you might have an eight of a mm diffrence in the piston seals from one car to another and those number can change the thing about break in your giving your brand spanking new parts time to rubb off all the excess tolerences the enginiers put on those messurments therefore your engine can settle down where its going to spend 99.9% of its entire life riding against to.

Around 2800 here. 19 xrs. I busted clutch rollers around 500 miles. It was my fault. Blowed oem belt at 2600. Been a excellent ride for sure.

@WvTrailN

4 жыл бұрын

My Stock rollers are holding so far.

@ytcoleman

4 жыл бұрын

I was learning to jump and did t let off of fuel when landing. Busted the rollers. Not had any issues since.

👍👍👍

I couldnt stand the door straps either, brp door handle kit is amazing

yes add yxz I have a 2016 looking to buy a 2019 would like feed back

Great vid. I'm bout to buy my 1st sxs, a new X3 Max DS base model. Found you from your fan RC 120hp to 195hp upgrade vid, which is great vid too. Made me very confident to put my deposit down and order the base model knowing its gonna rock my newbie world and later if I feel I need I can easily add upgrade kit/tuner. I'm 6'5" 350lbs w a bad hip. At the dealer, woo boy you right, in/out ain't easy. I know right off bat I'm gonna drop front seat mounts to low position and prolly cut tub riser on back of seat mount to lower that also keeping lean back seated feel, but the seat it self is something I'm wondering about changing. Have you tried and/or found better/wider seats to help the get in/out prob? Keep up the great work!

@WvTrailN

3 жыл бұрын

I know a guy around here running some prp seats and they felt amazing compared to the stock seats. I only sat in it for 4-5 minutes but they felt great.

@danobonano1315

2 жыл бұрын

@@WvTrailN is the x3 in this video the 64" ? I live in PA and was planning on getting the 64

@WvTrailN

2 жыл бұрын

64”

Might be in the comments but in addition to the noise reduction kit throw 2021 clutch tubes its may a third of what it was stock rocky mountain has them for like 108 bucks. Have the same year and model

These things like any other things will have issues if you sink it in swamps and mud and Dive Over Hills often They are all terrains vehicles but not unbreakable vehicles

@WvTrailN

3 жыл бұрын

Real happy with how it’s held up so far 👍🏼

System 3 makes a carnivore killer! XT370. Supposed to be better than Carnivores 🤷🏼‍♂️ cheaper too. I’m riding same set up basically. No complaints!

@WvTrailN

4 жыл бұрын

I like the looks of the system 3 xt370. I Would like to try a set.

what was better on the yxz?? what is better on the can am??... i heard the 5k rpm RATTLE is HORRIDD ! is that true? IF YOU WAS STARTING OVER AGAIN, KNOWING WHAT YOU KNOW NOW, WHAT WOULD YOU BUY?? and lastly have you tried a talon? thanks guys

@WvTrailN

Жыл бұрын

Honestly the yxz is built great. 3k miles and hardly any rattles or problems. The shifting is fun also. The x3 is a beast of a machine and also built pretty well. The 5k rattle is awful tho. Overall I’d give the nod to the x3. Haven’t tries a talon yet

Did you remove the mud scrapers off or leave’em on when you ran the oem wheels and tires? Also do you ever have any trouble w rocks getting stuck in the aftermarket rims?

@WvTrailN

3 жыл бұрын

I removed them and haven’t had any problems.

@tbro247

3 жыл бұрын

Thanks buddy!

@WvTrailN

3 жыл бұрын

No problem

When you ran them system 3 sb4 wheels did you ever rub at all?? Im looking at getting them same wheels but with a 32x10r15. Think I'd be okay? I have an identical machine, it's just a 2020 RR. Thanks!!

@WvTrailN

3 жыл бұрын

I didn’t have any problems with the 30’s. I think 32’s will be fine as well. I did run some 33” xm310 mud tires and they would barely rub on the front.

@WvTrailN

3 жыл бұрын

@@zacharyschultz8749 no those were on a different set of wheels. 33-9.50-18. My system 3 wheels are 5+2 offset and I think I could clear 32’s.

@WvTrailN

3 жыл бұрын

@@zacharyschultz8749 Merritt runs them in a 15” 6+1 all black with 31-10.50. No problems

@WvTrailN

3 жыл бұрын

@@zacharyschultz8749 no problem

Gusset kit?

@WvTrailN

4 жыл бұрын

No gusset kit.

They are definitely hard to get in and out of. It's very difficult.

You can get side view mirrors and a camera to help you back up. But you would have to get 20 years younger to not ache getting in and out of it. Lol. Nice rig bro. Thank you for the info.

@WvTrailN

4 жыл бұрын

I was in one the other day with side mirrors. They are kinda in the way getting in and out of the machine. He had the ones that mount up on the sides.

@thomascornelius510

4 жыл бұрын

@@WvTrailN I'm 55 years old myself bro. I feel your pain. Lol. But I'm gonna ride till I can't get in it know more. Lol

@WvTrailN

4 жыл бұрын

Think once I can’t get in/out anymore I’ll just stay in until I’m gone lol

@Macdad260

4 жыл бұрын

@@WvTrailN I have the Seizmik Pursuit mirrors mounted down low on the roll cage tube on my 2018 XDS. They work great. Not in the way at all. Still can't see directly behind but you can see to the sides.

@WvTrailN

4 жыл бұрын

Macdad 260 I’ll check those out. Side mirrors are required to go street legal here and I plan on gettin legal next spring.

How long do these last for? 10k miles?

@WvTrailN

3 жыл бұрын

I’m not sure. I have heard of them having 12-13k and still going strong. We will see.

@mikehaniotes3736

3 жыл бұрын

@@WvTrailN there’s some x3s out this way with 20,000 miles on them

They all have insides. That being said those are the reasons why I bought a pro xp. Drove both. Xp is a Cadillac compared to the thing.

The clutch noise to me is insane loud! The sound just goes right through my ears. Can’t ride in an X3 without hearing protection.

@WvTrailN

3 жыл бұрын

Something can am should definitely look at fixing.

@DUNEATV

3 жыл бұрын

@@WvTrailN I think we’re going to see a gear transmission like the YXZ but with a low range.

@WvTrailN

3 жыл бұрын

@@DUNEATV I liked my clutch model yxz a lot. Clutch x3 with a low would be awesome.

@DUNEATV

3 жыл бұрын

@@WvTrailN Omg yes...

@ThatcherKSA

3 жыл бұрын

My friend put sound deadening behind the seats and on that clutch area surrounding. Helps

Yxz! Yxz! Yxz!

@WvTrailN

3 жыл бұрын

I was starting to think nobody made it that far into the video lol

@funwithguns89

3 жыл бұрын

If there's yxz content I'll sure watch it.

I’m a little late but would love some YXZ content.

YXZ!!!

Myself owning x3 turbo, surprised no mention of driveshaft rattle?...after 200 miles....sounded like heat shield rattle, ...I searched, and searched...finally after a lot of research....found out, the sound is 99.9% common on all. That can am doesn't put enuf grease on the splines, and found out there's an actual service bulletin on the issue..but none of you guys with KZread ever mention?...

@WvTrailN

4 жыл бұрын

Haven’t had any noise from my driveline so far. I have a buddy with a 2019 rs and his has that problem with a couple hundred miles on it. We have 3 x3’s in our group without the rattle.

@WvTrailN

4 жыл бұрын

Believe it or not halfway finished with the very next ride and guess what?? Yup! Driveshaft rattle.

@jacobwagnercanamx3crazy941

4 жыл бұрын

@@WvTrailN in the can am service bulletin, they want you to remove both front and drive shafts, drill a hole, tapp and add set screw to receiving yoke by carrier bearing....screw that, I've learned all other people in the blog simply involved front driveshaft, slid it forward and packed grease in receiving yoke and splines,, problem solved!!...good luck..

@WvTrailN

4 жыл бұрын

Thanks. I just had the front diff out. Wish I’d did that while I was into it.

@HMXTrails

3 жыл бұрын

@@WvTrailN Grease only last about 2 rides on mine before it's rattling again even with the set screw. Got the 2020 shaft here to see if it'll make a difference

Can u see over the dash pretty good. How tall are u

@WvTrailN

3 жыл бұрын

I see ok out of it. Not great but it’s not real bad. I’m 6’

@jdub229r

3 жыл бұрын

5’ 8” put 2” seat risers, still not the greatest view. Wife is 5’ 2” even with rises can’t see shit.

Everyone I know that has a can am or polaris has problem.i so want on but guess I will stay with ole faithful yamaha

Buy the clutch relocation kit for 60$ lol

@WvTrailN

3 жыл бұрын

I added one. It helped a lot. Made it myself for like $10

Background noise not good buddy louder than my machine

I am a pussy on my 2020 Maverick X3 120 hp. I don't want to replace anything...lol

YXZ!!!