Can-Am Maverick X3 Switches For Easy Accessory Installation *8 Gang Switch Panel*
Жүктеу.....
Пікірлер: 33
@jakedibbert3163 жыл бұрын
I have the same max on order and I ordered the same controller yesterday. Glad to see it worked good for you. I think I'm gonna try to mount the main box somewhere else because I'm planning on putting a heater in that location
@luisjimenez58712 күн бұрын
I hooked mine and for some reason the on and off button is not working, the panel comes on but the center button is not responding. I hope it keeps my battery from draining.
@underourrock3 жыл бұрын
I love that installation location. I found your video searching for voswitch X3. I'm very glad to find another cheap brand to consider. Excellent video!
@MohawkDaveOffRoad
3 жыл бұрын
Thank you!
@terryjuelz5575
3 жыл бұрын
@Salvatore Alexander it worked and I now got access to my account again. Im so happy:D Thank you so much, you really help me out :D
@salvatorealexander997
3 жыл бұрын
@Terry Juelz happy to help =)
@scottfrasier51673 жыл бұрын
I Have a broken one on my x3 spend the extra money on something more durable. I put 230 miles on my car in Utah and the light pod was cool the first day but by the second day the fuse box is busted…. I’m getting a switchpro sp9100 as its replacement 🤞🏻
@antonioaguilar1968 Жыл бұрын
Can you send me the link for your windshield and wiper
@luisjimenez5875 ай бұрын
Will this keep battery from draining when not in use?
@MohawkDaveOffRoad
5 ай бұрын
Has not done it for me.
@seborracing2 жыл бұрын
So how’s the unit performing ? any issues, see someone asked the same question but you haven’t replied, so thought I’d throw it out there. Again
@MohawkDaveOffRoad
2 жыл бұрын
It still works great.
@seborracing
2 жыл бұрын
@@MohawkDaveOffRoad is it waterproof or water resistant? Been looking but haven’t been able to find where it say’s does it say in the manual? And thanks for the reply and would you do the 6 bank or stay with the 8. I
@MohawkDaveOffRoad
2 жыл бұрын
I would stay with the 8 as you can put blank stickers over the unused ones. I have one in my Jeep as well, and it has been fine with water.
@seborracing
2 жыл бұрын
@@MohawkDaveOffRoad ok they offer a single side or the 2 sided do you have a preference, don’t really see much difference except the obvious
@craigpiatt26789 ай бұрын
I have a heater that has a high and low can it be hooked to this or would the fan only be one speed
@MohawkDaveOffRoad
9 ай бұрын
It depends if you have input options on the heater. Each switch has a 12V output. If your heater has a 12v for low and a 12v for high, you would need to use 2 switches.
@keithshreck8796 Жыл бұрын
What is the part number for this kit
@MagargeeFilms8 ай бұрын
Is it possible to change the background color of the panel on this?
@MohawkDaveOffRoad
8 ай бұрын
They do have an RGB led version now.
@litonica2002 Жыл бұрын
No issues with this? I’ve seen people say they’ve have multiple units get sent out to them because switches are constantly on even if clicking them off, if it is a common problem I’ll most likely just go my original route with switch pros
@MohawkDaveOffRoad
Жыл бұрын
I have not had any issues with either one I have. I have one on my Jeep as well and so far it has been working great.
@sarahpettyYTSUX Жыл бұрын
So when my brother passed away in Afghanistan, he left me with his x3 and I'm trying to make it Street Legal here in Florida... I like the 8 Switch thing but there is a hole under neath the storage area that looks like I can just put in another pannel... I've looked for on but can't find anything... can you suggest anything?
@MohawkDaveOffRoad
Жыл бұрын
Sorry for your loss. Are you referring to this location? www.ebay.com/itm/175432303564?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&mkscid=101&itemid=175432303564&targetid=1645685075248&device=m&mktype=&googleloc=9013143&poi=&campaignid=16730423415&mkgroupid=135815925780&rlsatarget=pla-1645685075248&abcId=9300841&merchantid=6296724&gclid=Cj0KCQjw1vSZBhDuARIsAKZlijQZLo_rBgLtzXcmn2VeIeo2gf2DZjomSLH8l9dRPROQTNM5uoAuqNwaAhwnEALw_wcB
@litonica2002
Жыл бұрын
My condolences but is it under the start button? If so you may be able to put a panel there unless he may have bought a stay flush kit and it had cutouts for different accessories but I wouldn’t be able to tell for certain without seeing it
@TheJnava03253 ай бұрын
It doesn’t seem like your code is working.
@jalisco5092 жыл бұрын
Hope it’s still working out for you, but does this allow you to strobe the lights?
@MohawkDaveOffRoad
2 жыл бұрын
Yes still works great. It does not support strobe.
@jakemartinez63413 жыл бұрын
what fuse did you tap into for the jumper fuse?
@MohawkDaveOffRoad
3 жыл бұрын
No fuse, directly to the accessorie wire in the center console where the power was hooked up.
@kevinbrakebill93472 жыл бұрын
Have you had any problems with the switch panel yet?
Пікірлер: 33
I have the same max on order and I ordered the same controller yesterday. Glad to see it worked good for you. I think I'm gonna try to mount the main box somewhere else because I'm planning on putting a heater in that location
I hooked mine and for some reason the on and off button is not working, the panel comes on but the center button is not responding. I hope it keeps my battery from draining.
I love that installation location. I found your video searching for voswitch X3. I'm very glad to find another cheap brand to consider. Excellent video!
@MohawkDaveOffRoad
3 жыл бұрын
Thank you!
@terryjuelz5575
3 жыл бұрын
@Salvatore Alexander it worked and I now got access to my account again. Im so happy:D Thank you so much, you really help me out :D
@salvatorealexander997
3 жыл бұрын
@Terry Juelz happy to help =)
I Have a broken one on my x3 spend the extra money on something more durable. I put 230 miles on my car in Utah and the light pod was cool the first day but by the second day the fuse box is busted…. I’m getting a switchpro sp9100 as its replacement 🤞🏻
Can you send me the link for your windshield and wiper
Will this keep battery from draining when not in use?
@MohawkDaveOffRoad
5 ай бұрын
Has not done it for me.
So how’s the unit performing ? any issues, see someone asked the same question but you haven’t replied, so thought I’d throw it out there. Again
@MohawkDaveOffRoad
2 жыл бұрын
It still works great.
@seborracing
2 жыл бұрын
@@MohawkDaveOffRoad is it waterproof or water resistant? Been looking but haven’t been able to find where it say’s does it say in the manual? And thanks for the reply and would you do the 6 bank or stay with the 8. I
@MohawkDaveOffRoad
2 жыл бұрын
I would stay with the 8 as you can put blank stickers over the unused ones. I have one in my Jeep as well, and it has been fine with water.
@seborracing
2 жыл бұрын
@@MohawkDaveOffRoad ok they offer a single side or the 2 sided do you have a preference, don’t really see much difference except the obvious
I have a heater that has a high and low can it be hooked to this or would the fan only be one speed
@MohawkDaveOffRoad
9 ай бұрын
It depends if you have input options on the heater. Each switch has a 12V output. If your heater has a 12v for low and a 12v for high, you would need to use 2 switches.
What is the part number for this kit
Is it possible to change the background color of the panel on this?
@MohawkDaveOffRoad
8 ай бұрын
They do have an RGB led version now.
No issues with this? I’ve seen people say they’ve have multiple units get sent out to them because switches are constantly on even if clicking them off, if it is a common problem I’ll most likely just go my original route with switch pros
@MohawkDaveOffRoad
Жыл бұрын
I have not had any issues with either one I have. I have one on my Jeep as well and so far it has been working great.
So when my brother passed away in Afghanistan, he left me with his x3 and I'm trying to make it Street Legal here in Florida... I like the 8 Switch thing but there is a hole under neath the storage area that looks like I can just put in another pannel... I've looked for on but can't find anything... can you suggest anything?
@MohawkDaveOffRoad
Жыл бұрын
Sorry for your loss. Are you referring to this location? www.ebay.com/itm/175432303564?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&mkscid=101&itemid=175432303564&targetid=1645685075248&device=m&mktype=&googleloc=9013143&poi=&campaignid=16730423415&mkgroupid=135815925780&rlsatarget=pla-1645685075248&abcId=9300841&merchantid=6296724&gclid=Cj0KCQjw1vSZBhDuARIsAKZlijQZLo_rBgLtzXcmn2VeIeo2gf2DZjomSLH8l9dRPROQTNM5uoAuqNwaAhwnEALw_wcB
@litonica2002
Жыл бұрын
My condolences but is it under the start button? If so you may be able to put a panel there unless he may have bought a stay flush kit and it had cutouts for different accessories but I wouldn’t be able to tell for certain without seeing it
It doesn’t seem like your code is working.
Hope it’s still working out for you, but does this allow you to strobe the lights?
@MohawkDaveOffRoad
2 жыл бұрын
Yes still works great. It does not support strobe.
what fuse did you tap into for the jumper fuse?
@MohawkDaveOffRoad
3 жыл бұрын
No fuse, directly to the accessorie wire in the center console where the power was hooked up.
Have you had any problems with the switch panel yet?
What kind of switch pod did you get
@MohawkDaveOffRoad
3 жыл бұрын
Links are in the description.