CAN AM DEFENDER LIMITED OIL CHANGE ***EASY WAY*** no cab entry!!!

how to change the oil on your can am defender limited with out going through the cab, many people hate the oil change on a defender limited, one tool makes it 10x easier, follow along ill show you!

Пікірлер: 39

  • @MaxsAdventure.
    @MaxsAdventure.2 жыл бұрын

    Thanks for the vid. I only have about 10 hrs on mine but I'm glad to see it can be done without tearing apart the interior.

  • @Ohio-PPG-Trike-Adventures

    @Ohio-PPG-Trike-Adventures

    Жыл бұрын

    Looking forward to changing mine. NOT

  • @FJB247
    @FJB247Ай бұрын

    Just changed the oil on mine today like this. Was a lot easier than I thought it was gonna be. Took about 15 minutes. I did not take bed off or take cab apart. They did put the oil filter in a pretty stupid spot though in my opinion.

  • @dekklin5517
    @dekklin551711 ай бұрын

    Best Can Am oil change on the tube of you HANDS DOWN!

  • @rotaxrednex

    @rotaxrednex

    11 ай бұрын

    We appreciate it! Like subscribe and share please!

  • @lloydmarche7263
    @lloydmarche7263 Жыл бұрын

    Nice video. I have been looking at buying a defender. Access to service the machine is a plus for me. I currently own a first gen commander which is a pain to service.

  • @maraudermitchelli
    @maraudermitchelli Жыл бұрын

    You made an excellent video. I posted a video changing the oil removing the rear firewall panel and I get comments it can be changed easier and they reference your video. If I ever own another defender I may try the tile change your way...although I'm not as young and talented as you. Great job Merry Christmas 😊

  • @rotaxrednex

    @rotaxrednex

    Жыл бұрын

    Appreciate it!

  • @markp9779
    @markp9779Ай бұрын

    very helpful video thanks!

  • @Doug-pu5tf
    @Doug-pu5tf10 ай бұрын

    I did my first oil change this way, but I prefer to remove the access cover in the cab behind the seat to get better access to the oil filter recess as there is a lot of oil accumulation in there and I like to clean it out. Only takes a few minutes and if you need to adjust your valves you also have access to your front cylinder valve cover.

  • @rotaxrednex

    @rotaxrednex

    10 ай бұрын

    Of course to each their own buddy!

  • @lonniewilliams7240
    @lonniewilliams7240 Жыл бұрын

    installing u joints in front driveshaft easy way. single seat 22hd 10good videos thanks

  • @bryanzepp1931
    @bryanzepp1931 Жыл бұрын

    Looks like you have quite the stereo a video on that would be awesome if you get a chance

  • @kuniver748
    @kuniver7482 жыл бұрын

    Great video I was wondering 🤔. No backseat removal thanks 👍

  • @rotaxrednex

    @rotaxrednex

    Жыл бұрын

    No problem 👍

  • @vinny4020
    @vinny4020 Жыл бұрын

    How did you reset your maintenance minder light?

  • @skeim5620
    @skeim56208 ай бұрын

    How do you like the buggy

  • @outfitr9703
    @outfitr97032 жыл бұрын

    My manual says 2000 miles, no mention of early first change so mine isn't going to get changed till I get 2000 miles on it.

  • @rotaxrednex

    @rotaxrednex

    2 жыл бұрын

    This on idles more then it drives to each their own!

  • @1911smokinggun

    @1911smokinggun

    Жыл бұрын

    200 hour first change

  • @linnjensen7469
    @linnjensen74695 ай бұрын

    Polaris has a screw on filter this almost makes me go Polaris , the only difference in this and my older can am is I wouldn't have to take the engine cover off to get the filter out but my old one is definitely easier to get the screws out and replace the filter

  • @smokinbutts2
    @smokinbutts22 жыл бұрын

    Could a remote oil filter be installed somewhere else?

  • @rotaxrednex

    @rotaxrednex

    Жыл бұрын

    Yes MR.RPM makes a kit.

  • @grantparnes

    @grantparnes

    2 ай бұрын

    @@rotaxrednex Did your defender have HVAC? ONE, if it did I would argue no way to get a Milwaukee in there. TWO, the RPM spin on kit does not fit models with air con. I changed mine yesterday for the first time by going thru the cab and would deem it near impossible to do (with air con) from the engine side. NOT without dropping a bunch of crud into the filter housing anyway. BRP obviously wanted the dealers changing the oil, because this filter type and location is ignorant at best. The angle of the filter housing does not even allow complete draining of the used oil in the house. DUMB location.

  • @rotaxrednex

    @rotaxrednex

    2 ай бұрын

    @@grantparnes I can do it one handed now from the engine bay now that if done it so much 😆

  • @philipjean1086

    @philipjean1086

    2 ай бұрын

    Wish I had seen this video before I changed my filter. Really it’s not that hard once you know what your up against. It is intimidating because it is so cramped. Next time I’ll try to get some cord around those hoses and move them a couple inches away from cap it would a lot easier if hoses weren’t in way

  • @jasonpond7866
    @jasonpond78664 ай бұрын

    Do you change the other fluids?

  • @rotaxrednex

    @rotaxrednex

    4 ай бұрын

    Yeah we change everything

  • @keithundefined6453
    @keithundefined64535 ай бұрын

    Take a min. and remove the air box for more arm room to get in there

  • @candyman1967
    @candyman19677 ай бұрын

    Lube oil filter rubber to prevent dry rot. Explain more please 😂🤦‍♂️

  • @linnjensen7469
    @linnjensen74695 ай бұрын

    I am looking at a Defender and if I had to take the cab off I would go to Polaris

  • @rotaxrednex

    @rotaxrednex

    5 ай бұрын

    You don’t take the cab off, it’s a panel in the cab that comes off, but the easiest way is to just take off center skid plate it take 10-15 mins now for the whole job that’s how I do it nowadays

  • @candyman1967
    @candyman19678 ай бұрын

    Helps prevent dry rot comment 🤦‍♂️

  • @theCALBOYGIXXER
    @theCALBOYGIXXER Жыл бұрын

    So the trick is with the Milwaukee 😅 come on bro I'm not going out to buy a Milwaukee just to do an oil change!

  • @cathykenny6440

    @cathykenny6440

    11 ай бұрын

    you can do it with 8mm deep socket ..dont drop the bolts .when reinstalling start and hand tighten bolts as much as possible ,then snug ..not too hard to do ,one thing to note my hd10 manual says 2.221 quarts ..too much... its actually about 2.1 qts ,had to take some out ..

  • @penniesfromheaven2511

    @penniesfromheaven2511

    8 ай бұрын

    @@cathykenny6440all these people complaining about how hard this is, have never done any real wrenching. Ever r and r’d a 6.0L ford turbo or a 5.4L exhaust manifold? Then u can complain. It’s 3-8mm bolts people, my 10 year old can do it ffs.

  • @mcm542
    @mcm542 Жыл бұрын

    Looked into this in detail today. This a major design flaw in my opinion. Total deal breaker.