Time to get another loan from the bank.

@specagent6918

4 жыл бұрын

What’s that water thing before the idol

@swooby8824

3 жыл бұрын

jajajajajajajajaj fuck you i FUCKING HATE YOU

@norlanorellana788

2 жыл бұрын

Hell yeah 😂

@smedlz

Жыл бұрын

@@specagent6918 huh?

@specagent6918

Жыл бұрын

@@smedlz the first 5 seconds you can hear water being poured into something but on headphones

I didn’t realize how good the ls1 was it can be modified and sound better than any fords and dodge hemi. I just bought a 2004 corvette I love it.

God i love the design of the c5's. They are aging like fine wine.

@JereMiah-tg8to

Жыл бұрын

No kidding! I've been a mustang die-hard all my life but chevy did these god damn things right!

I love the taillight blackouts,and the black part of the lower bumper. Looks and sounds great!

@_____Justin______

5 жыл бұрын

Jay Dobbins thanks! I taped off that lower section and sprayed it myself haha

@J1Z06

5 жыл бұрын

A few people suggested taking that route... thanks!

@_____Justin______

5 жыл бұрын

Jay Dobbins yep. I used plasti-dip just in case I screwed it up haha

@J1Z06

5 жыл бұрын

Air Force Vette I might have to try that!! I need taillight blackouts and black wheels after that. I’ve always loved that look. Thanks again.

@JustinSybron

2 жыл бұрын

wow that dip looks absolutely amazing. i thought it was just a customer diffuser

💛perfect corvette sounds amazing

sounds so goooood!!! almost time for mine to be chop chop chop

Wow sounds like heaven

Can't wait to get my 98 cammed,this thing is sick!

@_____Justin______

3 жыл бұрын

Thanks man!

Great looking and sounding ride my bro.

The 💛🖤 looks sick AF

Sumbitch sounds Wicked. 👍🏾💪🏾

Oh you are in Washington? Dope. Love it. Millennium yellow and good mods!

@_____Justin______

5 жыл бұрын

Andrew J thanks man! I actually recently moved to New Jersey. Washington was great though!

@AndrewJaws

5 жыл бұрын

Air Force Vette oh sweet, did you sell the car?

@_____Justin______

5 жыл бұрын

Andrew J yeah it’s sold. I’ve got a 2018 ram and a SRT4 now.

Beautiful

Damn that sounds great!

Bad ass car

@_____Justin______

6 жыл бұрын

Juan Mendez thanks bro!

@juanmendez4535

6 жыл бұрын

my friend wanna cam his corvette what cam u pull on your men

@_____Justin______

6 жыл бұрын

Juan Mendez that’s a Texas speed 228r cam with a 110 lobe separation

@juanmendez4535

6 жыл бұрын

thanks men the thing saund good

Just bought a 2001 can’t wait to throw a big cam and full exhaust on it !

@deeznutzz101

Жыл бұрын

Don’t go with a big cam!! You will be sorry.

Did you do headers with the cam & automatic or stick ? I’m looking at a circle d 3400 stall in my C5 over winter cam & headers yours sounds nice though 💯✌️

Awesome

Love it

Beautiful car! And those cams sound really bad (in a good way).

@markcrawford8876

4 жыл бұрын

Cam is not plural in the 5.7

Not bad bro, not bad at all

What cam did you use that sounds amazing

Its like an orchestra such beautiful music. With a cam that big and choppy and less engine vacuum did it affect your brakes?

Bad ass man. Sounds sick

@_____Justin______

6 жыл бұрын

Tyler Davis thanks dude. I’ll be making. Some good flyby videos here soon. I keep trying but the cops are sitting on the spot we go to haha

@tylerdavis9439

6 жыл бұрын

Haha I hear ya. I’m saving up now to get my hands on a c5. I’ll sub to check them out

@_____Justin______

6 жыл бұрын

Tyler Davis I appreciate it man! If you have anything you’d like to see a video on please make a suggestion!

@tylerdavis9439

6 жыл бұрын

Will do!

Yes

Sick car man. What year?

What exhaust ??

Hey Justin, I also live in Washington state and I'm looking for a place to install a cam in my truck. Can you please tell me who did your install for you? Thanks in advance.

🤘 witch cam are you running?

Soundz bad azz

Frc cool man !

@kaycebrown3090

4 жыл бұрын

Richy Soto it’s not and FRC?

My main reason to keep living is to buy a C5 corvette

hey m an. absolutely sick car. I'm looking at the TSP cam packages now I have an 01 coupe. i'm picking up a set of 243 heads and figured i'd do a cam too while i'm at it. any feedback on how it is before/after? have you had it on a dyno? and any feedback on how this cam is with boosted applications? Thanks man!

@_____Justin______

5 жыл бұрын

Obsessive Hobbies this cam is not good for boost because of the valve overlap. You would want something with a wider lobe separation angle for that. As for the car, it was like a completely new car after the cam. It went from kinda quick the a pretty fast car lol. Drivability is great, but that’s all in the tune. That’s the biggest thing with these cars. You NEED a really good tuner.

@obsessivehobbies5464

5 жыл бұрын

@@_____Justin______ thanks man. After I saw this I found their bald eagle cam that cleatus runs. I think I'm going to go that way. Thanks man! Car sounds awesome.

@americancountryboy8015

2 жыл бұрын

@@obsessivehobbies5464 ya well they made a special grind for him and sold a different but similar cam to the public under his cams name.

Did you upgrade the springs to beehive or double? Or are they stock still? Also did you change out the torque converter?

@_____Justin______

4 жыл бұрын

Marcus martian8 they’re dual springs and titanium retainers and it’s a manual so I changed to a McLeod twin disk clutch

I wonder how that c6 zo6 shifter feels

where do you have your switch for the 2 step mounted

@_____Justin______

5 жыл бұрын

Silas Brown its a pedal switch under the clutch pedal

What axelback exhaust is on it? Does it have any bullet mufflers or just straight pipe all the way from headers to tips?

@_____Justin______

5 жыл бұрын

Erik F SLP Loudmouth axleback, so yeah no mufflers or anything through the whole system. Completely straight piped.

Definitely thinking of selling my built Chrysler 300 5.7. For a C5, want mine just like this one

Maybe a stupid question but i honestly dont know it, if you cam it do you need other motivications too because of the diffrent valve openings? Like bigger fuel pump or something? Thansk for the Answer, and awesome car!

@snowtex6330

3 жыл бұрын

Modifications*

That thing is sick man! can't wait to bring my vette back to life. What size rims are in the back? 18X10.5?

@_____Justin______

6 жыл бұрын

Jorge Martinez yep 18x10.5! Thanks dude good luck with yours!

Do you have your tune file by any chance?

sounds like it should

Did you add a stall converter on this setup? I’m looking at doing everything the same but some forums say they recommend getting a bigger stall converter? Just want to make sure the stock one will do fine!

@_____Justin______

5 жыл бұрын

Tyler Vowell I would definitely get a bigger stall or it’s going to be a pain in the ass to drive. My car is actually a manual trans car so no stall lol

What size wheel do you have on the rear those 3:15 look nice on there

@_____Justin______

4 жыл бұрын

curt5253 they’re 18x10.5 on the rear with 315s on them. The tires are toyo’s

Justin,are those the stock wheels in the back and front?

@_____Justin______

2 жыл бұрын

They’re stock replicas that are widened and powdercoated

thats entering bald eagles per mile territory

@_____Justin______

3 жыл бұрын

Lol it actually does pretty good on the highway

I have a 98 auto trans C5. I was looking at like a btr stage 3 cam or this one sounds nice too. Which would you suggest that sounds mean, gives power and idc too much about mpg even though my daily for now is my C5. Any other mods I should do when getting the cam so other things don't break or what? Thanks man!

@_____Justin______

5 жыл бұрын

GreyC5 well since you have an auto you’re definitely gonna want a new converter with a higher stall. Also you need valve springs, retainers, pushrods, and some ls7 lifters since ours are prone to lose their retaining pins with higher lift cams. As for which cam, that’s really up to you. I’d go for something with really good mid range. Something with super high lift is just gonna push your power band up higher. Maybe btr stage 2?

@614XJ

5 жыл бұрын

Air Force Vette Thanks for the quick reply! And alright I'm making a list and looking around for deals. And I'm not too sure what the mid range and stuff you're talking about. But what's the difference between the stage 2 and 3 cam? And should I consider new gears, or a pulley to get faster acceleration?

@614XJ

5 жыл бұрын

Like yours sounds great! I wonder what mine would be with the magnaflow exhaust. I just have a blackwing cai and magnaflow performance exhaust no mufflers or resonators. Need a little more noise from my boy. I want it to raise hell and be angry just sitting there. The stage 2 what I heard from a video on a ls1 C5 sounded ok, maybe they had mufflers or something lol

@_____Justin______

5 жыл бұрын

GreyC5 you need longtubes lol. Do all the basic bolt ons first, then the cam. That thing is gonna be sucking some air with a nice big cam so you want it to be able to breathe as efficiently as possible. I love the cam I have but it’s actually very mild for our cars. I’d suggest a tsunami, a bald eagle cam, or any other Texas speed cams. They make great power! Just be sure to do all of the valve train upgrades needed for the cam. The high lift cams are rough on the valvetrain

@614XJ

5 жыл бұрын

Awesome thanks for advice man

AFV, who tuned the car for you? Were you happy with the way it drove? Bummer you sold the car.

@_____Justin______

5 жыл бұрын

MRBLACK947 Marty Stromberger if Stomberger performance in Spokane tuned it and installed most of the parts on the car. It drove amazingly and had no issues whatsoever. He did it for an awesome price as well. Yeah I’m bummed about the car. I plan on getting another but it will most likely be a C5Z. Right now I’m building the Srt4 for the road course and I’ll be doing some videos on it as I get the parts together.

@PNW_Car_Mods

5 жыл бұрын

Thank you good sir. Although I should have noted the scenery in the background I was really hoping you had a place near JBLM do it for you. With a couple million people on the west side of the state you would think there would be more tuners lol.

I thought the audio was bad and the sprinkling water in the beginning was the cam😔

with a manual trans car they always trap high per ET. I bet on a good launch it goes 12.2 to 12.4 range. why baby the launch THAT much though? are those rear axles or gears weak like the stock 4 gen fbody's? nice car. and THANK YOU FOR YOUR SERVICE!

@_____Justin______

2 жыл бұрын

Thank you! the stock trans and diff with no brace can break with moderate wheel hop. That was the first launch I ever did on a prepped surface with the car so I was really careful with it lol. I definitely could have launched it a bit harder though.

@josephforcino6399

2 жыл бұрын

In 2001 they upgraded the axels.

What cam do you have in the car love the sound

@_____Justin______

2 жыл бұрын

It’s a Texas Speed 228R cam with a 110 LSA

What's the exhaust

Muffler deletes or are there mufflers with the headers and x pipe? Goals right here! Fully built ls1

@_____Justin______

Жыл бұрын

No mufflers or any other restriction in the exhaust

@14truelies

Жыл бұрын

Gotcha thanks. Love it! Planning on a c5 soon. Either fully build hci ls1 or swap in an ls3 hci with the holley terminator ecu.

What stage Cam you got on there sounds great

@_____Justin______

2 жыл бұрын

It’s not really a “stage” cam. It’s a Texas speed 228R cam with a 110LSA

Power numbers?

Roughly how much did you spend for engine mods plus exhaust?

@michaelschausten5257

5 жыл бұрын

Not my car, but everything he did, installed, probably around $5k at least.

@_____Justin______

4 жыл бұрын

Jay Ro everything installed and tuned for about $6500

What were the power numbers with the set up if you know?

@_____Justin______

6 жыл бұрын

Brandon Smith 400whp and 379wtq

so did you end up having to flycut or no also did you ending up doing a timing set?

@_____Justin______

3 жыл бұрын

I did a timing set and oil pump gears, but did not have to fly cut since the lift on the cam was only around .600” I think.

@bart132486

3 жыл бұрын

@@_____Justin______ yea should be .600" okay thanks man did you do the oil pump gears as an upgrade or cause you were already in there? also i see there is a couple different McLeod rst clutches do you happen to remember which one it was ? i really wanna throw this whole set into my 03 z06 ls6 already has the cathedral 243s on it so was just wondering

@bart132486

3 жыл бұрын

@@_____Justin______ also has a full corsa extreme long tube x pipe and axle over system no cats

@_____Justin______

3 жыл бұрын

@@bart132486 I did it since we were already there. When I bought the clutch it was just called the McLeod RST twin disc clutch. It’s rated for like 900hp or something. Also, make sure you get a remote clutch bleeder for the car.

@bart132486

3 жыл бұрын

@@_____Justin______ yea makes sence nothing simple about bleeding that system at all pain in the ass did you master and slave for the clutch as well or no and did you change lifters? sorry for all the questions

Bad Ass C5, what year is it, and what did you use to black out your tail lights ?

@_____Justin______

6 жыл бұрын

The Jeep Posse thanks man. It’s a 2003 and I used nightshade to black them out. I wet sanded them smooth, used 3 coats of nighshade, and then did 3 coats of gloss clear coat over that.

@ROADWARRIOR21

6 жыл бұрын

Nice Job thanks man.

According to your own description, a lot more then just cam only.. But great sound!

@elkado6302

4 жыл бұрын

Cam only usually means it’s not blown

@mrGW

4 жыл бұрын

@@elkado6302 no it means cam only, boltons means everything except blower/turbo

@_____Justin______

4 жыл бұрын

Gustaf inhocsignovinces who would actually put an aftermarket cam in an otherwise stock car lol

@mrGW

4 жыл бұрын

@@_____Justin______ a lot of people..

@_____Justin______

4 жыл бұрын

Gustaf inhocsignovinces really? Name one.

Wow …..

Why do these sound so much better than the ls1 fbody

@henry.schafer

4 жыл бұрын

True duals

that things BAD i’d pay good money to have those cams

Hey man may i ask what wheels those are? Love them

@_____Justin______

3 жыл бұрын

Thanks! They’re OE C5 replica wheels in deep dish. They’re 18x10.5 rears and 18x9.5 fronts.

@Delusionalmfs

2 жыл бұрын

@@_____Justin______ what kind of tires do you have on ?

@_____Justin______

2 жыл бұрын

@@Delusionalmfs they’re toyo T1R’s I believe

Did you have to tune it with those cams

@_____Justin______

5 жыл бұрын

....didn’t you already ask me this question? You’re going to have to tune the car no matter what can you get. If you can’t afford to tune it then don’t buy cams.

What front tire size do you run?

@_____Justin______

3 жыл бұрын

Anthony Trivette 265/35/18

any chatter with the mcleod clutch?

@_____Justin______

3 жыл бұрын

J Cloud none actually! It really felt like a slightly stiffer stock clutch and made zero noise. Highly recommend.

What cam are you running

@_____Justin______

2 жыл бұрын

Texas Speed 228R 110 LSA

How much was it for just the tune?

@_____Justin______

3 жыл бұрын

I actually new a guy who I lined a race shop and got a crazy deal. He installed everything and tuned the car for 1000$

What RPM are you idling at?

@_____Justin______

3 жыл бұрын

It’s around 900 I believe. Initially it was set too low at like 700 and would sometimes shut off when pushing the clutch in after a pull or stopping.

What type of cam is in it?

@_____Justin______

4 жыл бұрын

Michael De Pree Thode it’s a can from Texas speed. It’s a 228r with a 110 love separation angle

I see the list of the other mods, had this video been really been made only when this was camned and you did all those other things after?

@_____Justin______

3 жыл бұрын

This video was made after all mods were installed and the car was tuned

how much does this alll of this cost in total?

@_____Justin______

5 жыл бұрын

SnakeStrike 612 I did all of this at once from bone stock down to the wheels, to what you see in the video. That even includes tires and it costed me around $6000 completely finished.

Nice vette. Sounds great too. Just needs a good wash and detail. All the lower facia and wheel wells are a mess. That’s just me though. I always give my vette a good clean

@_____Justin______

3 жыл бұрын

Yeah it’s dirty I had just driven it quite a ways before the video. It’s dusty in the summertime

Would you say this is stage 1,2,3 or 4

@_____Justin______

2 жыл бұрын

“Stages” are for teenagers with shitbox Honda’s. It is what it is.

What exhaust looks like muffler delete

@_____Justin______

5 жыл бұрын

9th gate dim tsp headers, catless xpipe, slp loudmouth

Is this stock yellow!?!! No way!?!

@_____Justin______

2 жыл бұрын

Yep it’s called millennium yellow

@yammahi

2 жыл бұрын

@@_____Justin______ the cleanliness and sunshine gave it a special glamour ... I’m in the market for a silver or a yellow ... you just tipped the scale

Not cam only read description

What does she run on a Quarter-mile

@_____Justin______

4 жыл бұрын

Matthew Um14 I never got a good run in it before I sold it because I was scared to break the red end. I slow rolled it off the line being very careful and still trapped around 115 or so. If I had launched it, it probably would have trapped around 120 which would be a low 12 or high 11

What exhaust?

@_____Justin______

4 жыл бұрын

Chepo_LSX slp loud mouth axleback, tsp longtubes, tsp x pipe

@Chepo1500

4 жыл бұрын

Air Force Vette what cam ?

@_____Justin______

4 жыл бұрын

Chepo_LSX Texas speed 228R with a 110 lsa

@Chepo1500

4 жыл бұрын

Air Force Vette i have btr stage 3 with corsa . The SlP sound loud af

Did you have to tune for the cam?

@_____Justin______

5 жыл бұрын

OMWTFYB yeah definitely. This cam has a good amount of valve overlap because of the close LSA. That makes it not want to idle well because it’s not pulling as much vacuum. Once it was tuned it ran like a raped ape. It makes great mid range power

@rayzelito

5 жыл бұрын

@@_____Justin______ alright, thanks man. Nice car btw

@_____Justin______

5 жыл бұрын

OMWTFYB thanks man and no problem!

@rayzelito

5 жыл бұрын

No problem bro. Did you have long tubes in this video to?

How much wheel?

@_____Justin______

4 жыл бұрын

Zachary Jones like what size are they? 18x10.5 in the rear and 18x9.5 in the front

@zacharyjones1277

4 жыл бұрын

Air Force Vette talking horsepower , have you gotten in on a dyno ?

@_____Justin______

4 жыл бұрын

Zachary Jones oh yeah I’ve got a video of it on my channel

What length pushrods?

@_____Justin______

6 жыл бұрын

Christian barnes they’re 7.400” pushrods

@christianbarnes4657

6 жыл бұрын

Air Force Vette just ordered the same cam for my c5.

@_____Justin______

6 жыл бұрын

Christian barnes nice! Same LSA and everything?

@christianbarnes4657

6 жыл бұрын

Air Force Vette yes, how bad was car until tuned?

@_____Justin______

6 жыл бұрын

Christian barnes the idle is set at 950

Just a cam? That exhaust looks aftermarket.

@michaelschausten5257

5 жыл бұрын

Well, there really is no such thing as "just a cam". I mean you could in theory but it'd be a waste of time and money without any supporting mods.

What exhaust is it?

@_____Justin______

5 жыл бұрын

ben lance it’s in the description

@_____Justin______

5 жыл бұрын

It’s got slp loudmouth catback with an x pipe and long tubes from Texas speed

@dirk1689

5 жыл бұрын

Ok thanks. Sounds great

@_____Justin______

5 жыл бұрын

ben lance thanks man

Is the engine stock?

@_____Justin______

2 жыл бұрын

The rotating assembly is stock, just a cam and valve springs/retainers

@dan4892

2 жыл бұрын

@@_____Justin______ Thank u for the respons! Beautiful car u got!

"Cam only" if you dont count the long tube headers, x pipe and straight piped!

@_____Justin______

4 жыл бұрын

Mark Crawford no one does a cam without exhaust.

@markcrawford8876

4 жыл бұрын

@@_____Justin______ well mention it AFV, instead of "cam only" come run my supercharged only Elky! With your cam only C5

@_____Justin______

4 жыл бұрын

Mark Crawford read the description dipshit it’s in there

What exhaust is this? It’s porn to my ears. I’m doing same to my 03 yellow vette as far as mods go. Except I’ll add 243 heads. Love the sound man!

@_____Justin______

3 жыл бұрын

Thanks man! It’s just Texas speed long tubes, careless x-pipe, and SLP Loudmouth axle back

@deadpoolphantomjohn265

3 жыл бұрын

@@_____Justin______ if I just put in a straight pipe instead of the loudmouth... will it be louder?

@_____Justin______

3 жыл бұрын

@@deadpoolphantomjohn265 it can’t get much louder than what I had. There’s not a single muffler or restriction at all the whole system

@deadpoolphantomjohn265

3 жыл бұрын

@@_____Justin______ ahh it must be way louder in person then

@_____Justin______

3 жыл бұрын

@@deadpoolphantomjohn265 yeah it’s ridiculously loud lol

315s tho

@austinstratman1809

2 жыл бұрын

yeah, whats that?

@davidv6408

2 жыл бұрын

@@austinstratman1809 tire width

Not a fan of C5 at all but does sound nice

@_____Justin______

3 жыл бұрын

People either love them or hate them usually. They’re probably the fastest car you can buy for the money though.

That mod list isn't "cam only" lol...

@_____Justin______

4 жыл бұрын

Smitty Werbenjagermanjensen no one in their right mind would literally only do a cam in a stock car. Come on dude.

Ermahgerd…

🥱🥱🥱