Between watching Steve Morris and Chief tech videos I’ve really learned a lot of little things that add up trying to achieve maximum performance from an engine. Steve and Chief both describe things in ways that anyone who is mechanically inclined can absorb and replicate. Props to Jackie, she is pretty sharp as well and definitely understands exactly what’s going on…impressed with the correlation she made with the timing related to the rear gear and torque converter. Chief and Jackie y’all are a awesome team 🤘🏼

@garyk76

Жыл бұрын

Me too buddy

@tripprogers4814

Жыл бұрын

Same here. Now I’m more confused than ever lol

@BlackwaterMT

5 ай бұрын

These tech videos are nice

Legend says Craig Ritchie still talks about that damn wheel every time someone mentions SO to this day.

@justinshearer3016

Жыл бұрын

well hopefully someone will let him know i still have it and i do plan on returning it lol

@bricesiders6468

Жыл бұрын

Just wait till the next guy needs to borrow a tool lol

@bryanluntz1603

Жыл бұрын

Coulda been racing Tang

@KimiWallrus

Жыл бұрын

Ole boys program was ended when the valves munched pistons. He was found next to the car in the garage later that morning against his done blowed up unit. They said it was his last bullet, and his eyes were open staring at a paper plate used as a makeshift timing wheel.

@jacobkilen1762

Жыл бұрын

​@@justinshearer3016 eh you will borrow it out to some young kid then never get it back itll be returning the favor😂

Let's all take a moment to thank Craig Richie for his assistanc and his wheel. Without him, the world would be a darker place, and this video would be a cat video with no camshaft stuff. *_Thank you Craig Richie!!!_*

@justinshearer3016

Жыл бұрын

not all heros wear capes lol

@swamprat69er

Жыл бұрын

And there is something 'wrong' with a cat video? lol

Thank You for the degree lesson. At 79 yrs old I am still learning.

"8 degrees of Big Chief" is the new "6 degrees of Kevin Bacon"...

Honestly probably one of if not the best camshaft timing/degreeing videos on the KZread's killin it

@MidwestStreetCarsAuto

Жыл бұрын

thank you!!

That look of fear Chief gave that Jackie not only understood what was going on but helped to define the info coming out was priceless! Don’t u side eye Jackie Chief! 🤣 Love yall

@bryanluntz1603

Жыл бұрын

👁️👁️

Watching this video makes me appreciate what Big Chief has achieved in his Crow much more. And why he was always on the top of " The List"!

Its good 2 hear Jacki laugh and carry on. Juno approved all you 2 did 2. Great video and thanks 4 sharing.

I'd love to see the crow in action this year. So many didn't understand how big a underdog chief was for the longest. He competed with big money equipment and still won more than he lost , with that little butler twin turbo... love that car.

@bryanluntz1603

Жыл бұрын

Clawd n Clawdette😃

@realazliving

Жыл бұрын

Yeah. I don't watch tv ever so I had no idea who they were. But the second I saw a pic of that sweet Pontiac I couldn't not watch. If that thing doesn't make you look you should think about googling "cool".

@WillChandlerFLD120

Жыл бұрын

@@realazliving chief modified hood windshield added the wing when he'd got all he could out of the engine and it kept the crow competitive. Too bad crybaby ungrateful racers brought on the show ruined cheif running Texas. I really think the mwsc would have come out #1. we all saw them test the crow was ready.

This setting is so much better than any TV production and the information provided is steller!! I've been racing since 1971 and love your content. Well done Jackie! you too Justen Lol

Gerald literally seems like he's been making videos forever.. I compliment him all the time .. I guarantee he usually is silent all day working alone so to be doing that so nonchalant on camera talking explaining perfectly is pretty crazy

@realazliving

Жыл бұрын

Yes. He's a natural teacher. His knowledge is next level squared. He acts like super advanced stuff is just whatever. I love his channel already.

So my husband watches your videos....I do by default. Thanks for this video. I had no idea how complicated things were at this level of the build. Also Jackie, thanks for clarifying "less retarded" because I was so confused by then. I do enjoy the kitties, and your banter between each other. Love your work.

Craig Ritchie...the biggest what-if GOAT of street racing. Career derailed due to a lent out Pro Degree Wheel that was never returned :)

@bryanluntz1603

Жыл бұрын

Ain't that the Way...

@bryanluntz1603

Жыл бұрын

I'm lookin' for the bit I loaned to Drill Bit Taylor 🙂

@alfee9411

2 күн бұрын

Lmao

Tune in for the next episode of midwest streetcats 😂 Getting to the juicy part of the build now Love you guys 👌

I could watch you work on cars all day long. I learn something every video

Awesome video, Chief and Jackie. Can't wait to see CaddyJack back together. Best team at midweststreetcars. You guys are #thebestinthegame

That vintage Little Cesar box is great. But nothing like you two. Hope things are going well for you both.

Look forward to these videos, thanks for all the effort and humor..you guys made my day better

I am so glad yall started doing these videos explaining this kind of stuff you do it to where it's easy to understand thank you keep up the great content

Such precision with everything yall touch! It's like watching magic happen in slow motion lol. 😁

Thank you Justin, sharing this type of stuff is awesome and we all definitely appreciate what you and Jackie do!

I always learn a little watching your videos. You guys make me laugh every time. I love how Jackie gets distracted by the kitty while chief is talking. Getting closer to hearing her come to life!

Love watching chief and Jackie. They are a huge inspiration to me. Been following chief since day 1. Learned a lot from just watching there videos. Good people be really cool to hang out with that’s for sure. Keep up the good work.

That was awesome guys.. thanks you guys have brightened up my day 🙏🙏

Thank you for the in depth explanation & tutorial on how to degree a camshaft... This type of video is always helpful to viewers...

Great job Chief and Jackie, can't wait to see Caddy Jack up and running!!!

Excellent video. I use Comp Cams tool which goes in the lifter bore and uses a dial indicator to measure the lift. I definitely would have messed up all the readings because of Jackie’s commentary😂

I'M SO PROUD OF JACKIE, SHE WORKS SO HARD AND HAS TIME TO TAKE CARE OF TWO AMAZING KITTIES, YOU ROCK JACKIE!!! ps/ love the kitty 🐈 hotel in the shop. Those cats love you two so much, they got that drool love lick 😋, so cute!!!

I love these technical videos, chief has a great way of explaining stuff.

Thank you !!! That was a great example of how to degree a cam I'm going to order a degree wheel as soon as I'm done writing this

Jackie your editing skills have improved. The music is killa. The quality is spot on. Great job. Thanks for the videos. I could listen to Chief all day.

Thanks Miss.Jackie and Chief, I like how you explain things , Chief, you explain things for beginners. I learn years ago to explain things for beginners since most people teaching other don't do a good teaching others.

Love it, can't wait to see Caddy Jack back making rips. Keep the content coming, love following you all along this ride.

...great video ! The explanation of using a degree wheel is much better than my first training years ago, yours is easier to follow than the 'box instructions' ! The cats are cool !...

Thank you for another great video. Much love to you both ✌🏻

1st time I've ever seen someone actually explaine how to do this in language I can understand. Thank you for another awesome video

Hi BC& Ms Jackie thanks for another awesome video. Ms Jackie is always paying attention and very knowledgeable. BC the real race master.

Progression is always good. May not be where you want to be but ya still moving forward! TY for sharing.

Very informative! Thanks for sharing.

Thanks for filling me in on what I missed growing up in the 70s,, I always had to be out in the shop,,as soon as he would start I was out lol,,mom to the rescue...

Thanks for sharing your knowledge and passion of building performance engines

Hell yeah it's Chief and Jackie time

Your methodical and systematic way of breaking down an engine and rebuilding it is an artform! Your understanding mixed with common sense and ocd makes it very understandable to someone thats clueless 👍

So I have watched content on degreeing cams , after this time I believe you are a good teacher. Thanks for content and God bless all.

Another great video I like the way you explain why you do things and how and the reason keep up the great work

Great Video,can't wait to see you y'all back racing!!

Again!!! Master's at their craft. I feel like I have been going through race engine university....This was one of the best episodes I have watched...and hear I thought Chief was just a driver, he knows his stuff and Jackie be like no it's it advanced it still retaraded...Love it just love it....

Damn it's awesome watching and learning from you pretty cool shit yall have going on and not far away from race season

Always droppin knowledge on us!! Thanks for showing why you always need to check. Gerald's videos show the same type of knowledge 🫡 Us 2 first namers are learnin from ya'll no mater if your semi-pro or full pro hahaha

Its awesome to always check what you have I stalled that way you have no issues at the track , just tuning love you guys we all have learn eryday much love guys tha ks to you all and especially pro craig😊

I did the same thing on a lot of Toyota 1hd diesels after servicing the Diesel pump and injectors. Vernier Pulley and set the cam timing to factory. Was the only way for them to make the advertised power within emission regulations.

12:43 😂😂😂😂 “at least 3 and a half degrees “

Great video guys! You both know your stuff and are a great complement to each other. I got my new Caddy Jack shirt early this week and LOVE it! Thank you!

@MidwestStreetCarsAuto

Жыл бұрын

thanks for your support gregg!

@justinshearer3016

Жыл бұрын

thank yoU!

Welcome to chief and Jackie's full on engine building KZread channel 😂 love the content guys!!!!🎉🎉

You guys make such an amazing team together!!

Chief thank you I don't build motors but you said it and Jackie too that even I could follow you!!! That's what's important teaching the unreachable !!! Very cool!!!

Thanks for the video . i learn something every time

Very Very informative chief goes out of the way to explain in detail plus the comedy had me rollin

great video! very informative!

If PTV allows... it would be interesting to see what it does installed on 110ICL than backed up 2 or 4 degrees at a time to the 118ICL it was. My suspicions are the way it was installed on a 118 the Intake valve close event was more than the motor was asking for even for 8500RPM. From what i learned you get to a point where the "port stalls" and you cant fill it any longer and continuing to laten the IVC event nets no gain. I call it saturating the port. Obviously rpm/bore/stroke piston speed also play roll but if a heads only gonna move what it can move no point holding the door open longer, unless ofcourse your really trying to midigate cylinder pressures for other reasons LOL. Good video!-Bobby

@justinshearer3016

Жыл бұрын

thanks bobby!!!!!

@cfmechanic

Жыл бұрын

On my 440 sbc motor I retarded my cam 4 degrees to air cylinder filling at higher rpms and also to help prevent detonation

Love watching you guys, very intelligent and informative cheers!!

Excellent video. Thank you for posting. Keep up the good work

I learn something new every day. Well done!

Watching all the videos yall make gave me the confidence to port my heads myself

I'm prepping to rebuild a 302 SBF for our Father/Son project truck. Im no expert and have been struggling to understsnd cam degreeing. You video just cleared it all up! Love the waybyou explained this. ❤

Great video guys. Thank you.

Great video guys. Thanks for the great content

Thanks for the upload 😀 always looking to learn new shit.

Hey chief and Jackie guys that was an amazing and informative way to show how to degree a cam can't wait to see that badboy in final assembly and ready to see what it will do if you guys dyno that badboy as always keep up the awesome work guys 💪💯

@justinshearer3016

Жыл бұрын

thanks Juan!!!

Great video, understand how to and why to degree a cam much better now, listener #8.

Great Content 👍and Learning how to degree your cam Have a Great Day 👍 God Bless America 🇺🇸🙏🇺🇸

Good to have a MW upload to get by the work day. Hope all is good🙏🏽 🔥👍🏽🔥

Like the new shop cat hangout. Mine enjoy theirs. They play king of the hill to see who gets the top to look out the window.. Precision is the key to longevity in any machine. Nice work on stressing that.

Great vidja as always ❤

Great video I subscribed watching this.

This is awesome thank you for the info

Legit you are really good at explaining things, I've watched alot of videos on degreeing a cam and I actually followed most of what you said with out having am anurizm😅😅😅

@jrdmotorsports9718

Жыл бұрын

He is actually very well spoken. Me on the other hand, speak "Confusion" as a second language, then having to use my third language, analogies, to real in said confusion for the sake of comprehension...

I'm learning so.ethi g new ,thanks Chief

Great video, I never seen anybody do that before. Great explanation, 👍

You go Chief. Cool to see you right there Jackie.

We’ll work just stopped it’s time to watch Chief and Jackie 👍😎✌️

Thanks for sharing the tech Chief

I haven't degreed a cam in 30 years, takes me back to some great times and good friends.

Thanks again for another great episode from you two.

@MidwestStreetCarsAuto

Жыл бұрын

thanks for watching!

The little bits are critical as you already know great content

I figured it out! These are cat videos, where sometimes mechanicing breaks out. Lol. Your videos are great for the guys like me still trying to make the best out of what I got with my whip. Super informational, and freaking hilarious.

Thanks for school today buddy 💪I love the Educational stuff .

Good lesson Chief loved it great job how 2degree a camshaft .. Sweet...loved it..

I love all your content and videos. I love all your kitty 🐈😺🐈😺 cats, especially the one that inspects all your parts.

Thank u for the video chief and jackie

Baby cat just like yeaaaah buddy, all the time 😂💚🏁 Edit: im late because nightshift life!

Great video keep up the good work.

To learn something and laugh is the best. Thanks bro 😎

Well, I understand the why a lot better but I am going to watch a few more times to get the how. Lots of good info here. Thank you, Chief and Jackie. It's not as exciting as smokey burnouts but I am actually learning something, and that is always a good thing!

@MidwestStreetCarsAuto

Жыл бұрын

smokey burnouts coming very soon!

I could use this dude advice on my caddy 500ci build.. great stuff chief

Love you and Jackie and your show Steve uk

That is a WIDE Lobe Separation Angle if that's a carbed engine. I believe this is the best explanation of the cam degree process I have come across! Thank you for this!

great video man!

Truly nice work I really understand this a lot better